Optical decoherence and persistent spectral hole burning in Er:LiNbO3

Developing new resonant optical materials for spatial-spectral holography and quantum information applications requires detailed knowledge of the decoherence and population relaxation dynamics for the quantum states involved in the optical transitions, motivating the need for fundamental material studies. We report recent progress in studying these properties in erbium-doped lithium niobate at liquid helium temperatures. The influence of temperature, applied magnetic fields, measurement timescale, and dopant concentration were probed using photon echo spectroscopy and time-resolved spectral hole burning on the 1532 nm transition of Er³⁺:LiNbO₃. Effects of spectral diffusion due to interactions between Er³⁺ ions and between the Er³⁺ ion and ⁷Li and ⁹³Nb nuclear spins in the host lattice were observed. In addition, long-lived persistent spectral storage of seconds to minutes was observed due to non-equilibrium population redistribution among superhyperfine states.     

Rapid preparation of high electrochemical performance LiFePO4/C composite cathode material with an ultrasonic-intensified micro-impinging jetting reactor

A joint chemical reactor system referred to as an ultrasonic-intensified micro-impinging jetting reactor (UIJR), which possesses the feature of fast micro-mixing, was proposed and has been employed for rapid preparation of FePO₄ particles that are amalgamated by nanoscale primary crystals. As one of the important precursors for the fabrication of lithium iron phosphate cathode, the properties of FePO₄ nano particles significantly affect the performance of the lithium iron phosphate cathode. Thus, the effects of joint use of impinging stream and ultrasonic irradiation on the formation of mesoporous structure of FePO₄ nano precursor particles and the electrochemical properties of amalgamated LiFePO₄/C have been investigated. Additionally, the effects of the reactant concentration (C = 0.5, 1.0 and 1.5 mol L⁻¹), and volumetric flow rate (V = 17.15, 51.44, and 85.74 mL min⁻¹) on synthesis of FePO₄·2H₂O nucleus have been studied when the impinging jetting reactor (IJR) and UIJR are to operate in nonsubmerged mode. It was affirmed from the experiments that the FePO₄ nano precursor particles prepared using UIJR have well-formed mesoporous structures with the primary crystal size of 44.6 nm, an average pore size of 15.2 nm, and a specific surface area of 134.54 m² g⁻¹ when the reactant concentration and volumetric flow rate are 1.0 mol L⁻¹ and 85.74 mL min⁻¹ respectively. The amalgamated LiFePO₄/C composites can deliver good electrochemical performance with discharge capacities of 156.7 mA h g⁻¹ at 0.1 C, and exhibit 138.0 mA h g⁻¹ after 100 cycles at 0.5 C, which is 95.3% of the initial discharge capacity.     

Facile synthesis of low-dimensional SnO2 nanostructures: An investigation of their performance and mechanism of action as anode materials for lithium-ion batteries

Owing to high-energy density of rechargeable lithium-ion batteries (LIBs), they have been investigated as an efficient electrochemical power sources for various energy applications. High theoretical capacities of tin oxide (SnO₂) anodes have led us a path to meet the ever-growing demands in the development of high-performance electrode materials for LIBs. In this paper, a facile approach is described for the synthesis of porous low-dimensional nanoparticles and nanorods of SnO₂ for application in LIBs with the help of Tween-80 as a surfactant. The SnO₂ samples synthesized at different reaction temperatures produced porous nanoparticles and nanorods with average diameters of ~7–10 nm and ~70–110 nm, respectively. The SnO₂ nanoparticle electrodes exhibit a high reversible charge capacity of 641.1 mAh/g at 200 mA/g after 50 cycles, and a capacity of 340 mAh/g even at a high current density of 1000 mA/g during the rate tests, whereas the porous nanorod electrodes delivers only 526.3 mAh/g at 200 mA/g after 50 cycles and 309.4 mAh/g at 1000 mA/g. It is believed that finer sized SnO₂ nanoparticles are much more favorable to trap more Li⁺ ion during electrochemical cycling, resulting in a large irreversible capacity. In contrast, rapid capacity fading was observed for the porous nanorods, which is the result of their pulverization resulting from repeated cycling.     

Hydrothermal synthesis of FeS2 for lithium batteries

Nanocrystalline FeS₂ cathode material of lithium cell was synthesized from cheap materials of FeSO₄, Na₂S₂O₃, and sulfur by a hydrothermal process. The scanning electron microscopy analysis showed the obtained material was nano-sized, about 500 nm. The X-ray powder diffraction analysis showed that the synthetic FeS₂ material had two phases of the crystalline structure, pyrite and marcasite. The phase of marcasite seems to have no negative effect on the electrochemical performance of the material. The synthetic FeS₂ showed a significant improvement of electrochemical performance for Li/FeS₂ cells.     

