111In–L–LDL and 153Gd–L–LDL as radiotracers for detection of AR4‐2J rat pancreatic tumors

Pancreatic cancer has an extremely poor prognosis, due, in part, to lack of methods for early diagnosis. The present study was designed to evaluate the potential of labeling low‐density lipoprotein (LDL) with a radionuclide using a lipid chelating agent, bis(stearylamide) of diethylenetriaminepentaacetic acid (L), to detect pancreatic tumors by gamma‐scintigraphy. Previous studies indicated that the difficulty of visualization of pancreatic tumors was due to their poor vascularization. This study compares the ability of two radiotracers, ¹¹¹In–L–LDL and ¹⁵³Gd–L–LDL to target highly vascularized rat pancreatic tumors (AR4‐2J) implanted in nude mice. Biodistribution studies showed that the tumor uptake of ¹¹¹In–L–LDL and ¹⁵³Gd–L–LDL tracers was twofold and fivefold higher respectively than with the controls (¹¹¹In citrate and ¹⁵³Gd citrate respectively). These tracers would thus be suitable for scintigraphic imaging. We show here that LDL could be employed as a delivery system for tracers such as ¹¹¹In or ¹⁵³Gd when these two radionuclides are complexed by a lipid‐chelating anchor, and that ¹¹¹In–L–LDL and ¹⁵³Gd–L–LDL enabled better visualization of the pancreatic tumor tissues, with a better result with ¹⁵³Gd–L–LDL. Copyright © 2004 John Wiley & Sons, Ltd.     

人原始生殖细胞的分离和体外培养

从4～10周龄药物流产胚胎的生殖嵴和肠系膜组织中分离原始生殖细胞(primordial germ cells,PGCs),培养在添加人重组白血病抑制因子(rh LIF)、人重组碱性成纤维细胞生长因子(rh bFGF)和Forskolin的小鼠饲养层细胞上.经过4～7 d培养,PGCs形成典型的鸟巢状集落.集落在传代过程中保持碱性磷酸酶活性,且胚胎阶段性特异抗原1(SSEA-1)、胚胎阶段性特异抗原3(SSEA-3)免疫荧光染色呈阳性.具有分化潜能的PGCs能在体外连续传代培养12代.结果表明从药物流产胚胎中分离的人类PGCs可以在体外培养成为具有分化潜能的多能性干细胞.     

Time resolved spectroscopic NMR imaging using hyperpolarized Xe

We have visualized the melting and dissolution processes of xenon (Xe) ice into different solvents using the methods of nuclear magnetic resonance (NMR) spectroscopy, imaging, and time resolved spectroscopic imaging by means of hyperpolarized ¹²⁹Xe. Starting from the initial condition of a hyperpolarized solid Xe layer frozen on top of an ethanol (ethanol/water) ice block we measured the Xe phase transitions as a function of time and temperature. In the pure ethanol sample, pieces of Xe ice first fall through the viscous ethanol to the bottom of the sample tube and then form a thin layer of liquid Xe/ethanol. The xenon atoms are trapped in this liquid layer up to room temperature and keep their magnetization over a time period of 11 min. In the ethanol/water mixture (80 vol%/20%), most of the polarized Xe liquid first stays on top of the ethanol/water ice block and then starts to penetrate into the pores and cracks of the ethanol/water ice block. In the final stage, nearly all the Xe polarization is in the gas phase above the liquid and trapped inside the pores. NMR spectra of homogeneous samples of pure ethanol containing thermally polarized Xe and the spectroscopic images of the melting process show that very high concentrations of hyperpolarized Xe (about half of the density of liquid Xe) can be stored or delivered in pure ethanol.     

槲寄生蛋白注射液细胞毒活性测定的MTT方法探讨

采用MTT比色法对体外培养的肿瘤细胞进行细胞毒作用实验，验证槲寄生蛋白注射液体外抗肿瘤效果．并且鉴定这种检测方法的有效性。实验结果表明槲寄生蛋白注射液有一定的体外抗肿瘤效果；MTT比色法是一种可用的体外细胞毒作用检测法，为新药品的开发提供了实验依据。     

The fabrication and characterization of poly(lactic acid) scaffolds for tissue engineering by improved solid–liquid phase separation

In this article a new technique was developed to fabricate scaffolds with a unique microstructure by solid–liquid separation in combination with particulate-leaching. Firstly, the effects of polymer concentration, quenching temperature on the porous morphology and the mechanical property of obtained scaffolds during solid–liquid separation have been investigated. Then, salt granules as porogen were introduced into the solid–liquid phase separation to produce the unique pore structure of the scaffold. The pore diameter of the scaffold could be controlled with the particulate size and the wall of pores possessed special microstructure, which enhanced the pore interconnectivity. The cell culture results confirmed that a good interconnectivity of the scaffold prepared by the improved solid–liquid separation was useful for nutrition transportation and cell proliferation. Copyright © 2003 John Wiley & Sons, Ltd.     

