AC impedance and state-of-charge analysis of a sealed lithium-ion rechargeable battery

A 7.2 V, 1.25 Ah sealed lithium-ion rechargeable battery has been studied for estimating its state-of-charge (SOC) by AC impedance. The dispersion of impedance data over the frequency range between 100 kHz and 25 mHz comprises an inductive part and two capacitive parts. As the inductive behaviour of the battery is attributed to the porous nature of the electrodes, only the capacitive components have been examined. The data obtained at several SOC values of the battery have been analyzed by a non-linear least-squares fitting procedure. The presence of two depressed semicircles in the capacitive region of the Nyquist plots necessitated the use of an electrical equivalent circuit containing constant phase elements instead of capacitances. The impedance parameters corresponding to the low-frequency semicircle have been found useful for predicting the SOC of the battery, mainly because the magnitude of these parameters and their variations are more significant than those of the high-frequency semicircle. The frequency maximum (f _max) of the semicircle, the resistive component (Z′) corresponding to f _max, the phase angle (φ) in the 5.0 Hz–0.1 Hz frequency range, the equivalent series resistance (R _s) and the equivalent series capacitance (C _s) have been identified as suitable parameters for predicting the SOC values of the lithium-ion battery. Received: 23 September 1998 / Accepted: 22 February 1999     

Particulate modification of lithium-ion battery anode materials and electrolytes

Lithium-ion batteries (LIBs) are considered a rechargeable and commercial energy storage device for electronic equipment such as smartphone and electric vehicles. Despite the prospective future of LIBs, unsatisfied electrochemical properties like reversible capacity, cycle ability and coulombic efficiency still hinder their development. High volume expansion rate, uncontrolled Li dendrite growth and unsatisfied solid electrolyte interphase also occur when LIBs are applied in long-time usage. Numerous modification methods such as exploring high-capacity anode/cathode materials, constructing artificial solid electrolyte interphase and improved conductive binders can be adopted to enhance the performances. Among them, particulate modification for LIBs anode and electrolytes is receiving tremendous attraction in the recent work. The method is composed of changing the morphology and particle size of the active materials, also introduce nano-size additives to the main structure. This review emphasizes on introducing and discussing the modification in following aspects: particulate modification on carbon group IVA element anodes, introduction of additives like transition metal oxide nanoparticles into anode and electrolyte materials, dissipate the influence of Li dendrite growth and ameliorate the performances of solid electrolyte interface. This review hopes to be denoted for the future development of LIBs with the comprehensive understanding on the particulate modification.     

等离子体光谱光源技术的进展

光谱光源是光谱仪器和光谱技术的核心,等离子体光源是原子发射光谱技术的活跃领域之一,电感耦合等离子体(ICP)已成功地应用于原子发射光谱和无机质谱仪器。由于ICP光源采用氩气作为工作气体,耗量较大,降低氩气用量成为近些年来原子光谱技术研究和改进的重要目标。为此目的,已研究过各种低耗氩ICP光源,非氩气ICP光源,微波等离子体光源,射频电容耦合等离子体光源等。综述了近年这些等离子体发射光源的结构,分析性能及特点,以及它们所用工作气体情况。并归纳总结出,评价各种等离子体发射光谱光源应包括:等离子体温度(激发温度,气体温度),电子密度,工作气体种类及用量,元素检出限,光源的稳健性及经济方面等。     

C/Ni(OH)2非对称电化学电容器正极改性研究

在C／KOH／Ni(OH)2型非对称电化学电容体系中,Ni(OH)2电极需具有快速发生电化学反应的能力与活性炭负极匹配。本文通过增加微集流体的掺杂比例．对活性物质进行球磨处理、固相掺杂碳纳米管等方法对正极进行改性研究。实验发现,增加正极微集流体的掺杂比例．可明显改善非对称电容大电流条件下的容量和循环性能;对正极活性物质进行球磨处理,有利于电极活性物质的转变．加快非对称电容的活化速度;在正极固相掺杂一定比例的碳纳米管可提高非对称电容的充放电效率和容量性质。     

