Preparation and electrochemistry of one-dimensional nanostructured MnO2/PPy composite for electrochemical capacitor

One-dimensional nanostructured manganese dioxide/polypyrrole (MnO₂/PPy) composite was prepared by in situ chemical oxidation polymerization of pyrrole in the host of inorganic matrix of MnO₂, using complex of methyl orange (MO)/FeCl₃ as a reactive self-degraded soft-template. The morphology and structure of the composite were characterized by infrared spectroscopy (IR) X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results show that the MnO₂/PPy composite consists of α-MnO₂ and PPy with nanotube-like structure. Electrochemical properties of the composite demonstrated the material showed good electrochemical reversibility after 500 charge-discharge cycles in the potential range of −0.4 to 0.6 V, the tube-like nanocomposite has the potential application in electrochemical capacitor.     

润湿特性对超级电容器储能动力学的影响机理

润湿特性对超级电容器储能性能有着至关重要的影响。借助分子动力学模拟,本文研究了润湿特性对超级电容器储能动力学行为的影响。以石墨烯和晶体铜作为疏电解液和亲电解液电极材料。结果表明,在充电过程中,亲电解液铜电极呈现出非对称的U型微分电容曲线,负极电容是正极的～5.77倍,不同于经典双电层理论Gouy-Chapman-Stern(对称U型)和疏电解液型。该现象与离子自由能阻力分布密切相关,负极自由能阻力远小于正极(～2倍)和疏电解液电极,进而有利于强化双电层结构对电极电压的响应能力,导致更高微分电容。通过微分离子电荷密度,本文再现了微分电容演变规律,并发现改善润湿性会显著降低双电层厚度。最后,我们指出润湿性直接影响储能微观机理,将电荷储存机制从离子吸附和交换共同主导(疏电解液)转变到离子吸附主导(亲电解液)。本文所得结论揭示了润湿特性对储能动力学行为影响的原子层级机理,对超级电容器材料设计、构筑与润湿特性调控具有重要指导意义。     

Efficient Piezoelectric Energy Harvesting from a Discrete Hybrid Bismuth Bromide Ferroelectric Templated by Phosphonium Cation

Bismuth containing hybrid molecular ferroelectrics are receiving tremendous attention in recent years owing to their stable and non-toxic composition. However, these perovskite-like structures are primarily limited to ammonium cations. Herein, we report a new phosphonium based discrete perovskite-like hybrid ferroelectric with a formula [Me(Ph)₃P]₃[Bi₂Br₉] ( MTPBB ) and its mechanical energy harvesting capability. The Polarization-Electric field (P-E) measurements resulted in a well-defined ferroelectric hysteresis loop with a remnant polarization value of 2.1 μC cm⁻². Piezoresponse force microscopy experiments enabled visualization of the ferroelectric domain structure and evaluation of the piezoelectric strain coefficient (d₃₃) for an MTPBB single crystal and thin film sample. Furthermore, flexible devices incorporating MTPBB in polydimethylsiloxane (PDMS) matrix at various concentrations were fabricated and explored for their mechanical energy harvesting properties. The champion device with 20 wt % of MTPBB in PDMS rendered a maximum peak-to-peak open-circuit voltage of 22.9 V and a maximum power density of 7 μW cm⁻² at an optimal load of 4 MΩ. Moreover, the potential of MTPBB -based devices in low power electronics was demonstrated by storing the harvested energy in various electrolytic capacitors.     

The Signal Amplification in Electrochemical Detection of Chloramphenicol Using Sulfonated Polyaniline‐chitosan Composite as Redox Capacitor

In this work, a novel redox capacitor was designed for signal amplification in electrochemical detection. It was fabricated by co‐electrodeposition of a conducting polymer, sulfonated polyaniline (SPAN) and chitosan on a glass carbon electrode, and its function was evaluated for being a localized source to transfer electron between FcCOOH (Fc) and Ru(NH₃)₆Cl₃ in solution via redox cycling. Furthermore, the electrochemical detection of chloramphenicol, a broad‐spectrum antibiotic was performed using the redox capacitor in the presence of Fc. A significant amplification in cathodic current response of chloramphenicol was obtained through a continuous redox‐cycling reaction. The performance of the amplifying signal responded linearly to chloramphenicol in a concentration range of 0.05 to 50.0 μmol L⁻¹ with a low detection limit of 0.01 μmol L⁻¹. The proposed approach exhibited good reproducibility and stability, and could be used for detection of chloramphenicol in eye drops by standard addition method with the recoveries from 96.5 % to 103.0 %.     

