苯并三氮唑及其羧酸酯衍生物对铜缓蚀机理的分子动力学模拟研究

用分子动力学(MD)方法, 模拟计算了5种铜缓蚀剂[苯并三氮唑(BTA)、苯并三氮唑-5-羧酸甲酯(MBTC)、苯并三氮唑-5-羧酸丁酯(BBTC)、苯并三氮唑-5-羧酸己酯(HBTC)、苯并三氮唑-5-羧酸辛酯(OBTC)]与Cu₂O晶体的相互作用. 结果发现, 中性条件下缓蚀剂分子与Cu₂O晶体的结合能均大于酸性条件下的数值, 但两种条件下结合能的大小排序均为OBTC＞HBTC＞BBTC＞MBTC＞BTA. 对体系各种相互作用以及对关联函数g(r)的分析表明, 体系结合能主要由库仑作用提供, Cu₂O晶体中的Cu原子与缓蚀剂分子中的N原子之间形成了配位键. 在与Cu₂O(001)晶面结合过程中, BTA及其衍生物分子发生了扭曲变形, 但形变能远小于体系的非键相互作用能.     

Synthesis,crystal structure,spectroscopy, and magnetism of a mixed valence Co(III)–Co(II)–Co(III) complex stabilized by N-(2-hydroxybenzyl)salicylaldimine

Reaction of Co(OAc)₂ · 4H₂O with N-(2-hydroxybenzyl)salicylaldimine (H₂L_a) in dimethylformamide (DMF)–H₂O yields a linear trinuclear mixed valence complex [Co^III(μ-L_a)(μ-L_b)(μ-OAc)]₂Co^II · 2DMF (1). Here, HL_b is salicylaldimine, which is afforded by an in situ transformation of H₂L_a via cleavage of the C–N bond. Complex 1 has been characterized by X-ray crystallography as well as elemental analysis, UV-Vis, and IR spectroscopy. The cathodic and anodic responses of 1 in DMF appeared at ?1.46 V (Co^III → Co^II, quasi-irreversible) and +0.99 V (Co^II → Co^III, irreversible) versus saturated calomel electrode, respectively. The magnetic behavior of 1 has been analyzed by the one-ion approximation with spin–orbit coupling in O_h symmetry giving λ = ?121 cm^?1.     

Semicontinuity of the Approximate Solution Sets of Multivalued Quasiequilibrium Problems

We consider two kinds of approximate solutions and approximate solution sets to multivalued quasiequilibrium problems. Sufficient conditions for the lower semicontinuity, Hausdorff lower semicontinuity, upper semicontinuity, Hausdorff upper semicontinuity, and closedness of these approximate solution sets are established. Applications in approximate quasivariational inequalities, approximate fixed points, and approximate quasioptimization problems are provided.     

Infrared spectroscopy of closed s-shell gas-phase M+(N2O)n (M = Li,Al) ion-molecule complexes*

ABSTRACT

We present the results of a combined experimental and computational study of the structures of gas-phase M⁺(N₂O)_n (M?=?Li, Al) complexes. Infrared spectra were recorded in the region of the N₂O asymmetric (N?=?N) stretch using photodissociation spectroscopy employing the inert messenger technique. Unlike in our previous studies on M⁺(N₂O)_n (M?=?Cu, Ag, Au and M?=?Co, Rh, Ir) complexes, N– and O–bound isomers in this case are near isoenergetic and are not distinguished spectroscopically at this resolution. In the case of Li⁺ complexes, there is, however, evidence for the presence of bound N₂ moieties, indicating the presence of inserted, OLi⁺N₂(N₂O)_n–type structures. The weak N₂ band lies to the blue of the signature of molecularly N– and O–bound ligands and is well–reproduced in the simulated spectra of energetically low-lying structures computed from density functional theory. No such inserted isomers are observed in the case of Al⁺(N₂O)_n complexes whose infrared spectra can be understood on the basis of molecularly-bound N₂O ligands. The differences in M⁺(N₂O)_n structures observed for these closed–shell, ns², metal centres relative to other metal cations are discussed in terms of the likely bonding motifs.     

Photocatalytic and antifouling properties of TiO2-based photocatalytic membranes

Photocatalysis has been extensively studied due to its potential ability to avoid the excessive use of chemical reagents and reduce the energy consumption by employing solar energy. Moreover, to alleviate the reduction in the membrane permeation selectivity, separation efficiency, and membrane service life caused by the emerging micro-pollutants and membrane fouling, membrane technology is often coupled with microbial, electrochemical, and catalytic processes. However, although physical/chemical cleaning and membrane module replacement can overcome the inherent limitations caused by membrane fouling and other membrane separation processes, high operating costs limit their practical applications. In this review, common preparation methods for TiO₂ photocatalytic membranes are described in detail, and the main approaches to enhancing their photocatalytic performance are discussed. More importantly, the mechanism of the TiO₂ photocatalytic membrane antifouling process is elucidated, and some applications of photocatalytic membranes in other areas are described. This review systematically outlines future research directions in the field of photocatalytic membrane modification, including metal and non-metal doping, fabrication of heterojunction structures, control over reaction conditions, increase in hydrophilicity, and increase in membrane porosity.     

