微量元素示踪法在古代青铜器铜矿料来源研究中的应用

青铜模拟熔铸实验表明,利用ICP-AES法测定的青铜中亲铜元素的成分数据,通过聚类分析,可以较好地区分不同产地的铜矿料及其青铜产物。文章将这一方法具体应用于盘龙城商代遗址和鄂州出土青铜器的微量元素数据的分析,以考察其可行性和应用价值。多元统计分析结果显示：青铜模拟熔铸实验所得结论,亦可应用于盘龙城和鄂州青铜器铜矿料的区分,进一步验证了微量元素示踪古代青铜器铜矿料来源的可行性。     

基于微种群遗传算法和自适应BP算法的遥感图像分类

介绍了采用微种群遗传算法和自适应BP算法相结合的混合遗传算法来训练前向人工神经网络(BPNN)的方法。即先用微种群遗传学习算法进行全局训练,再用自适应BP算法进行精确训练,以达到加快网络收敛速度和避免陷入局部极小值的目的。将此算法用于遥感图像分类,网络的训练速度及分类结果表明,该算法收敛速度较快,预测精度较高。     

主动抛光盘面形测试技术的研究

主动抛光盘技术是新发展起来的一种能够根据需要将抛光盘面实时地主动变形成离轴非球面来磨制深非球度高精度天文镜面的磨制技术。简单介绍了抛光盘变形控制结构和面形检测机构，对深非球面度面形变形进行了精度分析，探讨了主动抛光盘的动态响应和校正，并对抛光盘的改造提出了一些建议。     

Milling of Organic Solids in a Jet Mill. Part 2: Checking the Validity of the Predicted Rate of Breakage Function

The particle size distribution of fine chemicals in the solid state, like active pharmaceutical ingredients, is often a critical parameter. To achieve the desired particle size distribution, milling of such materials is usually the method of choice. Since these chemicals are often scarcely available, experimental optimization of milling is not possible. Therefore, a model to predict the milling conditions has been developed. The model estimates the rate of breakage function, and needs mechanical properties like hardness and yield strength as input to calculate the rate of breakage function. This paper attempts to check the validity of the model by a series of experiments. A comparison of the experimental results with the outcomes of the model using five different model compounds has been performed. It appears that the rate of breakage function can be estimated by: The model is able to rank the compounds by degree of fracture as an effect of milling. It was also possible to perform a quantitative prediction of the impact of milling pressure on the milling behavior. Finally, it appeared that the prediction of the large particles in the distribution was significantly better than small ones. Because the oversized material is usually the most critical parameter, the conclusion is that the model has acceptable practical applicability.     

垂直悬挂质点弹簧系统的振动

讨论了振动的振幅与周期的变化规律,给出了当质点质量m0与弹簧质量m之比趋于零与趋于无穷大以及系统水平放置时的振动解.     

激光标线的原理和实验

根据几何光学知识分析了激光标线原理.理论和实验表明:激光标线长度与激光光束形状、光学元件形状及材料折射率有关.并讨论了激光标线向两侧扩展的原因.     

声速测量及声波的波动学规律研究

声速除了可利用共振干涉法和相位比较法测量外,还可以用干涉、衍射及“洛埃镜”反射等方法测量．声速实验的改进,不仅可扩展声速测量的方法,而且也可加深学生对波动学规律和本质的理解．     

160 GPa压力范围内重新标定的红宝石压标

 在同一理论框架内,基于冲击Hugoniot和热力学参数计算了Al、Cu、W、 Au、Pt、Ta、Ag、Mo、Ni、Co和Zn的300 K等温压缩线,并结合现有静高压实验数据,在160 GPa压力范围内重新标定了红宝石压标。所采用的两种红宝石压标形式的标定结果分别为A=1 923.4 GPa、B=9.75和m=1 889.0 GPa、n=5.48,两者具有非常好的自洽性,200 GPa压力范围内确定的压力偏差小于2.1 GPa。基于提出的红宝石压标,重新计算了3组Au等温压缩实验的加载压力。固定等温体模量为167 GPa,重算的实验数据拟合至Vinet物态方程所得等温体模量对压力的一阶偏导为5.95,与超声实验数据非常吻合。     

用扩散蒙特卡罗方法研究BH2, B(OH)2, BCl2和BCl的键离解能

采用扩散蒙特卡罗(DMC)方法计算了BH₂, B(OH)₂, BCl₂和BCl的HB-H和HOB-OH的键离解能, 同时也研究了轨道选择和Backflow变换对DMC计算结果的影响． 在Slater-Jastrow DMC(SJ-DMC)计算方法中,当采用B3PW91轨道时得到的HB-H和HOB-OH键离解能分别是359.1±0.12和98.2±0.12 kJ/mol;用B3LYP SJ-DMC计算键离解能得到了与用B3PW91 SJ-DMC方法类似的结果．通过BF-DMC(即在DMC中引入backflow修正)计算得到的HB?H键离解能为369.6±0.12 kJ/mol,也得到了更加接近实验值的HOB-OH键离解能为446.0±1.84 kJ/mol．由DMC的计算结果可以断定HB?H的键离解能的实验值为375.8 kJ/mol．另外还给出了BCl2和BCl的键离解能的计算结果.     

Effect of composition,thickness and temperature on non-linear I–V curves in vanadium phosphate glasses

Summary Glass layers of (V₂O₅)_1−x (P₂O₅) _x were prepared by melting appropriate mixtures of V₂O₅ and P₂O₅ powders. The measurements ofI–V characteristic curves show three regions of conduction, namely high-resistance state, turnover point with zero-differential resistance region (∂V/∂I=0) and differential negative-resistance region. The turnover point is strongly dependent on composition, sample thickness and temperature. It is found that the increase of the ratio of phosphorus/vanadium reduces conductance as well as it raises the field required to produce turnover behaviour. The data in the range up to the turnover point are discussed on the basis of an electrothermal process. Results of the negative-resistance state could be explained in terms of a hopping mechanism.