The effect of process variables on the characteristics of carbon nanotubes obtained by spray pyrolysis

A simple spray pyrolysis setup is used to grow multi-walled carbon nanotubes (MWCNTs), from a ferrocene solution in benzene as precursor. The effects of process variables such as growth temperature, position of the aerosol generator and position in the reactor where the sample was formed were investigated. These variables have a strong influence on the graphitization degree, homogeneity, diameter and alignment of the nanotubes, as observed by TEM, SEM, XRD and Raman spectroscopy. Vertically aligned MWCNT arrays with high density were obtained in large areas (10 × 10 mm²), with high yield (2.1 mg cm⁻²) and at a growth rate at 1.43 μm min⁻¹, by a suitable choice of the experimental conditions.     

The beneficial impacts of functional groups of CNT on structure and gas separation properties of PEBA mixed matrix membranes

Incompatibility between filler and polymer chains accompanied by particle agglomeration has a detrimental effect on the performance of mixed matrix membranes (MMMs). To obviate intermolecular forces of different additives, functional groups (-COOH, –NCO, and –NH₂) were grafted on the surface of multi-walled carbon nanotubes (MWCNTs) which were then incorporated as fillers in the poly(ether-block-amide) (PEBA) polymeric matrix in the range of 0.1–1 wt% loading. CO₂ permeability and ideal CO₂/N₂ and CO₂/CH₄ selectivity of MMMs was compared with the neat membrane, and the results revealed favorable enhancement and surpassed CO₂/N₂ Robeson's upper bound under 4–10 bar in the range of 15–55 °C. Mixed gas separation performance of MMMs, which is of vital importance in industrial applications, was also investigated. The results indicate that MWCNT-NCO created superior grafts with the polymer chains, and MMMs with this additive had a better gas separation performance with high mechanical and thermal stability.     

Oxalic acid removal from wastewater using multi-walled carbon nanotubes: Kinetic and equilibrium analysis

Oxalic acid adsorption from aqueous solution is studied in this work. Multi-walled carbon nanotubes (MWCNT) were used as an adsorbent. The investigated adsorption variables are equilibrium time, initial acid concentration, and temperature. The experimental results were presented using equilibrium isotherm and kinetic models. The used equilibrium models are Langmuir, Freundlich, and Temkin adsorption isotherms. And the kinetic models are Elovich, Lagergren pseudo-first-order and pseudo-second-order kinetic models. The thermodynamics studies were carried out at three different temperatures: 278, 298, and 318 K. Langmuir isotherm was the best fitted equilibrium model for the experimental data. The all applied kinetic models fitted the data suitably.     

EMI shielding performance of electroless coated iron nanoparticles on graphite in low-density polyethylene composite for X-band applications

In the proposed work, an investigation of shielding effectiveness (SE) for varying compositions of Graphene, Multiwall carbon nanotubes (MWCNT), and Iron nanoparticles coated on Graphite (Fe@Graphite) was conducted in X-band (8.2 GHz–12.4 GHz). All these are mixed in an LDPE matrix. The nanomaterial was subjected to chemical characterization, i.e., Scanning electron microscopy (SEM), X-ray diffraction (XRD), and vibrating sample magnetometry (VSM). The shielding observed is dominantly due to absorption. The lattice structure which facilitates the shielding due to absorption was the hexagonal graphite structure on whose surface iron nanoparticles were embedded and used as the magnetic filler. At the same time, Graphene and MWCNT act as electrically conducting fillers. The Total shielding effectiveness(SE_T) was maximum for LDPE, MWCNT, Graphene, and Fe@Graphite, in the ratio of 50: 5: 25: 20 by weight %, and is 49 dB at 9.65 GHz for a sample thickness of 3 mm.     

Nanotubes as polymer composite reinforcing additive materials – A comparative study

