Changes in surface composition of Fe-Si-Cr-K oxide alkylation catalyst: the marked role of potassium ferrites

The influence of gas-phase methylation of phenol on the state of the Fe-Si-Cr-K oxide catalyst surface was investigated by thermodesorption of K atoms and ions. Changes in potassium desorption energies, as determined from Arrhenius-like plots, varied from 3.07 eV to 1.21 eV for the atoms and from 2.59 eV to 2.89 eV for ion desorption from the active and deactivated samples, respectively. The results were discussed in terms of transformation of the catalyst surface and formation of β-ferrite.     

芳并呋喃类化合物的一锅化合成法

本文报道用KF/Al~2O~3作为碱催化剂，由水杨醛或2-羟基-1-萘醛分别和α-溴代乙酸酯、α-溴代苯乙酮、苄基氯、4,4'-二氯甲基联苯和1,5-二氯甲基萘等进行一锅化缩合反应，以38～89%的产率合成了14种芳并呋喃化合物。     

液相沉积法制备光催化活性TiO2薄膜和纳米粉体

采用液相沉积法，在35℃通过向六氟钛酸铵水溶液中添加硼酸和结晶诱导剂锐 铁矿型TiO2纳米晶，沉积出具有光催化活性的Ti02薄膜和纳米粉体．用XRD，AFM， 阶梯仪,UV-vis，BET法对Ti02薄膜和粉体的沉积条件、结构、厚度和性能进行了测 定和表征，并用亚甲兰的降解，评价了TiO2薄膜和纳米粉体的光催化活性．结果表 明，当反应物六氟钛酸铵与硼酸的摩尔比为1：2—1：4时，沉积的粉体和薄膜含有 锐钛矿相Ti02；经300℃热处理的Ti02薄膜和纳米粉体具有最高的光催化活性，它 的光催化活性是未经热处理前的5倍．本文还解释了经300℃热处理的薄膜和纳米粉 体具有最高光催化活性的原因．     

CuO-Ag2O/γ-Al2O3催化剂的TPR特性及氧化活性研究

采用程序升温还原技术(TPR)研究CuO-Ag2O/γ-Al2O3双组分及其单组分催化剂的还原特性以及热处理温度对其还原性能的影响。发现不同负载量的Cuo-Ag2O/γ-Al2O3催化剂的还原特性有明显差异, 反映出催化剂表面存在着不同种类的铜物种。Ag2O的存在, 使催化剂的TPR峰位与单组分CuO/γ-Al2O3的TPR曲线产生明显差异, 还原峰发生位移, 随Ag2O添加量的增加, 位移增大。对苯的完全氧化反应结果表明, 催化剂的氧化活性次序为:CuO-Ag2O/γ-Al2O3>CuO/γ-Al2O3>Ag2O/γ-Al2O3。热处理温度升高, 使催化剂表面铜物种分散状态及其还原性能发生变化。从500~900℃, 存在一个使铜物种达到最佳分散态的温度。讨论了负载于γ-Al2O3载体上的CuO-Ag2O双组分及其单组分催化剂在还原过程中金属与载体, 金属与金属间的相互作用以及热处理温度对其还原性能的影响。     

杂多阴离子的相转移化学 Ⅰ.取代的Keggin及Dawson结构杂多阴离子在非极性溶剂中的溶剂化行为研究

利用四庚基溴化铵将Keggin结构的杂多阴离子ZW~1~1O~3~9M(H~2O)^n^-(Z=Si,Ge,P,M=Ni^2^+,Cu^2^+,Cr^3^+,Co^2^+,n=4～6)和Dawson结构的杂多阴离子P~2W~1~7O~6~1M(H~2O)^n^-(M=Ni^2^+,Cu^2^+,Cr^3^+,Co^2^+,n=7,8) 从水溶液中转移至非极性溶剂(苯或甲苯)中,并观察到在水溶液中难以进行的配位水的脱去反应,形成配位不饱和的杂多阴离子.当加入Lewis碱如丙酮,吡啶等,可迅速恢复饱和配位,其电子吸收光谱也相应变化,基本恢复到配位饱和时的数值,有ESR信号.实验表明,在非极性溶剂中,配体之间相互进行的取代反应,吡啶的配位能力最强, 发生了取代反应ZW~1~1O~3~9M(L)^n^-+Py→ZW~1~1O~3~9M(Py)^n^-+L(L=丙酮,乙腈等).同时我们也研究了温度,杂多阴离子浓度,惰性气体流量对杂多阴离子在非极性溶剂中的溶剂化行为的影响,得到了相转移的一般规律,为杂多阴离子在非极性溶剂中的催化研究提供了理论依据     

