In situ measurements of the spectral emittance of coal ash deposits

The spectral emittance of deposits left by bituminous and sub-bituminous coals under oxidizing conditions have been measured in situ. Pulverized coal is injected into a down-fired entrained-flow reactor. Ash accumulates on a probe in the reactor effluent and radiation emitted by the ash layer is recorded using a Fourier transform infrared (FTIR) spectrometer. Values for the spectral emissive power emitted by the ash and the surface temperature of the ash are extracted from these data. These results are then used to calculate the spectral emittance of the deposit. The spectral emittances of ash deposits formed by burning Illinois #6 (bituminous) coal and Powder River Basin (sub-bituminous) coal were measured between 3000 and 500 wavenumbers. The spectral emittance of the deposit left by the bituminous coal has a constant value of approximately 0.46 between 3000 and 2400 wavenumbers. Between 2200 and 1200 wavenumbers, the spectral emittance of the deposit increases from approximately 0.47 to approximately 0.61. Between 1200 and 500 wavenumbers, the spectral emittance is relatively constant at 0.61. The spectral emittance of the deposit left by the sub-bituminous coal is also relatively constant between 3000 and 2400 wavenumbers at a value of 0.29. Between 2200 and 500 wavenumbers, the spectral emittance of deposits from the sub-bituminous coal increases from approximately 0.29 to 0.55. Differences between these spectral emittance measurements and those measured ex situ illustrate the importance of making in situ measurements. Band emittances were calculated using the measured spectral emittances, and band emittances of the deposits are reported as functions of temperature.     

Synthesis,Characterization, and Catalytic Behavior of Bamboo Rice Husk Ash

In this paper, we report the use of bamboo rice husk ash as an efficient, greener, reusable, and biodegradable heterogeneous catalyst for the synthesis of tetrahydro‐4H ‐chromene‐3‐carbonitriles via the one‐pot three‐component reaction of malononitrile with aromatic aldehydes and dimedone or 1,3‐cyclohexanedione. The formation of bamboo rice husk ash‐silica has been confirmed by several analytical techniques.     

REMEDIATION OF POLLUTED SOILS BY UTILIZING HYDROTHERMALLY TREATED CALCAREOUS FLY ASHES

This paper investigates a treated fly ash to act as a synthetic zeolite to remediate soils polluted with heavy metals and metalloids （As, Pb, Cu, Zn, Fe, Cd and Mn）. Four types of such ＇zeolites＇ were synthesized by hydrothermal treatment of a calcareous fly ash derived from Greek lignite-fired power plants： two with excess of sodium hydroxide in a solid/liquid ratio of 50 g·L^-1, and two with excess of fly ash in a solid/liquid ratio of 100g·L^-1. Soil samples were obtained from a former mining site at Lavrion, Greece. Mobilization and transfer of metals to the retention agents was effected by using HCI aq 1M, with satisfactory results with respect to As, Pb, Cu, Mn and Cd. The great variety of metal complexes in soil was found to be of major importance for the effectiveness of the overall process. The final products were solidified either on their own, or by using additives such as lime and cement.     

VITRIFICATION OF LIGNITE FLY ASH AND METAL SLAGS FOR THE PRODUCTION OF GLASS AND GLASS CERAMICS

This work focuses on the production of glass and glass-ceramics by using industrial wastes or by-products, e.g., two fly ashes from the combustion of lignite, a slag from the production of Fe-Ni and a slag from the making of steel. Vitrification took place at 1 350°-1450℃ and crystallization was achieved by heat treatment at 900, 950 and 1 000℃. The capability of the waste to be vitrified and subsequently devitrified was determined by XRD techniques. The crystalline phase depends greatly on the structure of the by-product and the heat treatment. The final products showed low leachability and good hardness.     

A qualitative study on the pulsatile flow phenomenon in a dense fly ash pneumatic conveyor

Understanding of the dynamic particulate flow structures within a dense gas-fly ash pneumatic conveyor must be improved in order to better aid its design guidance.The complex pulsatile movement of the gas-fly ash mixture dominates the flow performance within the pipeline,and historically,non-invasive measurement devices such as the electrical capacitance tomography（ECT） were often used to sufficiently capture the flow dynamics.However,inadequate studies have been conducted on the pulsatile flow phenomenon,which directly relate to the gas-fly ash two-phase flow performance.This paper aims to investigate the pulsatile flows using an ECT device.Initially,pulsatile flow patterns under various experimental conditions were obtained through ECT.Pulses within a flow were then characterised into pulse growth and decay segments,which represent the superficial fluidisation and deaeration processes during conveying.Subsequently,structural and statistical analyses were performed on the pulse growth and decay segments.Results suggested that the increasing air mass flow rate led to the decrease of the superficial fluidisation/deaeration magnitude,however,the increase of the superficial fluidisation/deaeration durations.Also,the air mass flow rate was indicated as the dominant factor in determining the pulsing statistical parameters.This research provides fundamental insights for further modelling the dense fly ash pneumatic flows.     

