Electropolymerized Pyrrole‐Substituted Manganese Phthalocyanine Films for the Electroassisted Biomimetic Catalytic Reduction of Molecular Oxygen

We report for the first time on the electroassisted biomimetic activation of molecular oxygen by a newly prepared electropolymerized polypyrrole‐manganese phthalocyanine film. The prepared films and their intervention in the electroassisted catalytic reduction of molecular oxygen were analyzed by cyclic voltammetry and UV‐visible spectrophotometry on optically transparent electrodes. The obtained results demonstrate the probable existence of the key‐steps responsible for the suggested formation of the highly reactive manganese oxo intermediate.     

Preparation and Characteristics of Porous Silica Films by a Modified Base-Catalyzed Sol-Gel Process Containing PVA: II. Film Preparation

Porous SiO₂ films were successfully deposited on silicon substrates by a modified base-catalyzed Sol-Gel process (MBCP) containing polyvinyl alcohol (PVA). The process conditions, such as the gelation time, the synthesis temperature, the stabilizing agent of the precursor solution and the spin coating speed, the heat-treatment, the annealing temperature of the film on the microstructure and porosity of porous SiO₂ films were systematically investigated by SEM, XRD and ellipsometry techniques. This study provides a novel preparation technique for the porous SiO₂ film. Using this process, the resultant film can reach a thickness of 3.6 m for one layer, a porosity of 25–50%, a low thermal conductivity of 0.11 W/m·K. This film will be used as a low dielectric layer, an thermal-insulating layer and a low refractive index layer.     

Effect of substituents (NH_2,OH,F) on structures and stability of lithofluorosilylenoids

Ｓｉｌｙｌｅｎｅｉｓｔｈｅｓｉｍｉｌａｒｉｔｙｏｆｓｉｌｉｃｏｎｔｏｃａｒｂｅｎｅ,ａｎｄ,ｌｉｋｅｃａｒｂｅｎｅｉｎｏｒｇａｎｉｃｒｅａｃｔｉｏｎｓ,ｉｔｐｌａｙｓａｖｅｒｙｉｍｐｏｒｔａｎｔｒｏｌｅｉｎｏｒｇａｎｏｓｉｌｉｃｏｎｒｅａｃｔｉｏｎｓ.Ｉｎｒｅｃｅｎｔｙｅａｒｓ,ｔｈｅｒｅｈａｖｅｂｅｅｎｍａｎｙｒｅｐｏｒｔｓｏｎｓｉｌｙｌｅｎｅｓｉｎｑｕａｎｔｕｍｃｈｅｍｉｃａｌｒｅｓｅａｒｃｈｅｓ[1—3].Ｉｎｖｅｓｔｉｇａｔｉｏｎｏｎｉｔｓｏｒｇａｎｉｃｒｅａｃｔｉｏｎｓｈｏｗｓｔｈａｔｒｅａｌｉ…     

Surfactant in the gaseous phase II. Influence on stability of foams and thin liquid films

The influence of the vapors ofn-amyl orn-decyl alcohol on the stability of single thin liquid films, single bubbles, and foam columns was determined. It was found that the presence of surfactant vapors lowered the stability of foams and single foam films. The mechanism of the destabilizing action of the surfactant vapors on wet, dynamic foams under dynamic conditions is discussed. It is shown that the destabilizing action of the surfactant vapors is a further indication that surface elasticity forces are the main factor determining stability of wet, dynamic foams.     

Curing of a maleimide model compound

A monofunctional maleimide-ended model compound was synthesized and purified. The thermal curing of this compound was followed by size exclusion chromatography and the molecular masses of the oligomers formed during the curing reaction were determined by mass spectroscopy. It was found that high molecular mass species were not thermally stable. At high temperature and after enough time, a strong decrease in the polydispersity of the oligomers and a significantly preferential formation of trimer were observed. From ¹³C-NMR characterization, a five membered ring structure was found for the trimer, which explains the thermal stability of this species. © 1995 John Wiley & Sons, Inc.     

Sol-Gel Synthesis of Humidity-Sensitive P2O5-SiO2 Amorphous Films

The sol-gel synthesis of silicophosphate gels using phosphoryl chloride and tetraethoxysilane as molecular precursors is reported and discussed. Gel-derived glasses and films having the molar compositions 10P₂O₅ · 90SiO₂ and 30P₂O₅ · 70SiO₂ have been obtained. The structure of the dried gels as well as the structural modifications that occurs during the transformations in gel-derived glasses are analyzed by Fourier transform infrared spectroscopy (FTIR). It has been found that the evidence of the P—O—Si linkages begins to appear only on the FTIR spectra of the bulk gels heat treated up to 400°C while they are well resolved on the FTIR spectra of the bulk gel samples heated up to 1000°C indicating that at this temperature the transformation in the corresponding gel-derived glasses occurs. The humidity sensitive properties of the gel-films have been evaluated by electrochemical impedance spectroscopy (EIS). The phosphorous content as well as the temperature of the heat treatments strongly affect the sensitivity to RH of the gel-derived films.     

