New regularities and an equation of state for liquids

Three regularities have been introduced for liquids (T < T_C and ρ > ρ_C) based on average potential energy. The experimental data have been used to show the validity of the regularities. First, there exists near-linearity relation between and ρ for all isotherms of a liquid, where P_i and ρ are internal pressure and density, respectively. Second, changes linearly with ρ for each isotherm of any liquid, where Z and V_m are compressibility factor and molar volume, respectively. Third, a new regularity using the definition of bulk modulus and our new equation of state between reduced bulk modulus and density has been introduced, that is versus ρ must be linear for all isotherms of a liquid where B_r is the reduced bulk modulus.

A new equation of state has been also derived. The density of some liquids in the extensive ranges of temperature and pressure has been calculated using the new equation of state. The densities calculated from this equation agree with experiment to better than 0.3%. The new equation of state can predict internal pressure, thermal expansion coefficient, and isothermal compressibility of liquids within experimental error.     

Multistage polar switching in bent-core mesogens

We report a novel type of electro-optical switching in a tilted smectic phase of bent-shaped mesogens. The switching consists of a continuous stage and two bistable transitions. Detailed optical and electro-optical measurements using high-speed imaging are given and possible interpretations of the experimental results are discussed.     

Switching of banana liquid crystal mesophases under field

Taking advantage of the great number of bent-core or “banana" compounds synthesized and studied in the laboratory, we describe their behaviour under the application of an external electric field. If the field were a static one, we would work within the frame of an equilibrium phase diagram in a (field E, temperature T) space where some phases would be simple dielectrics and others ferroelectric ones with a macroscopic polarization, either spontaneous or induced by the field. In this paper, we deal with the basic responses of “banana” liquid crystals under the application of a low frequency (1 to 100 Hz) AC field. Firstly square-wave voltages allow us to locate the phase boundary between dielectric (at lower field) and ferroelectric phases (higher field) at a given temperature and field threshold. Then we apply slowly varying AC voltages with shapes like triangle or “triple-plateau” to check out the stability of the induced ferroelectric phase versus field removal. Three behaviours are encountered, the unstable one (short lifetime of the high-field ferroelectric phase) where the macroscopic polarization is destroyed and then rebuilt in the opposite direction during each half period and usually called “antiferroelectric”; the stable one (long lifetime) with a polarization that rotates at constant modulus which is labeled as “ferroelectric” and a new one where the macroscopic polarization is proportional to the applied fied, we named this behaviour as “superparaelectric”. Let us stress that these observations apply to the ferroelectric phases of the (E, T) phase diagram not to the zero field (0,T) phases observed in the usual phase characterization experiments except for an eventual spontaneous ferroelectric phase. Received 18 April 2002 and Received in final form 17 January 2003 Published online: 16 April 2003 RID="a" ID="a"e-mail: marcerou@crpp.u-bordeaux.fr RID="b" ID="b"URL: http://www.crpp-bordeaux.cnrs.fr     

Combined use of β-cyclodextrin and ionic liquid as electrolyte additives in EKC for separation and determination of carob's phenolics—A study of the synergistic effect

In this work, a simple, reliable, and fast capillary electrophoretic method was developed and validated for the simultaneous determination of 12 polyphenolic compounds, the most frequently found in carob's pulp and seeds. The present work deals with the development of a novel dual electrophoretic system based on the combined use of β-CD and ionic liquid (IL) as buffer additives. A baseline separation of the target analytes was achieved in less than 10 min by using a BGE consisting of 35 mM borate along with 15 mM β-CD and 3 mM l -alanine tert butyl ester lactate (l -AlaC₄Lac) IL as buffer additives at pH 9.5, a temperature of 25°C, and an applied voltage of 30 kV. The application of the developed electrophoretic method to real samples enabled the identification and quantification of the main phenolic constituents of both ripe and unripe carob pulp extracts. The results revealed the predominance of gallic acid in both ripe (183.92 μg/g carob pulp) and unripe (205.10 μg/g carob pulp) carob pulp and highlighted the great influence of the ripening stage on carobs polyphenolic composition, with unripe pods being more enriched in polyphenols (total phenolics detected: 912.58 and 283.13 μg/g unripe and ripe carob pulp).     

Recent progress in the determination of solid surface tensions from contact angles

