The solvation of Li and Na in acetonitrile from ab initio-derived many-body ion–solvent potentials

Several Li⁺- and Na⁺-acetonitrile models were derived from ab initio calculations at the counterpoise-corrected MP2/TZV++(d,p) level for distorted ion-(MeCN)_n clusters with n=1, 4 and 6. Two different many-body ion-acetonitrile models were constructed: an effective three-body potential for use with the six-site effective pair model of Böhm et al., and an effective polarizable many-body model. The polarizable acetonitrile model used in the latter model is a new empirical model which was also derived in the present paper. Mainly for comparative purposes, two ion-acetonitrile pair potentials were also constructed from the ab initio cluster calculations: one pure pair potential and one effective pair potential. Using all these potential models, MD simulations in the NPT ensemble were performed for the pure acetonitrile liquid and for Li⁺(MeCN) and Na⁺(MeCN) solutions with 1 ion in 512 solvent molecules and with a simulation time of at least 120 ps per system. Thermodynamic properties, solvation-shell structure and the self-diffusion coefficient of the ions and of the solvent molecules were calculated and compared between the different models and with experimental data, where available. The Li⁺ ion is found to be four-coordinated when the new many-body potentials are used, in contrast to the six-coordinated structure obtained for the pure pair and effective pair potentials. The coordination number of Na⁺ is close to six for all the models derived here, although the coordination number becomes slightly smaller with the many-body potentials. For both ions, the solvent molecules in the first shell point their nitrogen ends towards the cation, while in the second shell the opposite orientation is the most common.     

A novel method for asymmetric synthesis of both enantiomers of α-substituted carboxylic acid derivatives from optically active 1-chlorovinyl p-tolyl sulfoxides and lithium ester enolates with 1,4-chiral induction from the sulfur chiral center

Treatment of optically active 1-chlorovinyl p-tolyl sulfoxides, which were synthesized from symmetrical ketones and (R)-(−)-chloromethyl p-tolyl sulfoxide in three steps, with lithium enolate of carboxylic acid tert-butyl esters gave optically active adducts having a substituent at the α-position with high 1,4-chiral induction from the sulfur chiral center in high yields. The adducts were converted to optically active esters and carboxylic acids having a chiral center at the α-position. When this addition reaction was carried out with the ester enolate generated from excess carboxylic acid tert-butyl ester with LDA in the presence of HMPA, the diastereomer of the adduct was obtained. By using the two reaction conditions for the generation of the ester enolates, a new method for asymmetric synthesis of both enantiomers of carboxylic acid derivatives having a substituent at the α-position from the one chiral source, (R)-(−)-chloromethyl p-tolyl sulfoxide, was realized.     

LiBF4-Catalyzed three-component coupling of an aldehyde, acetic anhydride and allyltrimethylsilane/TMSCN

Lithium tetrafluoroborate is found to be an efficient catalyst for allylation and cyanation of aldehydes with allyltrimethylsilane and trimethylsilyl cyanide in the presence of acetic anhydride at room temperature to produce homoallylic acetates and α-cyano acetates in excellent yields. A solution of 10 mol % of LiBF₄ in acetonitrile provides a convenient reaction medium to carry out allylation and cyanation reactions under very mild and neutral conditions.     

锂离子蓄电池正极材料LiFePO4研究进展

锂离子电池正极材料正在向着高比能量、长寿命、低成本、环境友好的方向发展,而具有橄榄石结构的LiFePO_4正极材料以其结构稳定、成本低、无污染等优点成为21世纪最理想的绿色电源,但自身也存在缺点。综述了锂离子电池正极材料LiFePO_4的研究进展。系统地阐述了LiFePO_4的晶体结构特征及性能、多种合成方法以及掺杂多种导电材料和控制晶体生长制备纳米粉体对材料性能的影响。对该材料的应用前景进行了展望,并提出了下一步可能的研究趋势。     

Drei Alkalimetall‐Erbium‐Thiophosphate: Von der Schichtstruktur bei KEr[P2S7] zur dreidimensionalen Vernetzung in NaEr[P2S6] und Cs3Er5[PS4]6

Three Alkali‐Metal Erbium Thiophosphates: From the Layered Structure of KEr[P₂S₇] to the Three‐Dimensional Cross‐Linkage in NaEr[P₂S₆] and Cs₃Er₅[PS₄]₆ The three alkali‐metal erbium thiophosphates NaEr[P₂S₆], KEr[P₂S₇], and Cs₃Er₅[PS₄] show a small selection of the broad variety of thiophosphate units: from ortho‐thiophosphate [PS₄]^3? and pyro‐thiophosphate [S₃P–S–PS₃]^4? with phosphorus in the oxidation state +V to the [S₃P–PS₃]^3? anion with a phosphorus‐phosphorus bond (d(P–P) = 221 pm) and tetravalent phosphorus. In spite of all differences, a whole string of structural communities can be shown, in particular for coordination and three‐dimensional linkage as well as for the phosphorus‐sulfur distances (d(P–S) = 200 – 213 pm). So all three compounds exhibit eightfold coordinated Er³⁺ cations and comparably high‐coordinated alkali‐metal cations (CN(Na⁺) = 8, CN(K⁺) = 9+1, and CN(Cs⁺) ≈ 10). NaEr[P₂S₆] crystallizes triclinically ( ; a = 685.72(5), b = 707.86(5), c = 910.98(7) pm, α = 87.423(4), β = 87.635(4), γ = 88.157(4)°; Z = 2) in the shape of rods, as well as monoclinic KEr[P₂S₇] (P2₁/c; a = 950.48(7), b = 1223.06(9), c = 894.21(6) pm, β = 90.132(4)°; Z = 4). The crystal structure of Cs₃Er₅[PS₄] can also be described monoclinically (C2/c; a = 1597.74(11), b = 1295.03(9), c = 2065.26(15) pm, β = 103.278(4)°; Z = 4), but it emerges as irregular bricks. All crystals show the common pale pink colour typical for transparent erbium(III) compounds.     