MSINDO study of water adsorption on NiO surfaces

The dissociation of water adsorbed on the surface of NiO was investigated by using the semi-empirical SCF MO method MSINDO. Simulations were based on embedded cluster models representing the (100) surface, with and without a monatomic step. The angle formed between the metal adsorption site and the O–H bond associated with water has been found to be critical to the energetics of the dissociation process. Based on this criterion, it was shown that water dissociation is favorable on the stepped surface, but highly unlikely on the planar surface. In addition, the activation energy required for water dissociation in a monatomic NiO step was considerably lower than for dissociation at the planar surface. The high activation energy associated with water dissociation on the planar surface is attributed to the rigidity of the NiO lattice. Dedicated to Prof. K. Jug in honor of his 65th birthday     

Calorimetric approach to tetronic/water interactions

Tetronic^®comprises X-shaped copolymers formed by four poly(propylene oxide) (PPO) andpoly(ethylene oxide) (PEO) block chains bonded to an ethylene diamine centralgroup. Micellization behaviour of three representative Tetronics (T304, T904and T1307) was characterized to gain an insight into the interactions betweenthe copolymer unimers and the state of water in their solutions. The enthalpyof demicellization, recorded at 37°C in an isoperibol microcalorimeter,indicated that the process was in all cases exothermic and the enthalpy rankedin the order T1307≥T904>>T304. Micellization is entropy-driven owing tohydrophobic interactions between the PPO chains.DSC analysisshowed that the crystallization and melting peaks of the free water remainingin T304 and T904 solutions were progressively shifted toward lower temperaturesas the surfactant proportion increased, owing to a colligative effect. Boundwater corresponded to 3 water molecules per EO repeating unit. In the caseof T1307, which has longer PEO chains, a splitting of the melting peak wasobserved, one peak appearing around 0°C due to free water and anotherat –15°C due to interfacial water. As T1307 proportion raised, theenthalpy of the former decreased, whilst the enthalpy of the latter increased.In 40% T1307 solutions, interfacial water overcame the proportion of freewater; there being 1 interfacial and 3 bound water molecules per EO repeatingunit. Gaussian deconvolution of FTIR spectra also enabled to characterizethe evolution of free water as a function of Tetronic proportion. The dependenceof micellization and water interaction behaviour on Tetronics structure shouldbe taken into account to use these copolymers as drug solubilizers and micellarcarriers.     

半导体纳米复合材料的制备及其光电催化CO2还原

本实验通过模拟植物光合作用,设计制备了新颖的光电联合催化池3D-ZnO/Ni BiVO4/FTO,用电化学沉积法制备了泡沫镍负载的ZnO纳米棒光电阴极和BiVO4光电阳极,以0.1 mol·L^−1 KHCO3水溶液作为电解质,1 mmol·L^−1曙红Y为光敏剂,在−0.6 V硅太阳电池的电压下光电催化还原CO2得到了乙醇、乙酸和甲醇,总产率22.5μmol·L^−1·h^−1·cm^−2。实现了将太阳能贮存为化学能并减少了空气中的CO2,加深了学生对绿色化学和植物Calvin循环机理的理解。     

Nd2O3掺杂对SnO2气敏性质的影响

SnO_2是目前应用最广的一种气敏材料。我们曾经报道掺入La_2O_3,CeO_2,Pr_6O_(11),和Nd_2O_3后可使半导体元件的灵敏度提高,尤以对乙醇、乙醚、丙酮为显著。掺Nd_2O_3元件对乙炔的灵敏度也有提高。本文考察了SnO_2粒度和被测气氛的物化性质对掺Nd_2O_3元件灵敏度的影响。SnO_2采用水解SnCl_4法制备,纯度经光谱分析测定合格,试样用标准筛分目。在SnO_2中加1wt%Nd_2O_3(光谱纯)和适量水及甲基纤维素,混磨15分钟。将制成的悬浊液滴在一对铂     

有ITO透明导电膜的平面分层介质系统的电磁波性能理论研究

理论研究了有ITO(indium tin oxide)透明导电膜的多层平面分层介质系统的电磁性能，给出的理论曲线和实测曲线符合很好.多层平面分层介质系统的电磁性能与ITO膜(方块电阻为8Ω)所在界面位置和平面分层介质系统层数及各层厚度等有关.优化设计了一种含有ITO透明导电膜的厚度仅7.35mm的四层平面分层介质系统，其在8—18GHz频段内电磁波反射性能很好.作为多层平面分层系统中的ITO导电膜，其方块电阻应低于30Ω，并且越小，其反射性能越好. 关键词： 多层平面介质系统 电磁性能 ITO透明导电膜