The Studies of the Heterogeneous Properties of Solid Surfaces by Means of the Derivatograph Q-1500 D

A simple method has been adopted to obtain an important information on the heterogeneous properties of materials studied, adsorbed liquid films and liquid-solid interactions. The method utilizes Q-TG mass loss and the first derivative Q-DTG mass loss curves with respect to temperature and time obtained during programmed liquid thermodesorption in quasi-isothermal conditions. The values of the adsorption capacity, total porosity of material, the value of active centers, desorption energy distribution and mesopore-size distribution functions obtained by this method are in good agreement with those estimated on the basis of independent methods. The theoretical and experimental results provided novel and unique data on the heterogeneity of solid surfaces, properties of liquid adsorbed films and thermal stability of the liquid/solid interfaces. This paper presents the more important results obtained so far in the studies the liquid/solid systems by means of the Paulik's classical and quasi-isothermal techniques. This revised version was published online in July 2006 with corrections to the Cover Date.     

A Note on ＂Global Exponential Convergence Analysis of Hopfield Neural Networks with Continuously Distributed Delays＂

In this note, we would like to point out that （i） of Corollary 1 given by Zhang et al. （cf Commun. Theor. Phys. 39 （2003） 381） is incorrect in general.     

Simultaneous Estimation of Escitalopram and Clonazepam in Tablet Dosage Forms Using HPLC-DAD Method and Optimization of Chromatographic Conditions by Box-Behnken Design

The study aimed to develop a new reverse-phase high-performance liquid chromatography (RP-HPLC) method with diode array detection (DAD) detection for simultaneous estimation of escitalopram (EST) and clonazepam (CZP) in tablet dosage forms with a quality by design (QbD) approach. The chromatographic conditions were optimized by Box-Behnken design (BBD) and developed method was validated for the linearity, system suitability, accuracy, precision, robustness, sensitivity, and solution stability according to International Council for Harmonization (ICH) guidelines. EST and CZP standard drugs peaks were separated at retention times of 2.668 and 5.046 min by C-18 column with dimension of 4.6 × 100 mm length and particle size packing 2.5 µm. The mobile phase was methanol: 0.1% orthophosphoric acid (OPA) (25:75, v/v), with a flow rate of 0.7 mL/min at temperature of 26 °C. The sample volume injected was 20 µL and peaks were detected at 239 nm. Using the standard calibration curve, the % assay of marketed tablet was founded 98.89 and 98.76 for EST and CZP, respectively. The proposed RP-HPLC method was able to detect EST and CZP in the presence of their degradation products, indicating the stability-indicating property of the developed RP-HPLC method. The validation parameter’s results in terms of linearity, system suitability, accuracy, precision, robustness, sensitivity, and solution stability were in an acceptable range as per the ICH guidelines. The newly developed RP-HPLC method with QbD application is simple, accurate, time-saving, and economic.     

Synthesis and Systematic Study on the Effect of Different PEG Units on Stability of PEGylated,Integrin-αvβ6-Specific A20FMDV2 Analogues in Rat Serum and Human Plasma

A20FMDV2 is a 20-mer peptide that exhibits high selectivity and affinity for the tumour-related αvβ6 integrin that can compete with extracellular ligands for the crucial RGD binding site, playing a role as a promising αvβ6-specific inhibitor for anti-cancer therapies. Unfortunately, the clinical value of A20FMDV2 is limited by its poor half-life in blood caused by rapid renal excretion and its reported high susceptibility to serum proteases. The incorporation of poly (ethylene glycol) chains, coined PEGylation, is a well-established approach to improve the pharmacokinetic properties of drug molecules. Here, we report a systematic study on the incorporation of a varying number of ethylene glycol units (1–20) into the A20FMDV2 peptide to establish the effects of PEGylation size on the peptide stability in both rat serum and human plasma. In addition, the effect of acetyl and propionyl PEGylation handles on peptide stability is also described. Selected peptide analogues were assessed for integrin-αvβ6-targeted binding, showing good specificity and activity in vitro. Stability studies in rat serum established that all of the PEGylated peptides displayed good stability, and an A20FMDV2 peptide containing twenty ethylene glycol units (PEG₂₀) was the most stable. Surprisingly, the stability testing in human plasma identified shorter PEGs (PEG₂ and PEG₅) as more resistant to degradation than longer PEGs, a trend which was also observed with affinity binding to integrin αvβ6.