晶化时间对ZSM-5/MCM-48复合分子筛结构及MTG反应性能的影响

采用两步晶化法制备ZSM-5/MCM-48微介孔复合分子筛,通过调变前驱体溶胶的晶化时间获得不同结构的ZSM-5/MCM-48基分子筛催化剂。采用XRD、N₂-吸附、SEM、TEM、FT-IR和Py-FTIR等手段进行表征,结果表明,前驱体溶胶的晶化时间对ZSM-5/MCM-48复合分子筛的结构和表面酸性产生重要的影响,而特定结构的复合分子筛基催化剂可以显著改变甲醇制汽油（MTG）反应的产物分布,与ZSM-5基催化剂相比显著降低了油品中芳烃和均四甲苯的含量。阐明了其催化作用机制是由于介孔结构的MCM-48对微孔结构的ZSM-5界面或表面的修饰作用。     

The synthesis of MCM-41 nanomaterial from Algerian Bentonite: The effect of the mineral phase contents of clay on the structure properties of MCM-41

This study focuses on the MCM-41 material (Mobil Composition of Matter). The MCM-41 nanomaterial presents higher physical properties such as pore sizes, surface areas and pore volumes. This material is usually synthesized by using laboratory reagents as silicate sources and aluminium source. These laboratory reagents are still expensive and toxic for large scale production. The main aim of this work is to resolve this problem and to replace these expensive laboratory reagents by more cost effective ones. The volclay and Algerian bentonite low-cost mass clay materials are used as silicate and acuminate sources separately by adopting an alkaline fusion process to extract both silicon and aluminium (1 kg of silicium and aluminium from volclay and Algerian bentonite cost around 0.03 and 0.01 € whereas the same amount of silicon from ludox and aluminium from sodium aluminates cost around 350 €). The synthesis of MCM-41 from bentonite was carried out by the hydrothermal method using the supernatants of bentonite (in the form of sodium silicate and sodium aluminate). On the basis of the data obtained from powder X-ray diffraction (XRD), transmission electron microscopy (TEM) and N₂ adsorption and desorption, the results revealed that the properties of MCM-41 synthesized from Algerian bentonite and volclay separately depend on both elemental composition and mineral phase contents of the used bentonite. Pure and highly ordered hexagonal mesoporous MCM-41 with uniform pore sizes and a high specific surface area have been successfully synthesized without any phases which exist in natural bentonite. The Algerian bentonite was chosen because of its low cost compared to volclay, another commercial clay source.     

Complex turing patterns in non-linearly coupled systems

Recently pattern formation in layered structures, showing complicated superimposed patterns, has been modeled by coupling two Turing systems linearly, i.e., passively, such that the characteristic length scales of the independent systems are well separated. Here we propose a model of two non-linearly coupled Turing systems to study pattern formation in layered membrane-like structures, where the coupling plays an active role and changes the kinetics of the uncoupled systems. Extensive numerical simulations show that non-linear coupling generates a number of new regular patterns different from the ones observed earlier with linearly coupled systems. Some of them turn out to be superimposed patterns with different length scales, but many are not. Also, contrary to the linear coupling case, the strength of the non-linear coupling is found to play an important role in the formation and selection of patterns.     

介孔分子筛MCM-41固载多氮杂环席夫碱与醋酸钴共同催化的Henry反应

采用2-苯基-2氢-1,2,3-三唑-4-醛固载改性的MCM-41与醋酸钴共同催化的Henry反应。通过傅里叶变换红外光谱(FT-IR)和X射线多晶衍射(XRD)等技术手段对催化剂进行了表征。在室温下考察了金属盐、溶剂对反应的影响,催化剂循环使用3次后催化活性基本无变化(产率可达80.5%)。     

基于MCM-41硬模板的镍铁磁性纳米管的合成及其磁性研究

以Si-MCM-41为硬模板,利用介孔材料的吸附作用,将Fe3+和Ni 2+按一定比例定量吸附组装到介孔材料的孔壁上;然后通过程序升温在900℃条件下高温焙烧,并经氢氟酸处理,得到直径大约为3.0nm的中空铁氧体纳米管.分别利用傅立叶变换红外光谱仪、扫描电镜、透射电镜、X射线衍射仪分析了合成材料的结构、组成、形貌;采用振动样品磁强计测定了其磁性能.结果表明,合成的镍铁氧体纳米管具有良好的管状形貌,其结构与分子筛MCM-41的结构相似,并具有良好的磁学性能.这说明MCM-41分子筛孔道结构具有可复制性,本研究可望为制备具有适当长径比的一维纳米磁性材料打下良好基础.     

