Ruthenium-based Conjugated Polymer and Metal-organic Framework Nanocomposites for Glucose Sensing

Many studies have focused on effective ways to exploit enzyme immobilization on an electrode surface to help improve the performance of enzymatic electrochemical biosensors. Herein, a novel glucose sensor was fabricated by immobilizing glucose oxidase (GOx) onruthenium-based conjugated polymer (CP) and metal-organic framework (MOF) nanocomposites. This has not only reduced the applied potential to 0.2 V (vs. Ag/AgCl), but also improved the effective surface area for enzyme immobilization.PPG@Ru@UiO-66-NH₂ was tailored by controlled chemical synthesis from a pre-synthesized water-soluble conjugated polymer (poly(N-phenylglycine)) and metal-organic framework (UiO-66-NH₂). The resulting nanocomposites were characterized using Fourier transform infrared spectroscopy, X-ray fluorescence, scanning electron microscopy, and cyclic voltammetry. The PPG@Ru@UiO-66-NH₂/GOx coated electrodedisplayed a linear measurementrange for glucose from 1 mM to 10 mM, with a sensitivity of 45.92 μA ⋅ mM⁻¹cm⁻¹ and limit of detection of5 μM( ). Furthermore, the practical application of the fabricatedglucosesensor was tested in simulative blood samples with satisfactoryaccuracy. This approach alsoopens a new door for applications regarding both enzymatic electrochemical biosensors and enzymatic biofuel cells (EBFCs).     

累托石/聚丙烯插层纳米复合材料的制备与性能

采用熔融共混法制备了有机改性累托石 (OREC)粘土 均聚聚丙烯 (PP)纳米复合材料 ,以X 射线衍射分析 (XRD)及透射电子显微镜分析 (TEM)观察了复合材料的相貌结构 ,研究了复合材料的力学性能及热性能 .结果表明 ,OREC在添加份数较少时可与均聚聚丙烯熔融插层形成插层型聚丙烯纳米复合材料 ,该复合材料与纯PP相比 ,具有较高的拉伸强度、断裂伸长率及冲击强度 .在有机粘土添加 2 %时 ,复合材料的拉伸强度、断裂伸长率、冲击强度最高 ,与纯PP相比 ,2 %添加量的聚丙烯纳米复合材料拉伸强度提高 6 5 7% ,断裂伸长率提高 2 89 3% ,冲击强度提高 14 1% ,10 %失重率时对应的热分解温度提高 50K .     

Rigid nanoscopic containers for highly dispersed, stable metal and bimetal nanoparticles with both size and site control

We demonstrate a novel strategy for the preparation of mesoporous silica-supported, highly dispersed, stable metal and bimetal nanoparticles with both size and site control. The supporting mesoporous silica, functionalized by polyaminoamine (PAMAM) dendrimers, is prepared by repeated Michael addition with methyl acrylates (MA) and amidation reaction with ethylenediamine (EDA), by using aminopropyl-functionalized mesoporous silica as the starting material. The encapsulation of metal nanoparticles within the dendrimer-propagated mesoporous silica is achieved by the chemical reduction of metal-salt-impregnated dendrimer-mesoporous silica by using aqueous hydrazine. The site control of the metal or bimetal nanoparticles is accomplished by the localization of inter- or intradendrimeric nanoparticles within the mesoporous silica tunnels. The size of the encapsulated nanoparticles is controlled by their confinement to the nanocavity of the dendrimer and the mesopore. For Cu and Pd, particles locate at the lining of mesoporous tunnels, and have diameters of less than 2.0 nm. For Pd/Pt, particles locate at the middle of mesoporous tunnels and have diameters in the range of 2.0-4.2 nm. The Pd and Pd/Pt nanoparticles are very stable in air, whereas the Cu nanoparticles are stable only in an inert atmosphere.     

Studies on polymers and composites from lignin and fiber derived from sugar cane

Sugarcane fiber (i.e. bagasse) lignin has a larger fraction of aromatics unsubstitution in the ortho position than hardwood or softwood lignin and hence has the greater ability to be derivatized. Furthermore, organosolv lignin has a higher purity than sulfonated and kraft lignins. This work examines the purification of organosolv lignin derived from bagasse and the physico‐chemical properties of the lignin and lignin‐phenol formaldehyde (PF) resin coatings, and composites. The wetability tests have shown that lignin and lignin‐PF resin films are effective water barrier coatings, though the contact angles of lignin‐PF resin films were considerably less than the wax films. The overall mechanical properties (i.e. peak stress, peak strain and modulus) of the bagasse fiber composites were lower than the values obtained with the composites without the inclusion of bagasse fiber. Copyright © 2007 John Wiley & Sons, Ltd.     

Strategies for hydrogen storage in metal--organic frameworks

Increased attention is being focused on metal-organic frameworks as candidates for hydrogen storage materials. This is a result of their many favorable attributes, such as high porosity, reproducible and facile syntheses, amenability to scale-up, and chemical modification for targeting desired properties. A discussion of several strategies aimed at improving hydrogen uptake in these materials is presented. These strategies include the optimization of pore size and adsorption energy by linker modification, impregnation, catenation, and the inclusion of open metal sites and lighter metals.     

Continuous,single-component,crystalline networks in polymer matrix and their vapor doping

It is shown, for the first time, that single-component continuous networks of a low molecular weight electron acceptor additive can be grown in a polymer matrix. Such networks can be doped using, e.g., iodine vapor and converted into conductive CT complexes without losing continuity, thereby making the polymer film conductive. Polyethylene films with tetrathiotetracene networks are obtained, and their doping with iodine vapor in air is investigated by means of conductivity and spectrophotometry in the visible range. It is concluded that doping of the surface layer of the microcrystallites is sufficient to observe a significant increase in the film conductivity, which makes possible the use of such systems as sensors.     

