一种生态友好粉煤灰基地质聚合物的合成及光催化性能

以乌洛托品为孔形成剂,制备出孔结构可调控的粉煤灰基地质聚合物;通过半导体耦合设计,合成出In_2O_3和NiO双负载粉煤灰基地质聚合物催化剂;采用XRF、TGA/DSC、FESEM、XRD、FT-IR、UV-Vis等对催化剂的组成、结构及性能进行表征,考查了该催化剂体系对模拟印染废水的光催化降解活性、降解机理及反应动力学。结果表明:孔形成剂的掺入能够显著地改善地质聚合物的孔结构,调变BET比表面积及介孔体积;双负载5%In_2O_3及1%NiO的粉煤灰基地质聚合物催化剂对碱性品绿染料的最高降解率(95.65%),归因于In_2O_3与NiO形成的p-n结半导体耦合体系以及In_2O_3与PAFAG载体之间产生强相互作用,改善了光生电子-空穴对的分离效率,从而提高了光催化染料降解活性。     

基于果蝇算法优化广义回归神经网络的矢量水听器的DOA估计

为了提高矢量水听器阵列对窄带信号的DOA估计精度,运用果蝇算法优化广义回归神经网络,通过对阵列协方差矩阵实值化,并提取信号子空间的基作为样本特征进行网络训练,构建了果蝇算法优化下的广义回归神经网络,实现了基于矢量水听器阵列的水下声源的DOA估计.仿真实验结果表明,方法泛化性能较好,能解决输入维数过大的问题,且运行时间短,DOA估计精度高,具有较强的工程应用价值.     

Fly ash particles and precipitated silica as fillers in NR/CR vulcanizates under thermal and thermal‐oil ageing

The loading effect of precipitated silica (PSi) and fly ash‐based silica (FASi) on mechanical properties of natural rubber/chloroprene (NR/CR) under thermal and thermal‐oil ageing was investigated with variation in NR content in the NR/CR blends. The selected results were compared with vulcanized NR/nitrile rubber (NR/NBR) blends. The cure time of CR vulcanizate was found to decrease with increasing NR content, but increased with silica fillers. The Mooney viscosity for CR vulcanizates reduced with increasing NR content. The addition of NR had no effect on tensile modulus and tensile strength for the FASi filled NR/CR, but the opposite trend was observed for the PSi filled NR/CR. The post‐curing effect was more significant in PSi filled NR/CR than in FASi filled NR/CR. The tensile strength of the NR/CR vulcanizates was slightly reduced after thermal ageing especially at high NR content, more extreme reduction being found by thermal‐oil ageing. The elongation at break of NR/CR with both silica fillers ranged from 400 to 900%. The hardness results were similar to the tensile modulus. The addition of PSi in NR/CR considerably increased the tear strength, but less pronounced effect was found for FASi. The resilience properties of NR/CR tended to decrease with increasing silica content. The compression set became poorer when NR content was increased. The PSi showed higher improvement in compression set than the FASi. The effects of silica and ageing on the mechanical properties for NR/CR vulcanizates were similar to those for NR/NBR vulcanizates. Copyright © 2009 John Wiley & Sons, Ltd.     

混煤煤灰熔融特性及矿物质形态的研究

本文对混煤熔融特性温度进行测定，并利用X-射线衍射分析对混煤煤灰的矿物组成进行试验分析，结果表明：混煤可改变原煤的结渣程度；混煤灰熔点与混煤比不成线性关系变化是混煤煤灰的低温共熔现象所致；在变形温度T1下煤灰中矿物质莫来石对煤灰熔融特性温度影响较大，莫来石含量越高，灰熔点越高．     

DSC and TA/MS studies on formation and decomposition of polychlorinated dibenzo-p-dioxines and dibenzofuranes

The effect of oxydation of particulate carbon as a part of fly ash has been studied by mean of differential scanning calorimetry (DSC) and simultaneous thermal analysis/mass spectrometry (TA/MS). The results from different carbon modifications added to fly ash were discussed and compared to those of the pure samples.

---

Zusammenfassung Mittels DSC und Thermoanalyse/Massenspektrometrie wurde der Effekt der Oxidation von Kohlenstoff als Teil von Flugasche untersucht. Die durch Zusatz verschiedener Kohlenstoffarten zu Flugasche erhaltenen Ergebnisse wurden diskutiert und mit denen von reinen Proben verglichen.