磁铅石型复合氧化物LaNi_xCo_(1-x)Al_(11)O_(19+δ)催化剂上CH_4和CO_2重整反应的研究

考察了磁铅石型复合氧化物LaNi_(0.5)M_(0.5)Al_(11)O_(19 + δ) (M = Co, Fe, Mn, Cu)和LaNi_xCo_(1-x)Al_(11)O_(19+δ)催化剂在CH_4与CO_2重整制合成 气反应中的催化活性，并应用XRD，TPR，UV-DRS技术着重表征LaNi_xCo_(1-x)Al_ (11)O_(19+δ)催化剂的结构和性能。研究结果表明该系列催化剂具有相同的晶体 结构和相似的还原稳定性。对不同过渡金属取代的催化剂来说，以LaNi_(0.5)Co_ (0.5)Al_(11)O_(19+δ)催化剂具有最好的反应活性。而对于LaNi_xCo_(1-x)Al_ (11)O_(19+δ)系列催化剂，当x ≤ 0.375时，随x值的增大，催化活性明显提高， 但在0.375 ≤ x ≤ 1.0范围内，催化活性几乎保持不变。由此得到结论，对于此 反应来说，控制Ni量在0.375 ≤ x ≤ 0.50范围内比较合适。     

巯基乙酸锑(Ⅲ)配合物合成与晶体结构

以三氧化二锑和巯基乙酸在水溶液中反应合成了配合物HSb(SCH2COO)2,并通过元素分析、红外光谱、X射线粉末衍射进行了表征,利用单晶X射线四圆衍射法测定了晶体结构,结果表明该配合物晶体属于单斜晶系,C2/c空间群,晶胞参数为:a=1.40005(8)nm,b=1.19121(8)nm,c=1.23588(8)nm,β=126.822(1)°,V=1.6499(2)nm^3,Dc=2.439g·cm^-3,Z=8,R1=0.0250。并对X射线粉末衍射数据进行了指标化,其结果与单晶数据吻合。     

Effect of promoters on the behavior and properties of VPO catalysts for the selective oxidation of n-butane to maleic anhydride

A series of vanadyl pyrophosphate (VPO) modified by several additives has been investigated with the aim to reveal the promotion mechanism of the additives for selective conversion of n-butane to maleic anhydride (MA). Catalyst performance and various physicochemical characterization including XPS, XRD, FT-IR, DTA and BET indicated that the properties of additives, such as electronegativity and ion radius, contributed much to the effect of the additives on the structure and surface characteristics of VPO catalysts, and then influenced the catalytic behavior. The remarkable effects of additives on the surface vanadium and oxygen species were discussed. It was shown that maximum MA selectivity could be found with a moderate V⁵⁺ /V⁴⁺ ratio, and the catalytic activity and selectivity were improved, respectively, with the increase of surface active oxygen species, as well as as their amount and stability.     

Use of flow microcalorimetry and dynamic mechanical thermal analysis for probing interphase structure in poly(styrene-b-butadiene-b-styrene)/magnesium hydroxide composites

Interactions between magnesium hydroxide (Mg(OH)₂ particles (both untreated and treated with 16-methyl heptadecanoic acid (isostearic acid)) and low molar mass poly(styrene) (PS) and poly(butadiene) (PB) have been studied by flow microcalorimetry (FMC) and have been related to the interphase structure in poly(styrene-b-butadiene-b-styrene) (SBS)/Mg(OH)₂ composites using dynamic mechanical thermal analysis (DMTA). The FMC studies revealed that both polymers adsorbed strongly onto an untreated magnesium hydroxide surface though the PB showed greater irreversible adsorption from the heptane carrier fluid. Diffuse reflectance Fourier transform infrared spectroscopy (DRIFTS) studies on filler samples removed from the FMC cell after the adsorption-desorption cycle confirmed strong polymer filler interaction. Adsorption of the low molar mass samples of PS and PB onto a pre-adsorbed monolayer of isostearic acid on Mg(OH)₂ resulted in a very significant reduction in polymer adsorption activity due to blockage of adsorption sites. DMTA studies revealed that strong adsorption of PS and PB blocks of SBS onto untreated filler in composites containing 60% w/w Mg(OH)₂ gave rise to phase mixing that led to an 18 °C reduction in the T _g of the PS phase relative to that in the unfilled matrix. However, in equivalent composites based on isostearic acid treated filler a smaller reduction (10 °C) was observed, therefore reflecting reduced filler-matrix interaction and reduced phase mixing.     

在液-固色谱中溶剂强度与流动相中活性组分的关系

本文以液-固色谱中溶质计量置换保留模型为基础, 研究了二元体系溶剂强度与流动相中活性组分浓度之间的定量关系, 用80多组数据检验了这种关系的可靠性, 该模式的建立为液-固色谱中有效地选择洗脱体系及确定流动相中不同溶剂的比例, 提供了可靠的依据。