New and Simple Syntheses of the Attractants of the Female Melon Fly,Dacus cucurbitae

The attractant of the female melon fly, (E)-6-nonenyl acetate, and the two analogs, (E)-7-dodecenyl acetate and (E)-7-decenyl acetate were synthesized via hydrozirconation to control the regioselective coupling reactions and resulted in good yields.     

Radon activity and exhalation rates measurements in fly ash from a thermal power plant

Radon exhalation rate from fly ash samples and from the homogeneous mixture of fly ash of different proportions additive in soil and cement samples to study the effect of the addition was measured by cup dosimeter using SSNTDs. Radon activities were found to vary from (1018±38) to ( whereas the radon exhalation rate varied from (366±14) to . A gradual increase has been observed in samples having fly ash as an additive in cement samples whereas a gradual decrease was observed in soil samples after the addition of fly ash. ²³⁸U in fly ash was measured by a low-level NaI (Tl)-based gamma ray spectrometer. The results show enhancement in U concentration in fly ash as compared to coal samples, whereas radon exhalation rate is less in fly ash samples.     

Valorization of Fly Ashes and Sands Wastes from Biomass Boilers in One-Part Geopolymers

Fly ash (FA) and exhausted bed sands (sands wastes) that are generated in biomass burners for energy production are two of the wastes generated in the pulp and paper industry. The worldwide production of FA biomass is estimated at 10 million tons/year and is expected to increase. In this context, the present work aims to develop one-part alkali-activated materials with biomass FA (0–100 wt.% of the binder) and sands wastes (100 wt.% of the aggregate). FA from two different boilers, CA and CT, was characterized and the mortar’s properties, in the fresh and hardened conditions, were evaluated. Overall, the incorporation of FA decreases the compressive strength of the specimens. However, values higher than 30 MPa are reached with 50 wt.% of FA incorporation. For CA and CT, the compressive strength of mortars with 28 days of curing was 59.2 MPa (0 wt.%), 56.9 and 57.0 MPa (25 wt.%), 34.9 and 46.8 MPa (50 wt.%), 20.5 and 13.5 MPa (75 wt.%), and 9.2 and 0.2 MPa (100 wt.%), respectively. The other evaluated characteristics (density, water absorption, leached components and freeze–thaw resistance) showed no significant differences, except for the specimen with 100 wt.% of CA. Therefore, this work proved that one-part geopolymeric materials with up to 90 wt.% of pulp and paper industrial residues (FA and sand) can be produced, thus reducing the carbon footprint associated with the construction sector.     

以粉煤灰为原料采用两步法制备高纯度ZSM-5型沸石的研究

采用经碱熔融-离心提取处理后的粉煤灰为原料,经水热反应研究两步法合成高纯度ZSM-5型沸石的过程,探讨了碱灰比、焙烧温度对硅铝溶出量的影响,研究了碱度、晶化时间、晶化温度与硅铝比对合成ZSM-5型沸石的影响.结果表明:碱灰比为2.3∶1,焙烧温度为680 ℃时可获得最高的硅铝溶出量;当SiO2/Na2O =7(摩尔比),SiO2/Al2O3=45(摩尔比),晶化时间为68 h,晶化温度为180 ℃时可获得高纯度的ZSM-5型沸石.     

Sobralene,a new sex-aggregation pheromone and likely shunt metabolite of the taxadiene synthase cascade,produced by a member of the sand fly Lutzomyia longipalpis species complex

A new sex-aggregation pheromone, sobralene, produced by the sand fly Lutzomyia longipalpis from Sobral (Ceará State, Brazil) is shown to have the novel 6,12-membered ring-fused diterpene structure 3. It is proposed that sobralene is a likely shunt metabolite of the taxadiene synthase-catalysed cyclisation of geranygeranyl diphosphate.