     

The role of MgO in the binding of SO<Subscript>2 </Subscript>by lime-containing materials

Summary The results of investigation of MgO participation in the binding of SO₂ with lime-containing materials as sorbents are presented. Experiments of SO₂ binding into solid phase using model samples of reactive grade MgO and CaO varying the mole ratio of MgO/CaO from 9:1 to 1:9 were carried out. Besides, dolomite and limestone samples with different MgO/CaO mole ratio (from 1.24 to 0.13) and samples of ashes formed at combustion of Estonian oil shale (containing 35-40% of carbonates) and its semicoke were studied Initial samples, intermediate and final products were subjected to chemical, IR-spectroscopy, X-ray and BET specific surface area analyses. The results of the present study confirmed the active participation of MgO in the binding of SO₂ into the solid phase. In addition to CaSO₄ the formation of Ca,Mg-double sulphate CaMg₃(SO₄)₄ and -MgSO₄ was observed. The presence of CaMg₃(SO₄)₄ was fixed in a large temperature range 400-900°C and that of -MgSO₄ in between 500-700°C. The optimum temperature range for formation and durability of CaMg₃(SO₄)₄ was 700-800°C.     

基于矿物质定量热分析的灰熔融反应动力学

利用矿物质定量热分析理论对三种典型煤样灰熔融过程进行了详细分析,借助化学反应动力学相关概念,计算了灰样熔融反应动力学参数,结果表明:灰样熔融过程呈明显的三阶段反应过程,即初始熔融阶段、矿物共熔阶段以及熔融末期;熔融初始阶段反应活化能均大于后面两个阶段,矿物共熔过程活化能较初始阶段明显下降;在理论上证明了灰熔融逐渐加剧的过程。     

Effect of sintering temperature on mechanical behaviour and bioactivity of sol-gel synthesized bioglass-ceramics using rice husk ash as a silica source

Bioglass-ceramics with SiO₂-Na₂O-CaO composition was prepared by sol-gel method using rice husk ash as a silica source. Material was sintered at different temperatures ranging from 900 to 1050 °C for 2 h. Phase-formation behaviour, densification characteristics, and mechanical strength of glass-ceramics were investigated. The material sintered at 1000 °C showed a good mechanical strength. Mechanical properties were correlated with microstructural features. Both in vitro bioactivity and biodegradability of sintered material were investigated by incubating in simulated body fluid and Tris buffer solution, respectively. Scanning electron microscopy, energy dispersive spectroscopy and X-ray diffraction were used to investigate the surface deposition during body fluid incubation. Both bioactivity and degradability decreased with increase in sintering temperature.     

Utilization of Fly Ash Nanofluids in Two-phase Closed Thermosyphon for Enhancing Heat Transfer

This study investigates how fly ash nanofluids affect the thermal performance of a two-phase closed thermosyphon at various states of operation. The utilization of nanofluids obtained from X₂O₃-type oxides, such as Al₂O₃, Fe₂O₃, or CuO, on the improvement of two-phase closed thermosyphon performance was reported in a number of studies in the literature. The present study experimentally demonstrated the effect of using a nanofluid obtained from fly ash comprised of various types of metal oxides in varying ratios on improving the performance of a two-phase closed thermosyphon. The fly ash was obtained from the flue gas that was captured in the cyclones of the Yatagan thermal power plant (Turkey). Triton X-100 (Dow Chemical Company) dispersant was used in the study to produce the 0.2% (wt) fly ash/water nanofluid via direct synthesis. A straight copper tube with an inner diameter of 13 mm, outer diameter of 15 mm, and length of 1 m was used as the two-phase closed thermosyphon. The nanofluid filled 33.3% (44.2 ml) of the volume ofthe two-phase closed thermosyphon. Three heating power levels (200, 300, and 400 W) were used in the experiments with three different flow rates of cooling water (5, 7.5, and 10 g/s) used in the condenser for cooling the system. A increase of 26.39% was achieved in the efficiency of the two-phase closed thermosyphon when 4% (wt) fly ash containing nanofluid was used to replace deionized water at a heat load of 200 W and with a cooling water flow rate of 5 g/s.