Synthesis and electrochemical performanceof cobalt disulfide

The anode material cobalt disulfide for lithium-ion batteries was synthesized using the hydrothermal method at a lower temperature. The microstructure and surface morphology of the powders were characterized by means of X-ray diffraction (XRD) and scanning electron microscopy (SEM). Electrochemical tests showed that this sample had superior electrochemical properties. The first discharge capacity is up to 1313.9 mAh/g in the voltage range of 3.00–0.02 V at a current density of 50 mA/g. Adjusting the voltage range to 3.00–0.50 V, the first discharge capacity decreases, but the 20th discharge capacity is 435.5 mAh/g, which is better than what has been reported in the literature.     

Effect of different conductive additives on charge/discharge properties of LiCoPO<Subscript>4</Subscript>/Li batteries

Single-phase LiCoPO₄ nanoparticles were synthesized by solid-state reaction method and subsequent high-energy ball milling. The electrochemical properties of LiCoPO₄/Li batteries were analyzed by ac impedance experiments, cyclic voltammetry (CV), and charge/discharge tests. The structural and morphological performance of LiCoPO₄ nanoparticles was investigated by X-ray diffraction (XRD), scanning electron microscope (SEM), and transmission electron microscope (TEM). The XRD result demonstrated that LiCoPO₄ nanoparticles had an orthorhombic olivine-type structure with a space group of Pmnb. Different conductive additives including acetylene black and carbon black (SP270) were used to fabricate electrodes. The morphologies of the electrodes and different conductive additives were observed by field emission-scanning electron microscopy (FE-SEM). LiCoPO₄/Li battery with acetylene black showed the best electrochemical properties, and exhibited a discharge plateau at around 4.7 V with an initial discharge capacity of 110 mAh g⁻¹ at a discharge current density of 0.05 mA cm⁻² at 25 °C.     

Amide-Based Ionic Liquid Electrolytes for Alkali-Metal-Ion Rechargeable Batteries

Ionic liquids (ILs) have a wide variety of applications in energy storage and material production. ILs are composed of only cations and anions, without any molecular solvents, and are generally known as “designer liquids (solvents)” because their physicochemical properties can be tuned by the combination of ionic species. In recent several decades, research and development activities of rechargeable batteries have garnered considerable attention because certain groups of ILs exhibit high electrochemical stability and moderate ionic conductivity, rendering them suitable for application in high-voltage batteries. ILs with amide anions are representative electrolytes and are extensively researched by many research groups, including our group. This paper focuses on amide-based ILs as electrolytes for alkali-metal-ion rechargeable batteries, introducing their history, characteristics, and existing challenges to be addressed.     

计算电容中Fabry-Perot干涉仪测量位移的相位修正方法

计算电容是复现电学阻抗单位的基准装置, 利用计算电容值和量子霍尔电阻值可以准确计算出精细结构常数α. 计算电容的本质是通过高准确度地测量屏蔽电极的位移, 实现对电容量值的测量. 因此, 基于Fabry-Perot干涉仪的精密电极位移测量系统是计算电容装置中最为核心和关键的部分. 在Fabry-Perot干涉仪测位移过程中, 由于高斯激光束存在轴向Gouy相位, 该附加相位将会引起相邻干涉条纹对应位移的变化(大于或者小于λ/2), 导致位移的测量值与实际值存在偏差. 本文阐述了高斯激光场的传播特性, 利用高斯激光束在自由空间和透过薄透镜复振幅的变换关系, 建立了计算电容装置中Fabry-Perot干涉仪透射光束的传输模型; 通过对不同腔长的Fabry-Perot干涉仪透射光场相位的分析, 获得了高斯激光束轴向Gouy相位修正与传输距离的关系. 结果表明, 当腔长从111.3 mm移动至316.3 mm时, 在接收距离为560 mm的情况下, 高斯光束轴向Gouy 相位引起的位移修正的绝对值最小为0.7 nm, 其相对相位修正量|δL|/|ΔL| = 3.4×10^-9.     

一种新型的单色高亮度LED物屏

本介绍一种新型的单色LED物屏。该物屏具有成像清晰、造价低廉、制作方便的特点。     

准平衡模型下脉冲MOS电容器的瞬态特性

本文给出了描写咏冲MOS电容器的瞬态特性的微分方程.产生区宽度采用准平衡模型来计算,反型少子的非稳态产生的影响已被计及.文中给出了用Runge-Kutta方法得到的1-t和C-t瞬态特性曲线,并进行了详细讨论