Advancing contact angles of different liquids measured on the same solid surface fall very close to a smooth curve when plotted as a function of liquid surface tension, i.e., gamma(lv)costheta versus gamma(lv). Changing the solid surface, and hence gamma(sv), shifts the curve in a regular manner. These patterns suggest that gamma(lv)costheta depends only on gamma(lv) and gamma(sv). Thus, an "equation of state for the interfacial tensions" was developed to facilitate the determination of solid surface tensions from contact angles in conjunction with Young's equation. However, a close examination of the smooth curves showed that contact angles typically show a scatter of 1-3 degrees around the curves. The existence of the deviations introduces an element of uncertainty in the determination of solid surface tensions. Establishing that (i) contact angles are exclusively a material property of the coating polymer and do not depend on experimental procedures and that (ii) contact angle measurements with a sophisticated methodology, axisymmetric drop shape analysis (ADSA), are highly reproducible guarantees that the deviations are not experimental errors and must have physical causes. The contact angles of a large number of liquids on the films of four different fluoropolymers were studied to identify the causes of the deviations. Specific molecular interactions at solid-vapor and/or solid-liquid interfaces account for the minor contact angle deviations. Such interactions take place in different ways. Adsorption of vapor of the test liquid onto the solid surface is apparently the only process that influences the solid-vapor interfacial tension (gamma(sv)). The molecular interactions taking place at the solid-liquid interface are more diverse and complicated. Parallel alignment of liquid molecules at the solid surface, reorganization of liquid molecules at the solid-liquid interface, change in the configuration of polymer chains due to contact with certain probe liquids, and intermolecular interactions between solid and liquid molecules cause the solid-liquid interfacial (gamma(sl)) tension to be different from that predicted by the equation of state, i.e., gamma(sl) is not a precise function of gamma(lv) and gamma(sv). In other words, the experimental contact angles deviate from the "ideal" contact angle pattern. Specific criteria are proposed to identify probe liquids which eliminate specific molecular interactions. Octamethylcyclotetrasiloxane (OMCTS) and decamethylcyclopentasiloxane (DMCPS) are shown to meet those criteria, and therefore are the most suitable liquids to characterize surface tensions of low energy fluoropolymer films with an accuracy of +/-0.2 mJ/m2.     

离子液体催化苯与环己烯的Friedel-Crafts烷基化反应

室温离子液体是由特定的阳离子和阴离子构成,具有独特的性质和功能。将路易斯酸型离子液体应用于苯和环己烯的烷基化反应,考察了苯与环己烯摩尔比、反应温度、反应时间对烷基化反应产物收率的影响。结果表明以制备的咪唑盐离子液体为催化剂,在反应温度80℃、反应时间1.0h、苯烯摩尔比8：1的条件下,所得环己基苯的产物收率最高,为86.75%。离子液体可重复使用,活性基本没有降低。     

Wetting in the nanoscale: a continuum mechanics approach

A continuum mechanics model has been developed to study the equilibrium shape of nanometric droplets on a planar solid substrate and how, in this scale, the contact angle depends on the drop size. The drop is modeled as a liquid volume enclosed in an inextensible membrane, subject to an isotropic tension (the surface tension) and to a field of surface forces including, in the proximity of the solid, the liquid-to-solid interactions, envisaged as a generic potential force per unit surface directed normally to the solid surface (i.e. vertically). The only conditions required to solve the problem are those of mechanical and thermodynamic equilibrium. The predictions of the model are discussed in comparison with data on nanodrops retrieved by a special AFM device for a number of different liquid–solid systems.     

Thermo- and Photocatalytic Activation of CO2 in Ionic Liquids Nanodomains

Ionic liquids (ILs) are considered to be potential material devices for CO₂ capturing and conversion to energy-adducts. They form a cage (confined-space) around the catalyst providing an ionic nano-container environment which serves as physical-chemical barrier that selectively controls the diffusion of reactants, intermediates, and products to the catalytic active sites via their hydrophobicity and contact ion pairs. Hence, the electronic properties of the catalysts in ILs can be tuned by the proper choice of the IL-cations and anions that strongly influence the residence time/diffusion of the reactants, intermediates, and products in the nano-environment. On the other hand, ILs provide driving force towards photocatalytic redox process to increase the CO₂ photoreduction. By combining ILs with the semiconductor, unique solid semiconductor-liquid commodities are generated that can lower the CO₂ activation energy barrier by modulating the electronic properties of the semiconductor surface. This mini-review provides a brief overview of the recent advances in IL assisted thermal conversion of CO₂ to hydrocarbons, formic acid, methanol, dimethyl carbonate, and cyclic carbonates as well as its photo-conversion to solar fuels.     

Concentrated Ionic Fluids: Is There a Difference Between Chloride-Based Brines and Deep Eutectic Solvents?

Deep Eutectic Solvents (DESs) have been lauded as novel solvents, but is there really a difference between them and concentrated aqueous brines? They provide a method of adjusting the activity of water and chloride ions which can affect mass transport, speciation and reactivity. This study proposes a continuum of properties across concentrated ionic fluids and uses metal processing as an example. Charge transport is shown to be governed by fluidity and there is no discontinuity between molar conductivity and fluidity irrespective of cation, charge density or ionic radius. Diffusion coefficients of iron(III) and copper(II) chloride in numerous concentrated ionic fluids show the same linear correlation between diffusion coefficient and fluidity. These oxidising agents were used to etch copper, silver and nickel and while the etching rate increased with fluidity for copper, etching of silver and nickel only occurred at high chloride and low water activity as passivation occurred when water activity increased. Overall, brines provide a high chloride content at a lower viscosity than DESs, but unlike DESs, brines are unable to prevent passivation due to their high water content. The results show how selective etching of mixed metal waste streams can be achieved by tuning chloride and water activity.