EPR and optical measurements of weakly doped LiNbO3: Er

Optical spectroscopy measurements of the congruent LiNbO₃ (LN) single crystals, weakly doped with Er (0.1–0.3 wt%) and Er (0.3 wt%) and Yb (0.5 wt%), have been carried out. The shape of the optical absorption and additional absorption bands registered after γ-irradiation suggests the presence of Er³⁺ ion pairs. EPR investigations were performed for LN single crystal doped with Er (0.1 wt%). Unusual behaviour of the temperature dependence of the intensity and linewidth of the main EPR line—corresponding to the fine transition of ^evenEr³⁺—ions, is reported. The main EPR line appears to be a superposition of several paramagnetic centres originating from isolated ^evenEr³⁺ ions and ^evenEr³⁺–^evenEr³⁺ pairs of ions. In low temperature region (below 20 K), the main EPR signal is dominated by signals arising from ^evenEr³⁺–^evenEr³⁺ pairs of ions. The inverse intensity of the EPR line at low temperature region fulfils the Curie–Weiss law and enabled to determine the Curie–Weiss constant Θ=1.5±0.5 K. The positive sign of Θ suggests that the ferromagnetic interactions arise in the system of ^evenEr³⁺–^evenEr³⁺ ion pairs in LN. Our results suggest that the distribution of Er ions in congruent LN is not homogeneous and Er impurity ions can form clusters in host lattice even in the case of weak erbium doping.     

纳米碳管的电化学贮锂性能

用透射电镜、高分辨透射电镜、X射线衍射和拉曼光谱表征了用催化热解法制备的纳米碳管的结构,研究了纳米碳管的电化学嵌脱锂性能。以纳米级铁粉为催化剂热解乙炔气得到的纳米碳管石墨化程度较低,结构中存在褶皱的石墨层、乱层石墨和微孔等缺陷,具有国交高的贮锂容量,初始容量为640mAh/g,但循环稳定性较差。而以纳米级氧化铁粉为催化剂热解乙烯得到的纳米碳管结构比较规则,循环稳定性较好,但贮锂容量较低,初始容量为282mAh/g。讨论了纳米碳管的结构对其温度特性和不同电流密度下的充放电容易的影响。     

Na2SnO3系催化剂在甲烷氧化偶联反应中的催化性能及表面碱性的探讨

1982年Keller和Bhasin以金属氧化物为催化剂从甲烷制得少量乙烯和乙烷的工作引起了各国研究工作者的重视,此后报道了许多有研究价值的催化剂,其中添加碱金属对提高催化性能所起的作用引起了普遍的关注.Lunsford等首先用添加Li~+的MgO作催化剂,发现催化剂表面碱性增强的同时,生成C_2烃类产物的选择性明显增加.随后Iwamatu等在MgO中添加Na~+及Rb~+盐,Jones等在Mn~(4+)/SiO_2中添加Na~+,Otsuka等在Sm_2O_3中添加LiCl作为甲烷氧化偶联催化剂进行了研究,这些结果均表明,因添加碱金属使催化剂呈现     

Microwave assisted hydrothermal synthesis of tin niobates nanosheets with high cycle stability as lithium-ion battery anodes

SnNb₂O₆ and Sn₂Nb₂O₇ nanosheets were synthetized via microwave assisted hydrothermal method, and innovatively employed as anode materials for lithium-ion battery. Compared with Sn₂Nb₂O₇ and the previously reported pure Sn-based anode materials, the SnNb₂O₆ electrode exhibited outstanding cycling performance.     

Asymmetric syntheses of dihydroxyhomoprolines via doubly diastereoselective lithium amide conjugate addition reactions

The asymmetric syntheses of novel dihydroxyhomoprolines have been achieved using the doubly diastereoselective conjugate additions of the antipodes of lithium N-benzyl-N-(α-methylbenzyl)amide to a set of four chiral α,β-unsaturated esters (derived from d-pentoses) as one of the key steps. A full account of the diastereoselectivity observed in these conjugate additions is presented and the stereochemical outcomes of these reactions have been established unambiguously via a combination of hydrogenolytic chemical correlation and single crystal X-ray diffraction analyses. A tandem hydrogenolysis/intramolecular reductive amination reaction was then used to create the corresponding enantiopure pyrrolidines, providing access to (2′S,3′S,4′R)-dihydroxyhomoproline and (2′S,3′R,4′S)-dihydroxyhomoproline after deprotection.