Mechanical and thermal properties of poly-ether ether ketone reinforced with CaCO3

CaCO₃/PEEK (poly-ether ether ketone) composites were prepared on a twin-screw extruder with different mass ratio of CaCO₃/PEEK from 0% to 30%. Four types of particles were used as filler in PEEK matrix. The influence of surface treatment with sulfonated PEEK (SPEEK) of the particles on the mechanical and thermal properties of the composites was studied. The experiments included tensile tests, flexural tests, notched Izod impact tests, TGA, DSC and SEM. The modulus and yield stress of the composites increased with CaCO₃ particles loadings. This increase was attributed to the bonding between the particles and the PEEK matrix, as can be proved by the SEM pictures of tensile fracture surface of the composites. The impact strength of the composites was modified by the SPEEK coated on the CaCO₃ particle surface. DSC experiments showed that the particle content and surface properties influenced the glass transition temperature (T_g) and melting temperature (T_m) of the composites. The T_g increased with the content of fillers while T_m decreased. In this study the fillers treated were found to give better combination properties, which indicated that SPEEK played a constructive role in the CaCO₃/PEEK composites.     

Reversible anion exchanges between the layered organic-inorganic hybridized architectures: syntheses and structures of manganese(II) and copper(II) complexes containing novel tripodal ligands

Six noninterpenetrating organic-inorganic hybridized coordination complexes, [Mn(3)(2)(H(2)O)(2)](ClO(4))(2).2 H(2)O (5), [Mn(3)(2)(H(2)O)(2)](NO(3))(2) (6), [Mn(3)(2)(N(3))(2)].2 H(2)O (7), [Cu(3)(2)(H(2)O)(2)](ClO(4))(2) (8), [Mn(4)(2)(H(2)O)(SO(4))].CH(3)OH.5 H(2)O (9) and [Mn(4)(2)](ClO(4))(2) (10) were obtained through self-assembly of novel tripodal ligands, 1,3,5-tris(1-imidazolyl)benzene (3) and 1,3-bis(1-imidazolyl)-5-(imidazol-1-ylmethyl)benzene (4) with the corresponding metal salts, respectively. Their structures were determined by X-ray crystallography. The results of structural analysis of complexes 5, 6, 7, and 8 with rigid ligand 3 indicate that their structures are mainly dependant on the nature of the organic ligand and geometric need of the metal ions, but not influenced greatly by the anions and metal ions. While in complexes 9 and 10, which contain the flexible ligand 4, the counteranion plays an important role in the formation of the frameworks. Entirely different structures of complexes 5 and 10 indicate that the organic ligands greatly affect the structures of assemblies. Furthermore, in complexes 5 and 6, the counteranions located between the cationic layers can be exchanged by other anions. Reversible anion exchanges between complexes 5 and 6 without destruction of the frameworks demonstrate that 5 and 6 can act as cationic layered materials for anion exchange, as determined by IR spectroscopy, elemental analyses, and X-ray powder diffraction.     

C/C-SiC复合材料的制备及其湿式摩擦磨损性能研究

采用T700炭纤维针刺毡,经超声振动渗硅、化学气相沉积(CVD)、硅化处理及液相浸渍/炭化新工艺制备SiC呈"岛状"分布的C/C-SiC复合材料,利用偏光显微镜和扫描电子显微镜观察其微观组织结构并分析其形成机制,在MM-1000型湿式摩擦磨损试验机上研究C/C-SiC复合材料的摩擦磨损性能.结果表明:在初始转速恒定的条件下,动摩擦系数随制动比压的增加而逐渐减小;当制动比压恒定时,摩擦系数随初始转速的增加呈现出先增大而后降低的趋势;在本文试验条件下,摩擦系数稳定在0.088～0.126之间;在300次磨损试验后,其磨损量检测值为0.     

Recent Progress in Iron-Based Microwave Absorbing Composites: A Review and Prospective

With the rapid development of communication technology in civil and military fields, the problem of electromagnetic radiation pollution caused by the electromagnetic wave becomes particularly prominent and brings great harm. It is urgent to explore efficient electromagnetic wave absorption materials to solve the problem of electromagnetic radiation pollution. Therefore, various absorbing materials have developed rapidly. Among them, iron (Fe) magnetic absorbent particle material with superior magnetic properties, high Snoek’s cut-off frequency, saturation magnetization and Curie temperature, which shows excellent electromagnetic wave loss ability, are kinds of promising absorbing material. However, ferromagnetic particles have the disadvantages of poor impedance matching, easy oxidation, high density, and strong skin effect. In general, the two strategies of morphological structure design and multi-component material composite are utilized to improve the microwave absorption performance of Fe-based magnetic absorbent. Therefore, Fe-based microwave absorbing materials have been widely studied in microwave absorption. In this review, through the summary of the reports on Fe-based electromagnetic absorbing materials in recent years, the research progress of Fe-based absorbing materials is reviewed, and the preparation methods, absorbing properties and absorbing mechanisms of iron-based absorbing materials are discussed in detail from the aspects of different morphologies of Fe and Fe-based composite absorbers. Meanwhile, the future development direction of Fe-based absorbing materials is also prospected, providing a reference for the research and development of efficient electromagnetic wave absorbing materials with strong absorption performance, frequency bandwidth, light weight and thin thickness.