纯Cr2O3包覆Li4Ti5O12微球的制备及其储锂性能研究

The pure Cr₂O₃ coated Li₄Ti₅O₁₂ microspheres were prepared by a facile and cheap solutionbased method with basic chromium(III) nitrate solution (pH=11.9). And their Li-storage properties were investigated as anode materials for lithium rechargeable batteries. The pure Cr₂O₃ works as an adhesive interface to strengthen the connections between Li₄Ti₅O₁₂ particles, providing more electric conduction channels, and reduce the inter-particle resistance. Moreover, LixCr₂O₃, formed by the lithiation of Cr₂O₃, can further stabilize Li₇Ti₅O₁₂ with high electric conductivity on the surface of particles. While in the acid chromium solution (pH=3.2) modification, besides Cr₂O₃, Li₂CrO₄ and TiO₂ phases were also found in the final product. Li₂CrO₄ is toxic and the presence of TiO₂ is not welcome to improve the electrochemical performance of Li₄Ti₅O₁₂ microspheres. The reversible capacity of 1% Cr₂O₃-coated sample with the basic chromium solution modification was 180 mAh/g at 0.1 C, and 134 mAh/g at 10 C. Moreover, it was even as high as 127 mAh/g at 5 C after 600 cycles. At-20℃, its reversible specific capacity was still as high as 118 mAh/g.     

超级电容在中性束弧放电电源中的应用研究

介绍了超级电容的结构原理与电路模型,以及超级电容在托卡马克装置实验中的应用。综合分析了大功率离子源弧放电电源的供电特性以及HL-2A 装置1MW 中性束注入系统的弧电源供电电路拓扑。提出了一种基于超级电容储能的5MW 中性束注入离子源弧放电电源供电方案,它能减小所需的电网容量,具有更小的体积和更高的效率、控制简单、响应速度快等特点。提出了采用恒压控制方式的基于超级电容供电的5MW 中性束注入离子源灯丝电源方案,分析了该方案的可行性和技术优势。为均衡用许多超级电容串并联组合储能时单体超级电容的电压,提出了一种可靠、高效的电压均衡电路。     

水热合成制备Al掺杂α-MnO2纳米管及其超级电容器电化学性能

通过水热法制备了未掺杂α-MnO₂和Al 掺杂α-MnO₂, 对产物的形貌、结构和电化学性能进行了研究. 扫描电镜(SEM)和高分辨透射电镜(HRTEM)观察表明制备产物呈纳米管形态. 紫外-可见光谱分析计算了产物的能带间隙: 随着Al 的掺杂, α-MnO₂的能带间隙值降低. 以未掺杂α-MnO₂与Al 掺杂α-MnO₂作为电极材料, 通过循环伏安(CV)和恒流充放电测试电极的超级电容器性能. 在50 mA·g^-1电流密度下, 未掺杂α-MnO₂与Al 掺杂α-MnO₂电极的比电容分别达到了204.8 和228.8 F·g^-1. 电化学阻抗谱(EIS)分析表明Al 的掺杂降低了α-MnO₂在电解液中的阻抗, 有利于提高其电化学比电容. 增强的比电容及在1000个循环后仍具有良好的容量保持率,使Al 掺杂α-MnO₂在超级电容器中具有较好的应用前景.     

二氧化锰含量对活性炭电极电化学性能的影响

本文采用液相法、热分解MnCO₃法以及电解沉积法制备不同二氧化锰粉末,并将其与活性炭复合,应用于水系超级电容器. 使用X射线衍射（XRD）、扫描电子显微镜（SEM）技术对材料形貌进行表征. 使用循环伏安法以及恒流充放电法对其电化学性能进行测试. 实验数据表明,α-MnO₂（质量分数70%）掺杂活性炭电极的最大比容量为151 F•g^-1,β-MnO₂（质量分数60%）掺杂活性炭电极的最大比容量为172F•g^-1,γ-MnO₂（质量分数50%）掺杂活性炭电极的最大比容量为141F•g^-1,但二氧化锰粉末对电极内阻的影响呈无规律性.     

脉冲形成网络的设计与实验研究

 采用陶瓷无感电容器作为储能介质,设计了一种低阻抗高储能密度的中等高压脉冲形成网络。该脉冲形成网络采用无感陶瓷电容器作为储能介质,每一个电容器的容值为1.7 nF。电容器采用相对介电常数较高的钛酸钡作为材料,单个电容器的直径为6 cm、高度为4 cm,该电容器在变压器油中的工作电压可以达到50 kV。实验结果表明,设计的单线型中等高压脉冲形成网络可在1 Ω的匹配负载上获得半高宽220 ns,前沿为40 ns的高压脉冲,能很好满足脉冲功率系统小型化的应用要求。实验研究还表明,设计的低阻抗Blumlein型脉冲形成网络,在工作电压为44 kV时可在2.5 Ω的低阻抗负载上获得脉宽230 ns,前沿约为50 ns的脉冲。     

用电子分析天平测量静电力及真空介电常量

介绍了用电子分析天平测量平行板电容器两极板间的静电力和真空介电常量的原理和方法．