Specific Uphill Transport of Zinc as Zn(SCN)42− Ion using Na+-Dicyclohexyl-18-Crown-6 as Carrier

Sodium-dicyclohexyl- 18-crown-6 complex cation was used as carrier for the uphill transport of zinc as Zn(SCN)₄^2? complex anion. By using L-cysteine as a metal ion acceptor in the receiving phase at the optimized pH of 7.6, the amount of zinc transport through the liquid membrane after 90 min was 97.2 ± 1.0%. The selectivity and efficiency of zinc transport from aqueous solutions containing equimolar mixtures of Ag⁺, Cd²⁺ Co²⁺, Cu²⁺, Fe²⁺, Ni²⁺, Pb²⁺, Pd²⁺, Sr²⁺, Bi³⁺, Cr³⁺ and Fe³⁺ ions was investigated. In the presence of NH₂OH.HCl as a suitable masking agent in the source phase, the interfering effect of Cu²⁺ and Pb²⁺ ions was diminished drastically.     

Use of cotton as a sorbent for on-line precolumn enrichment of polycyclic aromatic hydrocarbons in waters prior to liquid chromatography determination

Using cotton as a solid-phase extraction sorbent of the precolumn, an on-line coupled precolumn preconcentration-liquid chromatography system with fluorescence detection was developed for the determination of PAHs in aqueous samples. Four PAHs including fluorene, phenanthrene, fluoranthene and benzo[k]fluoranthene were preconcentrated by a precolumn packed with 30 mg of absorbent cotton and then separated by C₁₈ analytical column. When 100 ml of sample was enriched, the proposed procedure provided detection limits in the range of 0.5-57 ng l⁻¹. Several water samples spiked with PAHs were analyzed with recoveries in the range of 92-119% at spiking level of 100 ng l⁻¹ for fluorene, phenanthrene and fluoranthene, and 10 ng l⁻¹ for benzo[k]fluoranthene, respectively.     

As12Se44—: ein neuartiges Selenoarsenatanion mit einem Polyarsenkäfig in der Verbindung [Co(NH3)6]2As12Se4 · 12 NH3

As₁₂Se₄^4—: a New Selenoarsenate Anion with a Polyarsenic Cage in the Compound [Co(NH₃)₆]₂As₁₂Se₄ · 12 NH₃ Orange coloured crystals of [Co(NH₃)₆]₂As₁₂Se₄ · 12 NH₃ were prepared by the reduction of As₄Se₄ with a solution of sodium in liquid ammonia and subsequent precipitation with CoBr₂. The X‐ray structure determination shows them to contain the selenoarsenate anion As₁₂Se₄^4—, which consists of a central As₁₂‐cage with four exo‐bonded, formally negatively charged Se atoms. The structure of the As₁₂‐cage is equivalent to the main polyphosphorus building unit of a known organopolyphosphane and of tubular P₁₂ in the compound (CuI)₃P₁₂.     

Loss and recovery in hydrophobicity of silicone rubber exposed to corona discharge

This paper describes the loss and recovery in the hydrophobicity of unfilled high temperature vulcanized silicone rubber (HTV-SR) resulting from corona discharge. In this study, HTV-SR specimens were exposed to corona stress generated by a parallel needle-plane electrode system, and physicochemical analyses on the surface layer of SR before and after corona discharge treatment were carried out by using Fourier transform infra-red (FTIR) spectroscopy, scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). It is demonstrated that hydrophilic OH groups that are by-products of ageing can be formed instead of hydrophobic CH₃ groups on the surface of aged SR and the corona discharge plays an important role on the temporary loss of hydrophobicity. After a substantial period of ‘rest’, the hydrophobic recovery of SR results from the diffusion of low-molecular weight (LMW) silicone fluid from the bulk onto the aged layer.     