Charge compensation and oxidation in NaxCoO2−δ and LixCoO2−δ studied by XANES

A comparative study on the oxidation and charge compensation in the A_xCoO_2−δ systems, A=Na (x=0.75, 0.47, 0.36, 0.12) and Li (x=1, 0.49, 0.05), using X-ray absorption spectroscopy at O 1s and Co 2p edges is reported. Both the O 1s and Co 2p XANES results show that upon removal of alkali metal from A_xCoO_2−δ the valence of cobalt increases more in Li_xCoO_2−δ than in Na_xCoO_2−δ. In addition, the data of O 1s XANES indicate that charge compensation by oxygen is more pronounced in Na_xCoO_2−δ than in Li_xCoO_2−δ.     

Determination of lithium in pharmaceutical formulations used in the treatment of bipolar disorder by flow injection analysis with spectrophotometric detection

In this work, a flow injection system with spectrophotometric detection was developed for the determination of lithium in pharmaceutical formulations used in the treatment of bipolar disorder. Reaction between Quinizarine (1,4-dihydroxyanthraquinone) and Li(I) ion in alkaline medium containing dimethylsulfoxide (DMSO) was explored for this purpose. The flow system was optimized regarding to its chemical (DMSO, Quinizarine and NaOH concentrations and sample pH) and physical parameters (sample loop volume, carrier flow rate and reactor length) in order to establish better conditions in terms of sensitivity and sampling frequency. The results obtained showed that the concentration of DMSO in the reagent solution presents remarkable influence on the magnitude of analytical signal. Chemical species that could be found in the formulations such as Na(I), K(I), Mg(II), Ca(II), Ti(IV), Cl⁻, CO₃²⁻ e sodium dodecylsulfate were tested as possible interfering ions. Among them, only non-monovalent cations presented noticeable interference on lithium signal. However, they were not found in concentrations high enough to cause interference in the determination of lithium in the samples. Sample preparation was performed by sonicating a slurry prepared by dispersing 100 mg of powdered sample in 15 mL of 0.10 mol L⁻¹ HCl solution. Results obtained by developed methodology were not statistically different from those obtained by flame emission spectrometry. In the optimized conditions the method presented a linear range of 5-40 mg L⁻¹ and a relative standard deviation of 3.6% at 5 mg L⁻¹ Li concentration. Detection and quantification limits were 0.54 and 1.8 mg L⁻¹, respectively. Sampling frequency, calculated as the time interval passed between two consecutive injections, was 60 samples per hour. The methodology was successfully applied in the determination of lithium in three commercial samples.     

ViscosityB-coefficients for lithium perchlorate in ethylene glycol-water mixtures

Viscosities and densities of lithium perchlorate solutions in different ethylene glycol-water compositions have been measured at 25.0 and 35.0 °C. From these data, the correspondingB-coefficients of theJones-Dole equation have been determined. TheB-value depends on the solvent composition and it reaches a maximum in the water-rich region. This behaviour is analysed in terms of ionic solvation and solvent structure.

---

Viskositäts-B-Koeffizienten für Lösungen von Lithiumperchlorat in Ethylenglykol-Wasser-Mischungen

Zusammenfassung Es wurden die Dichten und Viskositäten für Lösungen von Lithiumperchlorat in verschieden zusammengesetzten Ethylenglykol-Wasser-Mischungen bei 25 °C und 35 °C gemessen. Auf Grund der erhaltenen Daten wurden dieB-Koeffizienten in den entsprechendenJones-Dole-Gleichungen für die relative Viskosität bestimmt. DieB-Werte hängen von der Zusammensetzung des Lösungsmittels ab und erreichen im wasserreichen Konzentrationsgebiet ein Maximum. Dieses Verhalten wird in Hinblick auf die Ionensolvatation und die Struktur des Lösungsmittels analysiert.

     

Asymmetric Reduction Using Lithium Aluminum Hydride Modified with Chiral Ligands Prepared from (1R)-(-)-β-Pinene

The reduction of prochiral ketones using chiral reducing reagents, prepared from lithium aluminum hydride and (-)-(1R, 2S, 3S, 5R)-10-anilinopinanediol (5) and (-)-(1R, 2S, 3S, 5R)-10-N-methylanilinopinanediol (6), affords chiral secondary alcohols in useful chemical yields (70 ～ 93%) but in low optical purity (8 ～ 33% ee). Modifiers 5 and 6 are synthesized from (lR)-(-)-β-pinene in three steps.