激光水下偏振特性用于目标图像探测

利用激光水下偏振特性获得偏振差分图像(PDI),并运用PDI技术,从理论和实验上对水下目标探测进行了研究.介绍了PDI基本概念和实验系统原理,然后比较分析了不同条件下普通图像与PDI在辨别目标距离及其纹理上的差别和PDI中背景偏振光的影响,得出利用目标和背景偏振光的差异区分二者,从而提高探测距离的结论,并取得了较好的效果.在此基础上提出了通过处理有关PDI偏振参量来进一步辨别目标与背景的设想.     

A new VOF‐based numerical scheme for the simulation of fluid flow with free surface. Part II: application to the cavity filling and sloshing problems

Finite element analysis of fluid flow with moving free surface has been performed in 2‐D and 3‐D. The new VOF‐based numerical algorithm that has been proposed by the present authors (Int. J. Numer. Meth. Fluids, submitted) was applied to several 2‐D and 3‐D free surface flow problems. The proposed free surface tracking scheme is based on two numerical tools; the orientation vector to represent the free surface orientation in each cell and the baby‐cell to determine the fluid volume flux at each cell boundary. The proposed numerical algorithm has been applied to 2‐D and 3‐D cavity filling and sloshing problems in order to demonstrate the versatility and effectiveness of the scheme. The proposed numerical algorithm resolved successfully the free surfaces interacting with each other. The simulated results demonstrated applicability of the proposed numerical algorithm to the practical problems of large free surface motion. It has been also demonstrated that the proposed free surface tracking scheme can be easily implemented in any irregular non‐uniform grid systems and can be extended to 3‐D free surface flow problems without additional efforts. Copyright © 2003 John Wiley & Sons, Ltd.     

Experimental analysis of current and deformation of ion-exchange polymer metal composite actuators

In this paper we describe the experimental analysis of a novel ion-exchange polymer metal composite (IPMC) actuator under large external voltage. The experimental analysis is supplemented with a coupled thermodynamic model, which includes mass transport across the thickness of the polymer actuator, chemical reactions at boundaries, and deformation as a function of the solvent (water) distribution. In this paper, the case of large electrode potentials (over 1.2 V) has been analyzed experimentally and theoretically. At these voltage levels, electrochemical reactions take place at both electrodes. These are used in the framework of overpotential theory to develop boundary conditions for the water transport in the bulk of polymer. The model is then simplified to a three-component system comprised of a fixed negatively charged polymeric matrix, protons, and free water molecules within the polymer matrix. Among these species, water molecules are considered to be the dominant species responsible for the deformation of the IPMC actuators. Experiments conducted at different initial water contents are described and discussed in the context of the proposed deformation mechanism. Comparison of numerical simulations with experimental data shows good agreement.     

第二讲合成孔径声纳成像及其研究进展

文章在介绍了图像声纳的特点、合成孔径声纳（synthetic aperture sonar,SAS）产生背景和发展过程的基础上,对合成孔径声纳的原理、技术难点、成像算法等问题进行了讨论.着重分析了合成孔径声纳成像过程中高分辨率的获取方法、水声信道对成像的影响、多子阵技术及其成像算法、稳定的声纳运动平台和运动监测问题、运动补偿与自聚焦方法等.文章还给出了国内外合成孔径声纳研究的最新进展情况,进而展望了合成孔径声纳的应用前景.     

Combined X-ray-electron imaging techniques: Limitations on lateral resolution

Capabilities of the imaging techniques, in which X-rays are converted to electrons and then the emitted electrons are registered by means of an electron microscope, are analyzed, the focus being on the factors limiting lateral resolution at the stage of electron emission. Bearing in mind the tendency to use harder synchrotron X-rays for some combined X-ray-electron microscopy methods, calculations were made for two significantly different X-ray energies: E = 1.828 keV (K-edge of Si) and E = 11.923 keV (L₃-edge of Au). By using Monte Carlo simulations of the electron trajectories beneath the surface of the sample we show that the radius of the spot from which photoelectrons are emitted could be as small as 1 nm. However, when proper account is taken of an entire electron cascade associated with the re-building of electron shells after photoelectron emission, spots more than one order of magnitude larger result, limiting the best lateral resolution to 20–30 nm.