A valence bond model for aqueous Cu(II) and Zn(II) ions in the AMOEBA polarizable force field

A general molecular mechanics (MM) model for treating aqueous Cu²⁺ and Zn²⁺ ions was developed based on valence bond (VB) theory and incorporated into the atomic multipole optimized energetics for biomolecular applications (AMOEBA) polarizable force field. Parameters were obtained by fitting MM energies to that computed by ab initio methods for gas‐phase tetra‐ and hexa‐aqua metal complexes. Molecular dynamics (MD) simulations using the proposed AMOEBA‐VB model were performed for each transition metal ion in aqueous solution, and solvent coordination was evaluated. Results show that the AMOEBA‐VB model generates the correct square‐planar geometry for gas‐phase tetra‐aqua Cu²⁺ complex and improves the accuracy of MM model energetics for a number of ligation geometries when compared to quantum mechanical (QM) computations. On the other hand, both AMOEBA and AMOEBA‐VB generate results for Zn²⁺–water complexes in good agreement with QM calculations. Analyses of the MD trajectories revealed a six‐coordination first solvation shell for both Cu²⁺ and Zn²⁺ ions in aqueous solution, with ligation geometries falling in the range reported by previous studies. © 2012 Wiley Periodicals, Inc.     

XPS of oxygen atoms on Ag(111) and Ag(110) surfaces: Accurate study with SAC/SAC‐CI combined with dipped adcluster model

O1s core‐electron binding energies (CEBE) of the atomic oxygens on different Ag surfaces were investigated by the symmetry adapted cluster‐configuration interaction (SAC‐CI) method combined with the dipped adcluster model, in which the electron exchange between bulk metal and adsorbate is taken into account properly. Electrophilic and nucleophilic oxygens (O_elec and O_nuc) that might be important for olefin epoxidation in a low‐oxygen coverage condition were focused here. We consider the O1s CEBE as a key property to distinguish the surface oxygen states, and series of calculation was carried out by the Hartree–Fock, Density functional theory, and SAC/SAC‐CI methods. The experimental information and our SAC/SAC‐CI results indicate that O_elec is the atomic oxygen adsorbed on the fcc site of Ag(111) and that O_nuc is the one on the reconstructed added‐row site of Ag(110) and that one‐ and two‐electron transfers occur, respectively, to the O_elec and O_nuc adclusters from the silver surface. © 2013 Wiley Periodicals, Inc.     

Aromatic H／D Exchange Reaction Catalyzed by Groups 5 and 6 Metal Chlorides

Groups 5 and 6 metal chlorides such as MoCl5, WCI6, NbCl5 and TaCl5 were found to be simple and very efficientcatalysts for the aromatic H/D exchange reactions. Compared with other metal chlorides such as ZnCl2, SnCl4 and TiCl4, groups 5 and 6 metal chlorides showed better catalytic activity in the H/D exchange reaction of naphthalene with C6D6. Deuteration of anthracene using MoC15 as a catalyst proceeded within 24 h at room temperature. Other aromatic compounds such as toluene, diphenylmethane and 1,1,2-triphenylethane were also deuterated smoothly in C6D6 within 24 h at room temperature.     

金属酞菁化合物在TiO2表面的分散研究

Dispersion of copper(Ⅱ) phthalocyanine (CuPc), copper(Ⅱ) phthalocyaninesulfonate (CuPcS) and cobalt(Ⅱ)phthalocyaninetetrasulfonate (CoPcTS) on the surface of titanium dioxide was investigated by XRD, XPS, FT-IR and UV-Vis techniques. Results show that interaction between CuPc and TiO2 was very weak and CuPc was difficult to disperse on the surface of the support. While partly sulfurized CuPcS could be dispersed on the surface of support through sulfo-groups and its dispersion capacity was determined to be 0.085 g CuPcS/g TiO2. Completely sulfurlzed CoPcTS could also be dispersed on the surface of TiO2 as a monolayer and its dispersion capacity was 0.12 g CoPcTS/g TiO2. Interactions of the sulfo-groups as well as the electrons of CoPcTS with the surface of TiO2 could be evidenced by FT-IR characterization. Therefore, it was suggested that CoPcTS molecules be adsorbed on the surface of TiO2 in a flat-lying mode while CuPcS in a slanting one. UV-Vis spectra show that the dispersed CuPcS and CoPcTS molecules exist in both forms of monomers and dimers.     

Spectroscopy, NMR and DFT studies on molecular recognition of crown ether bridged chiral heterotrinuclear salen Zn(II) complex

A barium-containing crown ether bridged chiral heterotrinuclear salen Zn(II) complex BaZn2L(ClO4)2, where L is a folded dinuclear chiral (R,R)-salen ligand, has been synthesized and characterized by elemental analysis, 1H NMR, UV-vis, IR, circular dichroism (CD) spectra, and mass spectra. As a folded dinuclear chiral host, its recognition with achiral guests (imidazole derivatives), rigid bidentate guest (1,4-diazobicyclo[2,2,2]octane, DABCO) and chiral guests (amino acid methyl esters) was investigated by means of UV-vis spectrophotometric titration, CD spectra. The association constants of D-amino acid methyl esters are found to be higher than those of their L-enantiomer. The sandwich-type binding of BaZn2L(ClO4)2-DABCO supramolecular assembly was specially studied via 1H NMR titration and 1H ROESY. To understand the recognition on molecular level, density functional theory (DFT) calculations on B3LYP/LanL2DZ were performed on the minimal energy conformations of host, guests, and host-guest complexes. The minimal energy conformations were obtained by molecular mechanics (MM) optimization and molecular dynamics (MD) simulation. The results of single point energy, HOMO energy, and charges transfer were analyzed. The results of theoretical calculations are in good agreement with the experimental data.     

