Electrochemical reaction of lithium with nanosized vanadium antimonate

Nanometric vanadium antimonate, VSbO₄, was prepared by mechanical milling from Sb₂O₃ and V₂O₅ and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), Mossbaüer spectroscopy (MS) and X-ray photoelectron spectroscopy (XPS) techniques. Its reactivity towards lithium was examined by testing Li/VSbO₄ cells under galvanostatic and potentiostatic regimes. The amount of Li inserted was found to be consistent with a two-step process involving the reactions (i) VSbO₄+8 Li→Sb+V+4 Li₂O and (ii) Sb+3 Li→Li₃Sb, the former being virtually irreversible and the latter reversible as suggested by the shape of the anodic and cathodic curves. Ex situ XPS measurements of the discharged and charged electrode provided direct evidence of the formation of alloyed Sb and confirmed the results of the potentiostatic curves regarding the irreversible or reversible character of the previous reactions. The Li/VSbO₄ cell exhibited acceptable electrochemical performance, which surpassed that of other Sb-based compounds as the likely result of the formation of V and its associated enhanced electrode conductivity.     

Ternäre Lithium-Selten-Erd-Nitrate mit einsamen Nitrationen: Li3[M(NO3)5](NO3) (M = Gd?Lu,Y). Die Kristallstruktur von Li3Er(NO3)6

Ternary Lithium Rare Earth Nitrates with Lonesome Nitrate Ions: Li₃[M(NO₃)₅](NO₃) (M = Gd? Lu, Y). The Crystal Structure of Li₃Er(NO₃)₆ Single crystals of the ternary nitrate Li₃Er(NO₃)₆ are obtained from a solution of “Er(NO₃)₃” in the melt of LiNO₃. In Li₃Er(NO₃)₆ (monoclinic, P2₁/n, Z = 4; a = 776.0(1); b = 748.86(8); c = 2 396(1) pm; β = 90.76(3)°; R1 = 0.0490; wR2 = 0.0792), Er³⁺ is surrounded by five bidentate nitrate ligands yielding the anionic units [Er(NO₃)₅]^2?. These are arranged in the direction of the 2₁ screw axis. Two lonesome NO₃^? ions are in the middle of such a “helix” and are connected by Li⁺ with the anions [Er(NO₃)₅]^2?. The helices are moved against each other by about half of the lattice constant a and are connected by further Li⁺ ions.     

Surface structure and electrochemical characteristics of natural graphite fluorinated by ClF3

Natural graphite samples with average particle sizes of 5, 10 and 15 μm (NG5 μm, NG10 μm and NG15 μm, respectively) were fluorinated by ClF₃ (3 × 10⁴ Pa) at 200 and 300 °C for 2 min. X-ray photoelectron spectra of surface-fluorinated samples showed that surface fluorine concentration increased with increase in the particle size of graphite and reaction temperature. Small amounts of chlorine were also detected in all the fluorinated samples. Raman spectra of original and surface-fluorinated samples indicated that the surface disordering was increased for NG10 μm and NG15 μm. Surface areas were decreased by the fluorination for NG5 μm and NG10 μm but unchanged for NG15 μm. The mesopores with diameter of 1.5-2 nm increased while those of 2-3 nm decreased for all the samples. First coulombic efficiencies for NG10 μm and NG15 μm were highly increased by surface fluorination in 1 mol/dm³ LiClO₄-EC/DEC/PC (EC: ethylene carbonate, DEC: diethyl carbonate, PC: propylene carbonate) solution.     

Hydrolysis in the system LiPF6—propylene carbonate—dimethyl carbonate—H2O

¹⁹F and ³¹P NMR spectroscopy were used to study the kinetics of the hydrolysis of LiPF₆ in the homogenous solvent system propylene carbonate (PC)—dimethyl carbonate (DMC)—H₂O. It was found that the main products of the hydrolysis are HF, LiPO₂F₂ and Li₂PO₃F. The content of POF₃ and PF₅ was negligibly low. We set up a hypothesis that the main factor determining the rate of the process is the so-called ‘secondary’ catalytic effect, caused by solvated H⁺ ions.     

Novel composite anode materials for lithium ion batteries with low sensitivity towards humidity

Graphitic anode materials for lithium ion batteries processed under high humidity conditions show severe performance losses. The sensitivity of these materials towards humidity can be significantly reduced by adsorbing metal ions like silver or copper ions, with subsequent heat treatment of these composites. Results of X-ray photoelectron spectroscopy, high-resolution electron microscopy, thermogravimetry, and differential thermal analysis indicate that the deposited metals exist in metallic and carbide, M_xC (M=Cu or Ag), forms. They remove or cover (i.e. deactivate) active hydrophilic sites at the surface of the graphite. These composites absorb less water during processing. The electrochemical performance, including reversible capacity, coulombic efficiency in the first cycle, and cycling behavior, is markedly improved. This approach provides a potentially powerful method to manufacture lithium ion batteries under less demanding conditions.Presented at the 3rd International Meeting on Advanced Batteries and Accumulators, 16–20 June 2002, Brno, Czech Republic     

Palladium-catalyzed reactions for the synthesis of chlorins and 5,10-porphodimethenes

The palladium-catalyzed reaction of RLi with various 5,10,15,20-tetrasubstituted porphyrins offers a convenient synthetic route to chlorins and porphodimethenes (calixphyrins). The reactions utilized various Pd catalysts and CuI and yielded either 2,3-substituted chlorins or 5,10-disubstituted porphodimethenes in yields ranging from 20-40%. The reaction of octaethylporphyrin with t-BuLi in the presence of a Pd-catalyst generated the corresponding 5,10-porphodimethene in 72% yield.     

Novel Gel—like Process for Synthesizing Submicron LiaNi0.8Co0.2O2 Powders Used in Lithium Ion Batteries

A novel gel-like process has been developed for synthesizing LiaNi0.8Co0.2O2 powders,using citric acid as a chelating agent. This process improves the homogeneity of constituent cation and enhances their reactivity in the obtained precursor. The results of electrochemical test demonstrated that these materials exhibited excellent electrochemical properties. Its initial capacity reached 181.6 mAh/g and reversible efficiency at the first cycle is about 88.6%.     

聚1-氨基蒽醌在二次锂电池正极材料中的应用

采用化学方法合成聚1-氨基蒽醌并用于二次锂电池正极材料,通过红外光谱、扫描电镜、粒度测试、循环伏安以及充放电测试等方法对材料的官能团结构、微观形貌、颗粒大小以及电化学性能等进行了研究与分析.实验表明,与金属锂组成二次锂电池后,聚1-氨基蒽醌达到了218.3 mAh•g－1的首次放电容量,经过25次循环后仍可保持较高的充放电效率.由于材料具有较高的能量密度且不含对环境有污染的元素S,因此是二次锂电池非常有希望的正极材料.