Immunoaffinity-based extraction of phenylurea herbicides using mixed antibodies against isoproturon and chlortoluron

Summary The analysis of several phenylurea herbicides in different waters is described using an immunoaffinity column clean-up and determination by high performance liquid chromatography. The pesticides were selectively retained on a solid phase extraction column containing antibodies to chlortoluron and to isoproturon immobilised onto silica. Selected phenylureas were eluted using a simple phosphate buffered saline/ethanol mixture at low pH. The immunoaffinity approach gave extracts free of interfering substances and allowed detection limits comparable to those required for pesticides in water in the European Community. The proposed method was successfully applied to the determination of chlortoluron, isoproturon, linuron and chlorbromuron in tap and river water. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

液晶聚酯与环氧嵌段共聚物的合成及表征

近年来 ,人们利用高分子液晶作为热固性环氧树脂的改性剂 ,不仅可以提高环氧树脂的韧性和强度 ,而且可以改善其热性能 ,为制备高性能的环氧树脂提供了一条新的途径[1,2 ] .目前报道所使用的液晶聚合物大多为液晶聚酯[3 ] 或液晶性聚氨酯[4] ,这些液晶聚合物与环氧树脂由于存在相容性不好的问题 ,给其实际应用带来了困难 .为了改善二者的相容性 ,本文采用溶液法合成了末端带有反应活性基团的聚酯型液晶聚合物 ,将它再与双酚Ａ环氧预聚物反应 ,制得了高分子液晶环氧嵌段共聚物 ,其合成路线如下 :2ＨＯＣＯＯＣＨ3+ ＨＯ(ＣＨ2 ) 6 ＯＨ　　Ｈ…     

Simultaneous determination of radionuclides separable into natural decay series by use of time-interval analysis

A delayed coincidence method, time-interval analysis (TIA), has been applied to successive – decay events on the millisecond time-scale. Such decay events are part of the ²²⁰Rn²¹⁶Po (T_1/2 145 ms) (Th-series) and ²¹⁹Rn²¹⁵Po (T_1/2 1.78 ms) (Ac-series). By using TIA in addition to measurement of ²²⁶Ra (U-series) from -spectrometry by liquid scintillation counting (LSC), two natural decay series could be identified and separated. The TIA detection efficiency was improved by using the pulse-shape discrimination technique (PSD) to reject -pulses, by solvent extraction of Ra combined with simple chemical separation, and by purging the scintillation solution with dry N₂ gas. The U- and Th-series together with the Ac-series were determined, respectively, from alpha spectra and TIA carried out immediately after Ra-extraction. Using the ²²¹Fr²¹⁷At (T_1/2 32.3 ms) decay process as a tracer, overall yields were estimated from application of TIA to the ²²⁵Ra (Np-decay series) at the time of maximum growth. The present method has proven useful for simultaneous determination of three radioactive decay series in environmental samples.     

An experimental method for testing the solvophobic theory by using graphitized carbon black in GC and LC

Summary The net solvent effect for several solute-solvent pairs has been calculated by using the solvophobic approach for describing the liquid chromatographic process. For the same solutes and solvents the net solvent effect has been experimentally measured by using graphitized carbon black columns in GC and HPLC. A comparison between the measured and calculated values made in terms of normalized free energy changes, indicates that the solvophobic theory is fairly adequate for predicting the sequence of solvent strength and provides a comprehensive explanation of the various interactions occurring in reversed-phase LC. A critical discussion of the deviations of the theory from the experimental data is also presented.Presented at the 14th International Symposium on Chromatography London, September, 1982     

高抗冲聚苯乙烯的增韧机理

概述了以高抗冲聚苯乙烯（ＨＩＰＳ）为中心的有关橡胶增韧机理的理论，并且总结了界面，性能、粒子尺寸、粒 距及缠结密度等因素对橡胶／高分子共混体系性能的影响。     

Dependence of mechanical and aging properties of chloroprene rubber on silica and ethylene thiourea loadings

The interaction between precipitated silica and chloroprene rubber (CR) was investigated using a nuclear magnetic resonance (NMR) technique. The results reveal that the silanol groups on silica surface could chemically react with CR. Crosslinking of CR is therefore possible in the presence of silica at high temperature. The effects of silica and ethylene thiourea (ETU) loadings on properties of the silica-filled CR were thereafter investigated. With increasing silica loading, the compound viscosity increases considerably due to the dilution effect. As silica could act as a curative for CR, increasing silica loading results in both faster cure rate and increased crosslink density. The optimum tensile strength is found at approximately 30 phr of silica loading. The results also show that silica loading has little effect on most aging properties, except the relative modulus in which it increases rapidly with increasing silica loading due to the post curing effect. Similar to the effect of silica loading, the compound viscosity, cure rate and crosslink density are all increased with increasing ETU loading. The tensile strength is, on the other hand, slightly affected by ETU loading. Exception is found at high loading where the tensile strength drops noticeably. Interestingly, aging resistance of the vulcanizate is found to improve with the addition of ETU. Explanation is given by the hindrance capability of ETU to post curing.