Komplexe von FeI2 und FeI3 mit Tetramethylharnstoff

Complexes of FeI₂ and FeI₃ with Tetramethylurea [FeI₂(OC(NMe₂)₂)₂] ( 1 , [Fe₂I₄(OC(NMe₂)₂)₂] ( 2 ), and [FeI₃(OC(NMe₂)₂] ( 3 ) were prepared by the reaction of FeI₂ and FeI₂/iodine, respectively, with tetramethylurea. The structures of 1 and 3 were determined from single crystal X-ray diffraction data. 1 crystallizes in the triclinic space group P1 , with a = 809.9(1), b = 923.2(1), c = 1 374.6(1) pm, α = 106.80(1), β = 90.47(1), γ = 101.55(1)°; Z = 2; R = 0.045., 3 : monoclinic, P2₁/c, a = 1 311.4(1), b = 783.3(1), c = 1 409.1(1) pm, β = 97.36(1)°; Z = 4; R = 0.047. 1 and 3 are isolated neutral complexes with distorted tetrahedral coordination of iron. 3 is the first FeI₃-complex with an O-donor ligand. The IR-spectra exhibit strong shifts of n?C = O and n?_asC—N of tetramethylurea especially on coordinating to FeI₃.     

无亲水基团取代的四苯基卟吩类LB膜的制备与表征

拉制了4种无亲水基团的四苯基卟吩LB膜,用透射电镜、荧光寿命、荧光光谱和紫外-可见光谱测量表征了膜的形貌和结构,发现膜中卟吩主要以聚集体形式存在。     

Synthesis and Crystal Structure of 2-Benzylsulefnyl-3-cyano-5,7-dimethyl-pyrazolo[1,5-a]pyrimidine

1 INTRODUCTION The pyrazolo[1,5-a]pyrimidines are the active compositions in many pesticides and medicines. A new class of KDR (tyrosine kinase VEGFR-2) ki- nase inhibitors is discovered and found to have affi- nity for the human CRF-1 (Corticotrophin re…     

Characterization and properties of the copper(II/I) complexes of macrocyclic hexathiaether ligand [21]aneS6

The copper(II/I) complexes of hexathiaether macrocyclic ligand, 1,4,8,11,15,18-hexathiacyclohenicosane ([21]aneS₆), were synthesized, and characterized by electrochemical and spectroscopic techniques. Cyclic voltammetric studies indicate that Cu([21]aneS₆)^2+/+ forms a reversible one-electron redox couple. The electrochemical potential obtained for Cu([21]aneS₆)^2+/+ (E^f = 0.89 V, against SHE) was found to be the highest potential reported to date for a Cu^2+/+ macrocyclic system in aqueous solution. By employing the Nernst equation, we can infer that the practical upper limit for formal potential of Cu(II/I)L systems maybe close to this high value. Stability constant data obtained for these complexes indicate that Cu([21]aneS₆)⁺is 12 orders of magnitude greater in stability than that of Cu([21]aneS₆)²⁺ indicating the favorable nature of this large macrocyclic ligand towards formation of Cu(I) complexes over Cu(II) complexes. Crystal structure of Cu([21]aneS₆)⁺ ( Fig. 2) shows that four sulfurs adjacent to one another are coordinated to Cu⁺ ion in this complex. Bond angles and distances calculated for the crystal indicate that it is a distorted tetrahedron, a geometry commonly encountered by Cu(I) complexes. This is the first report of synthesis and characterization of a metal coordinated [21]aneS₆ complex.     

反应性复合乳液的合成、表征及其交联反应

利用种子半连续乳液聚合方法合成了核层或壳层带有环氧基以及壳层带有羧基的3种不同核/壳结构的乳胶粒子,通过物理共混带环氧基和羧基的乳胶粒子,得到了两种反应性复合乳液.利用透射电镜和激光动态光散射对乳胶粒子进行了表征,其粒径分布较窄,粒径分布的多分散系数为0.062,平均粒径约76 nm,乳胶粒子具有明显的核/壳结构.通过胶膜的凝胶率和膨胀率的测定和红外光谱分析对反应性复合乳液中乳胶粒子的扩散及交联反应进行了研究,并探讨了不同核壳结构复合乳液对涂膜机械性能的影响.研究表明,当反应性复合乳液中的环氧基和羧基分别分布在乳胶粒子的核层和壳层时,有利于聚合物分子链的充分扩散和化学交联反应的进行,从而提高涂膜的物理化学性能,当甲基丙烯酸缩水甘油酯(GMA)含量为10 wt%时,涂膜的拉伸强度达20.3 MPa.     