Improved relativistic energy-consistent pseudopotentials for 3d-transition metals

Energy-consistent relativistic pseudopotentials for 3d-transition metals Sc to Ni based on modified valence energies are proposed. The pseudopotentials are adjusted at the finite difference level within the intermediate coupling scheme with respect to multi-configuration Dirac–Hartree–Fock data based on the Dirac–Coulomb Hamiltonian with an estimate of the Breit contributions in quasidegenerate perturbation theory. Typically a few hundred to thousand J levels arising from about 35 to 40 configurations ranging from the anion down to the highly charged cation are considered as references. It is shown that introducing a small common energetic shift of all valence energies reduces the errors in the parameter adjustment considerably. Results of highly correlated atomic and molecular test calculations using large basis sets and basis set extrapolation techniques are presented. To be submitted to Theoretical Chemistry Accounts (special volume on the occasion of Prof. Dr. H. Stoll's 60th birthday)     

Mesoporous electrode material from alumina-stabilized anatase TiO2 for lithium ion batteries

A mesoporous electrode material whose structure is composed of anatase nanocrystals stabilized by alumina is reported. Powder X-ray diffraction shows the anatase phase only, but micro-Raman spectroscopy shows that the materials have a core-shell morphology with grains of bulk anatase covered by a thin rutile layer on the surface. This structure is unique when compared to analogous materials stabilized by zirconia (PNNL-1). Nitrogen adsorption isotherms demonstrate a monotonous increase in surface area and mesopore volume with increasing Al content. Thin film electrodes from these materials were characterized by lithium insertion electrochemistry. Cyclic voltammograms exhibit significant differences in Li accommodation in Al-free and Al-stabilized materials.     

Quantum chemical models of alkali metal hydroxide-water-dimethylsulfoxide superbasic media (MOH-H<Subscript>2</Subscript>O-DMSO,M = Li,Na, K)

Models of alkali metal hydroxide-water-dimethylsulfoxide superbasic media have been constructed using Hartree Fock and DFT (B3LYP) quantum chemical methods; the structure and energies of anion complexes are considered. The hydroxide anion in the models is stabilized as complexes of OH^?·H₂O and OH^?· 2H₂O types.     

Water soluble phosphine rhenium complexes

Reduction of [NMe₄]₂[ReBr₅(NO)] (1) with zinc in acetonitrile leads to the known trisacetonitrile compound [ReBr₂(CH₃CN)₃(NO)] (2). Attempts to turn 2 into a dihydrogen or a hydride complex applying direct reaction with H₂ or with H₂ and a base were unsuccessful. Complex 2 could be transformed into [ReBr(BF₄)mer-(CH₃CN)₃(NO)] (2a) with AgBF₄ in acetonitrile and was used as a starting material in a ligand exchange reaction with the water soluble phosphine 1,3,5-triaza-7-phosphadamantane (PTA) to obtain the complex [ReBr₂(NO)(PTA)₃] (3). When the reduction of 1 with zinc was carried out in the presence of PTA in acetonitrile, the disubstituted complex [ReBr₂(CH₃CN)(NO)(PTA)₂] (4) was formed. The olefin-coordinated rhenium complexes [ReBr₂(NO)(CH₂CH₂)(PTA)₂] (5a) and [ReBr₂(NO)(PhCHCH₂)(PTA)₂] (5b) were obtained from the reaction of 4 with the corresponding olefins. Complex 4 reacts further with NaHBEt₃ in THF to give the dihydride [ReH₂(THF)(NO)(PTA)₂] (6). In the presence of ethylene 6 is transformed into the ethyl hydride complex [ReH(CH₂CH₃)(η²-C₂H₄)(NO)(PTA)₂] (7). Complexes 6 showed catalytic activity in the hydrogenation of olefins.     

Microwave-assisted synthesis and characterization of a new soluble metal-free and metallophthalocyanines peripherally fused to four 18-membered tetrathiadiaza macrocycles

Preparation of some novel symmetrically tetrasubstituted metal-free phthalocyanine (6) and metallophthalocyanines (7-10) containing four 18-membered tetrathiadiaza macrocycles moieties on peripheral positions has been achieved by cyclotetramerization reaction of phthalonitrile derivative (5) in a multi-step reaction sequence. Metal-free phthalocyanine (6) was synthesized by microwave irradiation of 13,24-bis[(4-methylphenyl)sulfonyl]-6,7,14,15,23,24-hexahydro-13H,22H-tribenzo[b,h,n][1,4,10,13,7,16]tetrathiadiazacyclo-octadecine-18,19-dicarbonitrile (5) in 2-(dimethylamino)ethanol. The metallophthalocyanines (7-10) were prepared by the reaction of the phthalonitrile compound (5) with NiCl₂, Zn(CH₃COO)₂, CoCl₂, CuCl₂ salts, respectively, by microwave irradiation in 2-(dimethylamino)ethanol for at 175 °C, 350 W. The new compounds were characterized by IR, ¹H NMR, ¹³C NMR, UV-Vis, elemental analysis and MS spectra data.