Nitrogen-doped bamboo-shaped carbon nanotubes (N-BCNTs) and their non-doped conventional counterparts, multiwalled carbon nanotubes (MWCNTs) were compared as polymer reinforcing additives in polyvinyl chloride (PVC) matrix. The nanotubes were synthetized by catalytic chemical vapor deposition (CCVD) method. The purity of both nanotubes was measured by thermogravimetric analysis (TGA) and found to be >91%. Further analysis on the morphology and size of the carbon nanotubes (CNTs) were performed by transmission electron microscopy (TEM). The PVC powder was impregnated with CNTs in ethanol by using tip ultrasonicator. The dispersion media was evaporated, and the CNT/PVC powder was used to produce polymer fibers. The orientation of carbon nanotubes in the PVC matrix was characterized by scanning electron microscopy (SEM), and the presence of nanotubes were confirmed in case of all PVC samples. It can be observed on the SEM images that the nanotubes are fully covered with PVC. The tensile strength of the nanotube containing samples was tested and the N-BCNT/PVC composite was found to be better in this sense, thanks to the extraordinary structure of the nanotube. In case of the N-BCNT/PVC composite the measured young modulus was 39.7% higher, while the elongation at brake decreased by 33.6% compare to the MWCNT/PVC composite. These significant differences in the mechanical properties of the composites can be explained with the stronger interaction between N-BCNTs and PVC.     

Development An Amperometric Microbial-enzyme Hybrid Cholesterol Biosensor Based On Ionic Liquid MWCNT Carbon Paste Electrode

In this study we report the development of an amperometric cholesterol biosensor based on cholesterol oxidase from Pseudomonas sp. and catalase immobilized in carbon paste electrode (CPE) modified with multiwall carbon nanotubes (MWCNT) and ionic liquid (IL). The working electrode (CPE/MWCNT-IL/Microorganism (MO)-Catalase) was characterized by impedance spectroscopy and cyclic voltammetry at different stages of its construction. This proposed cholesterol biosensor performed linear relationship in the range of 5–600 μM with a low detection limit of 1.52 μM. The biosensor showed good sensitivity and high selectivity and it was successfully applied for the measurement of cholesterol levels in lyophilized serum samples.     

Enhanced mechanical properties of MWCNT reinforced ABS nanocomposites fabricated through additive manufacturing process

Multiwall carbon nanotubes (MWCNTs) can be spread out in acrylonitrile butadiene styrene (ABS) using a twin-screw micro-compounding extruder. It can significantly improve the mechanical properties of 3D-printed objects. Dispersed MWCNTs in pure ABS to develop the nanocomposites through a two-time micro compounding extruding process. 3D printed filaments with a diameter of 1.75 mm have been prepared by processing the acquired composite structure through a filament extruder. The mechanical and other properties of 3D printed pure ABS and 1, 2, and 3 wt.% of the fused deposition modeling (FDM) process were studied for MWCNTs/ABS composites. Compared with pure ABS, the tensile and thermal properties were significant for 1, 2, and 3 wt.% of MWCNTs/ABS composites. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM) were also analyzed for 0, 1, 2, and 3 wt.% MWCNTs/ABS composites. Additive manufacturing (AM) processes have recently been emphasized for their applications in electronics, aerospace, biomedical, and automobile engineering.     

甲醇在Pd基电催化剂上的氧化

以多壁碳纳米管(MWCNT)和碳黑为载体, 用交替微波加热的方法制备了担载型Pd电催化剂, 并表征了其微观形貌和电化学性能. 透射电镜(TEM)和X射线衍射(XRD)结果显示, Pd在MWCNT载体上有较好的分散度, 平均粒径为4 nm. 循环伏安、计时电位和交流阻抗的测试结果表明, 在碱性溶液中, Pd/MWCNT显示出良好的甲醇氧化性能. 在Pd/MWCNT催化剂上, 甲醇氧化的起始电位比在Pt/C上负移100 mV 左右. Pd/MWCNT高的催化活性不仅与它的高的活性表面积有关, 而且和Pd与载体MWCNT之间的协同作用有关.     

Preparation of polystyrene/MWCNT‐Valine composites: Investigation of optical,morphological, thermal,and electrical conductivity properties

The attempt of this research was to examine the effect of multiwalled carbon nanotube (MWCNT)‐Valine as efficient fillers on the thermal, optical, and electrical behaviors of polystyrene (PS). To reduce aggregation and obtain uniform spreading of fillers into the PS, at first, MWCNTs' surfaces were modified by Valine amino acid. Then, different contents of MWCNT‐Valine (0.5, 1, and 2 wt%) were added to PS by ultrasonication processes. The field emission scanning electron microscopy and transmission electron microscopy results showed a uniform distribution of modified MWCNTs into the matrix. The thermal properties of nanocomposites were improved by increasing nanofiller content. In addition, embedding of MWCNT‐Valine into the PS matrix increased the electrical conductivity of nanocomposites in comparison with pure PS.