The Crystal Structure of Pb8FeIIFeF24: an ordered Fluorite-like Compound

Pb₈Fe^IIFeF₂₄ is triclinic: a = 20.118(3) Å, b = 5.597(1) Å, c = 9.440(2) Å, α = 89.75(2)°, β = 105.79(2)°, α = 89.38(2)°, Z = 2. The structure is solved in the unconventional space group C1 , from X-ray single crystal data using 1 641 independent reflections (R = 0.048, R_w = 0.051). It is built up from the stacking of two subnetworks along the a axis: fluorite-like [Pb₈F₁₀]_n⁶ⁿ⁺ layers and infinite dimetallic [Fe^IIFeF₁₄]_n^6n? double-chains of corner-sharing octahedra running along the b axis.     

主动冷却点阵夹层防热结构温度响应计算模型北大核心CSCD

针对点阵夹层结构主动热防护问题,建立了夹层结构面板和芯体导热与冷却剂对流耦合的非稳态传热理论模型,利用有限体积法离散控制方程并在MATLAB中进行了迭代求解.模型首次考虑了面板与夹芯杆之间的收缩热阻,并利用分离变量法得到了收缩热阻的近似解析解.基于单胞模型和周期性边界条件,模拟得到了模型所需的表面对流传热系数h_(b)和h_(fin).最后,选取多单胞计算工况进行数值模拟和理论模型对比,并讨论了收缩热阻对模型预测精度的影响.结果表明:理论模型能够准确预测夹层结构及内部流体的温度变化,理论与仿真之间的最大误差不超过1%;随着外加热流密度不断增大,忽略收缩热阻使得计算结果造成的误差不断增大;与数值模拟相比,理论模型可显著地减少计算时间并节省计算资源,尤其适用于非均匀、非稳态复杂热载荷下点阵夹层结构的温度响应计算.     

曲率流的参数化有限元逼近

许多物理现象可以在数学上描述为受曲率驱动的自由界面运动,例如薄膜和泡沫的演变、晶体生长,等等.这些薄膜和界面的运动常依赖于其表面曲率,从而可以用相应的曲率流来描述,其相关自由界面问题的数值计算和误差分析一直是计算数学领域中的难点.参数化有限元法是曲率流的一类有效计算方法,已经能够成功模拟一些曲面在几类基本的曲率流下的演化过程.本文重点讨论曲率流的参数化有限元逼近,它的产生、发展和当前的一些挑战.     

Weighted local polynomial estimations of a non-parametric function with censoring indicators missing at random and their applications

In this paper, we consider the weighted local polynomial calibration estimation and imputation estimation of a non-parametric function when the data are right censored and the censoring indicators are missing at random, and establish the asymptotic normality of these estimators. As their applications, we derive the weighted local linear calibration estimators and imputation estimations of the conditional distribution function, the conditional density function and the conditional quantile function, and investigate the asymptotic normality of these estimators. Finally, the simulation studies are conducted to illustrate the finite sample performance of the estimators.     

A genetic algorithm for the automated generation of molecules within constraints

Summary A genetic algorithm has been designed which generates molecular structures within constraints. The constraints may be any useful function, for example an enzyme active site, a pharmacophore or molecular properties from pattern recognition or rule-induction analyses. The starting point may be random or may utilise known molecules. These are modified to grow into families of structures which, using the evolutionary operators of selection, crossover and mutation evolve to better fit the constraints. The basis of the algorithm is described together with some applications in lead generation, 3D database construction and drug design. Genetic algorithms of this type may have wider applications in chemistry, for example in the design and optimisation of new polymers, materials (e.g. superconducting materials) or synthetic enzymes.