Influence of Ga/(Ga + In) grading on deep‐defect states of Cu(In,Ga)Se2 solar cells

The benefits of gallium (Ga) grading on Cu(In,Ga)Se₂ (CIGS) solar cell performance are demonstrated by comparing with ungraded CIGS cells. Using drive‐level capacitance profiling (DLCP) and admittance spectroscopy (AS) analyses, we show the influence of Ga grading on the spatial variation of deep defects, free‐carrier densities in the CIGS absorber, and their impact on the cell's open‐circuit voltage V_oc. The parameter most constraining the cell's V_oc is found to be the deep‐defect density close to the space charge region (SCR). In ungraded devices, high deep‐defect concentrations (4.2 × 10¹⁶cm^–3) were observed near the SCR, offering a source for Shockley–Read–Hall recombination, reducing the cell's V_oc. In graded devices, the deep‐defect densities near the SCR decreased by one order of magnitude (2.5 × 10¹⁵ cm^–3) for back surface graded devices, and almost two orders of magnitude (8.6 × 10¹⁴ cm^–3) for double surface graded devices, enhancing the cell's V_oc. In compositionally graded devices, the free‐carrier density in the absorber's bulk decreased in tandem with the ratio of gallium to gallium plus indium ratio GGI = Ga/(Ga + In), increasing the activation energy, hindering the ionization of the defect states at room temperature and enhancing their role as recombination centers within the energy band. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Nanotextured multicrystalline Al‐BSF solar cells reaching 18% conversion efficiency using industrially viable solar cell processes

We report recent achievements in adapting industrially used solar cell processes on nanotextured surfaces. Nanostructures were etched into c‐Si surfaces by dry exothermic plasma‐less reaction of F species with Si in atmospheric pressure conditions and then modified using a short post‐etching process. Nanotextured multicrystalline wafers are used to prepare Al‐BSF solar cells using industrially feasible solar cell proc‐ essing steps. In comparison to the reference acidic textured solar cells, the nanostructured cells showed gain in short circuit current (J_sc) of up to 0.8 mA/cm² and absolute gain in conversion efficiency of up to 0.3%. The best nanotextured solar cell was independently certified to reach the conversion efficiency of 18.0%. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

DMFC两相流及其对传质影响的研究

采用自制的实验系统对液态进料直接甲醇燃料电池(DMFC)阳极交叉指状流道内的两相况功特性进行了可视化实验研究.自制的DMFC单电池带有透明窗口,采用镀金的不锈钢阴极极板和透明的聚碳酸脂阳极流场板,电解质为Nafion117膜.实验过程中燃料电池的进口总管和出口总管是水平的,进口流道和出口流道是竖直的.实验发现,出口流道中典型的两相流流型是泡状流、而出口总管中的典型流型是弹状流.进口流道中的气弹和气柱导致了阳极传质恶化.     

Magnetism of Fe,Co, and Ni nanowires encapsulated in carbon nanotubes

We have investigated the electronic and magnetic properties of Fe, Co, and Ni nanowires encapsulated in carbon nanotubes (CNTs) using spin polarized ab initio calculation. The incorporated systems with hollow region between the nanowire and the C shell have the enhanced magnetic moments compared to the ferromagnetic nanowires tightly wrapped by CNTs. The Co nanowire encapsulated in CNTs is a strong ferromagnet and has high spin polarization regardless of the distance between the nanowire and the C shell. The results show that the Co-filled CNTs are useful for spin polarized transport nanodevice.     

自动显微图像处理系统的研制

为实现病理切片的自动检测研制了一套显微图像处理系统。该系统由三目照相生物显微镜、ＣＣＤ摄像机和带图像处理卡的个人计算机组成。本文介绍显微镜的自动调焦、自动搜索及状态分析判断等系统驱动功能的原理和设计，最后给出该系统临床应用的部分结果     

钒(Ⅴ)-7-碘-8-羟基喹啉-5-磺酸显色体系测定钢样中的钒

研究了7-碘-8-羟基喹啉-5-磺酸（H2QSI）在乙醇存在下分光光度法测定钡（Ⅴ）的最佳条件。在乙醇存在下pH4的硫酸介质中,（H2QSI）与V（Ⅴ）形成了红棕色配合物,最大吸收位于506nm处,表观摩尔吸光系数εmax＝2.9×103L·mol-1·cm-1,有色配合物组成为V（Ⅴ）:（H2QSI）＝1:3。钒（Ⅴ）在0-14μg／25mL符合比耳定律、本法用于钢样中的测定,结果满意。H2QSI是光度分析中的一种显色剂,近年来,8-羟基喹啉类试剂用于钒（Ⅴ）的测定已有报道[1]:,H2QSI曾见用于稀土元素的光度测定[2],但用于钒（Ⅴ）的测定尚未见报道。本文研究了V（Ⅴ）与H2QSI的显色反应条件及组成,在pH4的乙醇介质中,V（Ⅴ）与H2QSI生成红棕色配合物ε506nm＝2.9×103L·mol-1·cm-1。本方法用于低碳合金钢中钒的测定,结果满意。     

High-power continuous-wave operation of a diode-pumped laser at

The continuous-wave laser properties of an efficient diode-pumped Nd:GdVO₄ crystal operating at formed with a simple plane-concave cavity have been studied. With the incident pump power of 21 W, an output power of 6.9 W was obtained, giving an optical conversion efficiency of 32.8% and a slope efficiency of 35.3%. The laser characterization of two different Nd³⁺-doped concentration of Nd:GdVO₄ crystals were studied.     

The K<Superscript>-</Superscript>α scattering length and the reaction dd↦αK<Superscript>+</Superscript>K<Superscript>-</Superscript>

We present predictions for the K^-α scattering length obtained within the framework of the multiple-scattering approach. Evaluating the pole position of the K^-α scattering amplitude within the zero-range approximation, we find a loosely bound K^-α state with a binding energy of E_R = - 2,..., - 7 MeV and a width Γ_R = 11,..., 18 MeV. We propose to measure the K^-α scattering length through the final-state interaction between the α and K^--meson produced in the reaction dd↦αK⁺K^-. It is found that the K^-α invariant-mass distribution from this reaction at energies near the threshold provides a new tool to determine the s-wave K^-α scattering length.     

表面活性剂增敏光度法测定锌

在弱酸性(pH=4.5)介质中,非离子表面活性剂Tween-80存在下,7-(苯并噻唑-2-偶氮)-8-羟基喹啉-5-磺酸(BTAQS)与锌形成2:1的紫色配合物,最大吸收波长位于580nm处,表观摩尔吸光系数为7.4×104L·mol-1·cm-1,锌含量在0-6μg/25mL范围内符合比耳定律。测定矿样中的锌,结果满意。