Nonrandom adsorption of polyelectrolyte chains on finite regularly charged surfaces

Adsorption phenomena are relevant in a wide variety of subjects, from biophysics to technological applications. Different aspects, such as molecular recognition, multilayer deposition, and dynamics of polymer adsorption have been addressed. The methodologies used range from analytical and numerical methods to molecular dynamics or Monte Carlo simulations. In this work, a coarse‐grained model is used to explore the adsorption of charged backbones to oppositely charged regions of a surface. These regions encompass those small enough to prevent complete adsorption, but extend to surfaces sufficiently large to promote adsorption with minimal effect on the three‐dimensional conformation in bulk. Apart from the different surface areas explored, variations on the surface charge density, polyelectrolyte chain length, and chain stiffness were also considered. The degree of compaction of the polyelectrolyte, on adsorption, is different from that found in the bulk. Also, results indicate an nonuniform adsorption pattern on regularly charged surfaces. © 2013 Wiley Periodicals, Inc.     

Understanding the electronic energy transfer pathways in the trimeric and hexameric aggregation state of cyanobacteria phycocyanin within the framework of Förster theory

In the present study, the electronic energy transfer pathways in trimeric and hexameric aggregation state of cyanobacteria C‐phycocyanin (C‐PC) were investigated in term of the Förster theory. The corresponding excited states and transition dipole moments of phycocyanobilins (PCBs) located into C‐PC were examined by model chemistry in gas phase at time‐dependent density functional theory (TDDFT), configuration interaction‐singles (CIS), and Zerner's intermediate neglect of differential overlap (ZINDO) levels, respectively. Then, the long‐range pigment‐protein interactions were approximately taken into account by using polarizable continuum model (PCM) at TDDFT level to estimate the influence of protein environment on the preceding calculated physical quantities. The influence of the short‐range interaction caused by aspartate residue nearby PCBs was examined as well. Only when the protonation of PCBs and its long‐ and short‐range interactions were properly taken into account, the calculated energy transfer rates (1/K) in the framework of Förster model at TDDFT/B3LYP/6‐31+G* level were in good agreement with the experimental results of C‐PC monomer and trimer. Furthermore, the present calculated results suggested that the energy transfer pathway in C‐PC monomer is predominant from β‐155 to β‐84 (1/K = 13.4 ps), however, from α‐84 of one monomer to β‐84 (1/K = 0.3–0.4 ps) in a neighbor monomer in C‐PC trimer. In C‐PC hexamer, an additional energy flow was predicted to be from β‐155 (or α‐84) in top trimer to adjacent β‐155 (or α‐84) (1/K = 0.5–2.7 ps) in bottom trimer. © 2013 Wiley Periodicals, Inc.     

NMR shielding constants of CuX,AgX, and AuX (X = F,Cl, Br,and I) investigated by density functional theory based on the Douglas–Kroll–Hess Hamiltonian

Two‐component relativistic density functional theory (DFT) with the second‐order Douglas–Kroll–Hess (DKH2) one‐electron Hamiltonian was applied to the calculation of nuclear magnetic resonance (NMR) shielding constant. Large basis set dependence was observed in the shielding constant of Xe atom. The DKH2‐DFT‐calculated shielding constants of I and Xe in HI, I₂, CuI, AgI, and XeF₂ agree well with those obtained by the four‐component relativistic theory and experiments. The Au NMR shielding constant in AuF is extremely more positive than in AuCl, AuBr, and AuI, as reported recently. This extremely positive shielding constant arises from the much larger Fermi contact (FC) term of AuF than in others. Interestingly, the absolute values of the paramagnetic and the FC terms are considerably larger in CuF and AuF than in others. The large paramagnetic term of AuF arises from the large d‐components in the Au d_π –F p_π and Au sd_σ–F p_σ molecular orbitals (MOs). The large FC term in AuF arises from the small energy difference between the Au sd_σ + F p_σ and Au sd_σ–F p_σ MOs. The second‐order magnetically relativistic effect, which is the effect of DKH2 magnetic operator, is important even in CuF. This effect considerably improves the overestimation of the spin‐orbit effect calculated by the Breit–Pauli magnetic operator. © 2013 Wiley Periodicals, Inc.     

Structure and spectroscopic aspects of water‐halide ion clusters: A study based on a conjunction of stochastic and quantum chemical methods

In this article, we propose a stochastic search based method, namely genetic algorithm in conjunction with density functional theory to evaluate structures of water‐halide microclusters, with the halide ion being Cl^?, Br^?, and I^?. Once the structures are established, we evaluate the infrared spectroscopic modes, vertical detachment energies and natural population analysis based charges. We compare our results with available experimental and theoretical results. © 2012 Wiley Periodicals, Inc.     

