Laterality index in functional MRI: methodological issues

In functional magnetic resonance imaging (fMRI), hemispheric dominance is generally indicated by a measure called the laterality index (LI). The assessment of a meaningful LI measure depends on several methodological factors that should be taken into account when interpreting LI values or comparing between subjects. Principally, these include the nature of the quantification of left and right hemispheres contributions, localisation of volumes of interest within each hemisphere, dependency on statistical threshold, thresholding LI values, choice of activation and baseline conditions and reproducibility of LI values. This review discusses such methodological factors and the different approaches that have been suggested to deal with them. Although these factors are common to a range of fMRI domains, they are discussed here in the context of fMRI of the language system.     

负折射率材料对产生Casimir排斥力的影响

研究了负折射率材料对产生Casimir排斥效应的影响. 两材料板间的Casimir排斥力的发生取决于两板以及其间媒质的电磁特性,通过理论与数值结果的分析研究给出电磁特性所影响排斥力的产生趋势. 对于由Drude-Lorentz型色散关系描述等效介电常数和磁导率的负折射率材料,调节各特征频率参数可实现Casimir排斥效应. 关键词： Casimir排斥力 负折射率材料 Drude-Lorentz型色散关系     

角度调谐滤光片特性分析及膜系设计

对窄带滤光片的倾斜入射特性作了分析.斜入射时其透射通带和峰值会向短波方向移动,透射曲线的稳定性跟滤光片的间隔层结构相关,多腔间使用相同的间隔层可以保证斜入射时有稳定的峰值透射率和带宽,利用该特点可以制备角度调谐窄带滤光片.透射光S和P偏振分量的中心波长随入射角度的增大出现分离现象,产生较大的偏振相关损耗.通过搭配不同厚度的高低折射率材料作为间隔层,改变其有效折射率,使其两个偏振分量的中心波长实现重合.设计了符合密集波分复用(Dense Wavelength Division Multiplexing,DWDM)系统要求的低偏振相关损耗四腔窄带角度调谐滤光片膜系,其可调谐范围达20 nm以上,并评估了所设计角度调谐滤光片的调谐性能.     

用分光光度法研究非晶硅薄膜的光学性质

提出了一种测量薄膜透射光谱的方法.该方法用自制的夹具改进了分光光度计,保证了在测量大小不同的样品时参考光的强度和入射到待测样品上光的强度相同.利用改进后的分光光度计测量了沉积在玻璃衬底上非晶硅薄膜的透射光谱,并对透射光谱进行了拟合和计算,确定出非晶硅薄膜的光学常量和厚度.     

基于PASCO系统的物质折射率测量

设计了基于全反射原理和PASCO系统的角度扫描物质折射率计算机测量方案.用波长650 nm的激光,测量了水和酒精的折射率,与公认的测量结果较为吻合.通过在透射方观察找到全反射现象,且因出射光线与入射光线的方向是在同一方位,所以透射方并无需转动.引入PASCO系统可测量得到总透射率随入射光角位置的变化关系曲线.     

Modifying the physicochemical properties,solubility and foaming capacity of milk proteins by ultrasound-assisted alkaline pH-shifting treatment

This study investigated the effects of different treatment of alkaline pH-shifting on milk protein concentrate (MPC), micellar casein concentrate (MCC) and whey protein isolate (WPI) assisted by the same ultrasound conditions, including changes in the physicochemical properties, solubility and foaming capacity. The solubility of milk proteins had a significant increase with gradual enhancement of ultrasound-assisted alkaline pH-shifting (p < 0.05), especially for MCC up to 99.50 %. Also, treatment made a significant decline in the particle size of MPC and MCC, as well as the turbidity of the proteins (p < 0.05). The foaming capacity of MPC, MCC, and WPI was all improved, especially at pH 11, and at this pH, the milk protein also showed the highest surface hydrophobicity. The best foaming capacity at pH 11 was the result of the combined effect of particle size, potential, protein conformation, solubility, and surface hydrophobicity. In conclusion, ultrasound-assisted pH-shifting treatment was found to be effective in improving the physicochemical properties and solubility and foaming capacity of milk proteins, especially MCC, with promising application prospect in food industry.     

Rate sensitivity and deformation mechanism of semi-crystalline polymers during instrumented indentation

Instrumented indentation tests using both constant loading rate (CLR) and continuous stiffness measurement (CSM) operation modes were performed to investigate the deformation mechanism and their sensitivity to the deformation rate in semi-crystalline polymers through the quantitative analysis of load-depth loading and unloading curves. The strain rate was constant during the CSM tests, while the strain rate decreased with the increasing of loading time in CLR tests. The mechanical response mechanism of the semi-crystalline polymers to these tests was very complicated because of the combined effects of strain-hardening in the crystal phase and strain-softening in the amorphous phase. Results show that the loading index m reflects the strain-hardening or strain-softening response during indentation. When m > 2, the mechanical response was due to the strain-hardening, and when m < 2, the response was due to strain-softening. A method based on the measured contact hardness was proposed to obtain the unloading stiffness, and the other mechanical parameters could then be determined according to the unloading stiffness.     

Selective Excitation of Band Extrema in Valley Photonic Crystals

Flexible control of building blocks of photonic crystals enables achieving desirable band structures. Exploration of photonic band extrema has brought many fantastic features to design artificial optical materials, such as Brillouin‐zone‐corner extrema for valley photonic materials and zone‐center extremum for zero‐index metamaterials. However, two such kinds of extrema are always found independently in different photonic crystals. In this work, a kind of valley photonic crystals possessing both zone‐center and zone‐corner band extrema almost at the same frequency is proposed. Inspired by antennas theory, a three‐antenna array (TAA) source is devoted to individually manipulate each extremum. The correlation coefficient is given to determine the coupling efficiency between the TAA source and extrema eigenmodes. By using a source with a high correlation coefficient, these extrema bulk states are selectively excited consistent with their eigenfields. Furthermore, three control cases are shown that multiple extrema points are simultaneously excited, in order to confirm the validity of the correlation coefficient. Finally, a potential application of a beam‐steering device is proposed through selective excitation of ternary extrema. This work develops binary valley states into ternary mix states, rendering more degrees of freedom for on‐chip optical information transport, particularly for beam steering and mode division multiplexing.     

消光式核壳二聚体传感器的设计与光谱特性分析

根据ITO/Au纳米核壳二聚体粒子在生物医学领域的应用合理性,设计了一种实时检测生物液体的核壳二聚体探针消光式传感器;由偶极子理论推导出输出波长与外界环境折射率关系;利用MATLAB设计ITO/Au纳米核壳二聚体粒子结构;采用软件DDSCAT7.3结合离散偶极近似法,利用二聚体有效半径模拟计算了300~950nm可见光到红外光波段不同核壳比、二聚体间距、以及不同介质折射率的消光光谱;根据传感芯片折射率与偶极共振、耦合八级共振的响应关系得出ITO/Au二聚体的折射率灵敏特性。与传统Ag/Au核壳纳米粒子相比,ITO/Au纳米核壳二聚体结构引入了可作为传感芯片灵敏性自参考参数的耦合八级共振峰,同时ITO/Au二聚体结构的折射率灵敏度可达到419nm/RIU。这些工作及其结果对制作消光式传感器具有重要的意义。