Determination of personal care products in water using UHPLC–MS after solid phase extraction with mesoporous silica‐based MCM‐41 functionalized with cyanopropyl groups

A silica‐based MCM‐41 mesoporous material functionalized with cyanopropyl groups has been synthesized by cocondensation, characterized and applied to preconcentrate six parabens and three UV filters in river and swimming‐pool waters. The analytes were quantified by ultra‐high performance liquid chromatography‐tandem mass spectrometry, according to the Directive 96/23/EC. Even though matrix effect was negligible, quantification in river water samples with the standard addition approach improved the recoveries obtained using solvent‐based and even with matrix‐matched calibration. The method quantification limits in river water samples were 0.05 ng/mL for 2,4‐dihydroxybenzophenone and 0.01 ng/mL for the rest. Recoveries, evaluated for a concentration level of 0.5 ng/L, were in the range 93.5‐107.6% for parabens and in the range 64.2‐85.8% for UV filters, with relative standard deviations intraday ≤10.2 and 10.8%, respectively. This parameter, evaluated for a concentration level of 0.1 ng/L, ranged between 98.3 and 110.4% for parabens and between 61.9 and 89.9% for UV filters, with relative standard deviation intraday ≤15.3 and 15.5%, respectively. The two UV filters with lower recoveries were the most affected by the addition of sodium chloride. River and swimming pool waters were analyzed and all the personal care products were found in the swimming pool water, whereas only methylparaben was detected in the river water.     

用水热法在铁铬铝合金片上原位合成MCM-22沸石膜

 采用水热法在铁铬铝合金片载体上原位合成了MCM-22沸石膜,并采用X射线衍射和扫描电子显微镜对沸石膜进行了表征,探讨了成膜的影响因素. 结果表明,载体预处理条件对合成沸石膜的品质有较大的影响. 载体仅经碱处理后合成的沸石膜稀疏而不连续; 载体先经碱处理再经酸处理后可得到连续致密的沸石膜,且晶片取向均一; 载体预先涂覆Al2O3胶过渡层后制得的MCM-22沸石膜经超声波清洗后不会脱落,表明沸石膜与载体间的结合力增强. 此外,增大晶化母液量有利于沸石膜的生长.     

MCM-41负载的La,Ce和Pt催化剂上三氯乙烯的低温催化燃烧

 分别采用直接水热合成法和浸渍法制备了Si-MCM-41, La-Si-MCM-41和Ce-Si-MCM-41介孔材料及其负载的Pt催化剂. 小角X射线衍射、氮气吸附和扩展X射线精细结构分析表明, La和Ce元素进入了MCM-41分子筛的骨架结构. NH3程序升温脱附测试未检测到含La和Ce样品表面的酸性. 所制备的催化剂具有较高的三氯乙烯催化燃烧活性及生成CO2和HCl的选择性.     

Ce-MCM-48立方介孔分子筛结构的光谱表征

在碱性条件下,以混合模板剂pH调节水热合成了掺入铈的介孔分子筛Ce-MCM-48,并采用XRD,DRUV-Vis(紫外-可见漫反射),FTIR,XRF结合BET等测试手段对样品进行表征。实验结果表明,采用本方法所合成的掺铈介孔材料仍保持立方介孔的有序结构,同时适量的铈的掺入和pH调节使分子筛的有序性及吸附性能得到改善,晶胞参数增大,孔径更均一,孔壁增厚。从而可推出Ce-MCM-48的热稳定性、水热稳定性、催化活性及择形选择性可得到提高。掺入的铈以四配位状态高度分散在介孔的有序结构当中。红外光谱表明不同量的铈的掺入对骨架硅的各种振动扰动程度不同。     

Mo/MCM-22分子筛碳化钼活性中心结构及甲烷活化机理的密度泛函理论研究

 应用密度泛函理论研究了Mo/MCM-22分子筛上碳化钼活性中心的几何结构和电子结构,以及甲烷在该活性中心上的活化机理. 设计了两种结构的活性中心模型: Mo(CH2)2(模型A)和Mo(CH)CH2(模型B); 它们都嫁接在MCM-22分子筛超笼边缘的T4位的Brnsted-酸性位上,用3T簇模型代替分子筛的骨架,对所设计的模型进行了几何结构优化和电子结构分析. 结构优化结果显示, Mo与CH2端基以双键结合,键长为0.18～0.19 nm, 而Mo与CH端基以叁键结合,键长为0.17 nm. 通过自然键轨道分析,证明中心钼原子以配位键与骨架氧原子结合. 根据前线分子轨道的分析,预测了甲烷活化反应将发生在甲烷分子的HOMO和钼活性中心的LUMO之间,即 C-H 键的电子流向 Mo-C 键的π*轨道. 甲烷 C-H 键发生异裂, H+和H3C-基团分别与 Mo-C 键上的Mo和C成键. 在模型A上,甲烷活化反应的活化能为119.97 kJ/mol; 在模型B上,甲烷的H原子可以分别结合到CH2端基和CH端基上,对应的活化能分别为91.37和79.07 kJ/mol.