Transport Studies with Composite Membrane by Sol-Gel Method

The preparation of polystyrene-based composite membrane at different pressures with varying amounts of material has been described. In order to understand the mechanism of transport of ions, membrane potential measurements were carried out using different concentrations of 1:1 electrolyte (KCl, NaCl, and LiCl) solutions and also to evaluate various membrane parameters such as mobility, distribution coefficient, and charge effectiveness controlling the transport phenomena. The membrane potential offered by the electrolytes is in the order of LiCl > NaCl > KCl, and the membrane is found to be cation selective. The large deviation in the value of K _± at the lower concentration of electrolytes was attributed to the high mobility of comparatively free charges of the strong electrolyte. Teorell, Meyer, and Sievers (TMS) method was used for the estimation of the thermodynamically fixed charge density of membranes. The data were then utilized to calculate membrane potential using the TMS theory. It was interesting to note that the theoretical predictions were borne out quite satisfactorily with experimental results.     

Emulsions of Heavy Crude Oils. II. Viscous Responses and Their Influence on Emulsion Stability Measurements

The stability of 30 heavy crude oil emulsions was studied in a parallel-plate laboratory coalescer (DC field). Particularly, viscous responses and their influence on the emulsion stability measurements were investigated. In addition to highlighting previous results from the same experimental setup and discussing these based on recent experience, new results at different temperatures and volume fractions of water were presented. A new semi-empirical model for the characteristic time of the destabilization process was presented. The electrical forces were modelled with a point-dipole approximation and the hydrodynamic resistance to droplet transport was modelled with an empirical term including the logarithmic viscosity of the oil phase. The new model clearly performed much better than the previous model, particularly for very viscous crude oils. Studies of the performance of industrial electrocoalescers have showed that simple electrostatic theory can potentially explain complex separation phenomena when the resistance to the coalescence step is reduced by an efficient demulsifier. The ultimate goal is to build a model for both the laboratory setup and the industrial coalescer so that laboratory experiments can be used to predict the behavior of the industrial process.     

Theoretical Study on the Structural and Optoelectronic Properties of the Linear Perfluorooctane Sulfonate （PFOS）

The perfluoroalkyl substances(PFS) have attracted considerable attention in recent years as a persistent global pollutant to be able to bioaccumulate in higher organisms.In this paper,theoretical analysis on electronic structures,optoelectronic properties and absorption spectra properties of the perflurooctane sulfonate(PFOS) in gas phase have been investigated by using the DFT/TD-DFT method.The geometric structures,electrostatic potentials,energy gaps,ionization potentials,electron affinities,frontier molecular orbital,excitation energies and absorption spectra for the ground state of PFOS were calculated.The result indicates that the ability of accepting electron of neutral PFOS is larger than that of anionic PFOS,while the electron excited by UV irradiation from HOMO to LUMO in the anionic PFOS is easier than that in the neutral PFOS.     

Bonding of Hydroxyl and Epoxy Groups on Graphene： Insights from Density Functional Calculations

Density functional theory and GGA-PW91 exchange correlation function were performed to simulate the bonding behavior of hydroxyl and epoxy groups on the graphene surface. We compared the different binding energies for two epoxy groups, as well as one hydroxyl group and one epoxy group on all possible positions within a 6-fold ring, respectively. The calculated results suggest that two oxygen-containing groups always tend to bind with the neighboring carbon atoms at the opposite sides. Moreover, two hydroxyl groups on the meta position are unstable, and one of the hydroxyl groups easily migrates to the para position. In contrast to the disperse arrangement, the aggregation of multiply hydroxyl groups largely enhances the binding energy of every hydroxyl group. It is worth noting that the binding sites and hydrogen bonds play an important role in stability. Our work further points out the number of oxygen-containing groups and the location of oxide region largely influence the electronic properties of graphene oxide.     

Investigation on sound absorption properties of kapok fibers

Sound absorption properties of natural kapok fibers have been investigated. Kapok fibrous assemblies with different bulk density, thickness, fiber length and orientation were manufactured, and their acoustical performances were evaluated by using an impedance tube instrument. Results show that the kapok fiber has excellent acoustical damping performance due to its natural hollow structure, and the sound absorption coefficients of kapok fibrous assemblies are significantly affected by the bulk density, thickness and arrangement of kapok fibers but less dependent on the fiber length. Compared with assemblies of commercial glass wool and degreasing cotton fibers, the kapok fiber assemblies with the same thickness but much smaller bulk density may have the similar sound absorption coefficients. Theoretical modelling of the acoustical damping performance of kapok fibers shows a good agreement with the experimental data. All the results demonstrate that kapok fiber is a promising light and environment-friendly sound absorption material.