Development of hollow fiber‐supported liquid‐phase microextraction and HPLC‐DAD method for the determination of pyrethroid metabolites in human and rat urine

A simple hollow fiber liquid‐phase microextraction method for the determination of synthetic pyrethroid metabolites, 3‐phenoxybenzoic acid and 4‐hydroxy‐3‐phenoxybenzoic acid, in human and rat urine was developed and validated. A polypropylene hollow fiber tightly fitted onto a Nylon rod and impregnated with organic solvent served as a disposable extraction device. Desorption of analytes was carried out in NaOH solution, analyzed further by gradient HPLC and diode array detection method. Important factors were identified using Taguchi OA16 (4⁵) orthogonal array design and further optimized using univariate approach. The optimum method performance was observed when 1 mL of urine hydrolyzed with 0.2 mL of concentrated HCl was further supplemented with 100 mg of NaCl and extracted for 120 min into dihexyl ether immobilized in the pores of the hollow fiber. Metabolites were desorbed into 0.1 mL of 0.1 M NaOH for another 120 min. Limits of detection and quantitation of 15 and 50 ng/mL were obtained for both analytes. Relative standard deviations of 1.6–12.6% over the linear range (50–10,000 ng/mL, r > 0.9906) were observed. Intra‐ and inter‐day accuracies of the method ranged from 98.3 to 109.5% and from 93.3 to 110.9%, respectively. The optimized method was applied to the analysis of real urine samples collected from rats exposed orally to cypermethrin. Copyright © 2013 John Wiley & Sons, Ltd.     

Detection of stress whitening in plastics with the help of X-ray dark field imaging

The processing of thermoplastics can induce a wide range of defects such as stress whitening, cavitation and porosity, which can adversely affect the reliability of the final products. Hence, fast and effective non-destructive detection methods for such defects are highly important for quality assurance on production lines. In this paper, X-ray dark field imaging is presented as a new non-destructive testing method that allows the visualization of stress whitening or cavitation efficiently. The performance of the method is demonstrated for the case of an injection-moulded polyvinylidene fluoride part that exhibits stress whitening. Whereas the stress whitening could not be detected by conventional X-ray imaging, it was localized by an X-ray dark field image acquired within a few minutes. Once the precise location of the stress whitening was known, it was possible to verify the result by local micro X-ray computed tomography and by a micro section image.     

Biaxial nematics: symmetries,order domains and field-induced phase transitions †

We studied the symmetry and spatial uniformity of the orientational order of the biaxial nematic phase in the light of recent experimental observations of phase biaxiality in thermotropic bent-core and calamitic-tetramer nematics. Evidence is presented supporting monoclinic symmetry, instead of the usually assumed orthorhombic symmetry. The use of deuterium nuclear magnetic resonance to differentiate between the possible symmetries is described. The spatial aspects of biaxial order are presented in the context of the cluster model, wherein macroscopic biaxiality can result from the field-induced alignment of biaxial and possibly polar domains. The implications of different symmetries on the alignment of biaxial nematics and on the measurements of biaxial order are discussed in conjunction with the microdomain structure of the biaxial phase.     

The intersection marker method for 3D interface tracking of deformable surfaces in finite volumes

Currently, the majority of computational fluid dynamics (CFD) codes use the finite volume method to spatially discretise the computational domain, sometimes as an array of cubic control volumes. The Finite volume method works well with single‐phase flow simulations, but two‐phase flow simulations are more challenging because of the need to track the surface interface traversing and deforming within the 3D grid. Surface area and volume fraction details of each interface cell must be accurately accounted for, in order to calculate for the momentum exchange and rates of heat and mass transfer across the interface. To attain a higher accuracy in two‐phase flow CFD calculations, the intersection marker (ISM) method is developed. The ISM method is a hybrid Lagrangian–Eulerian front‐tracking algorithm that can model an arbitrary 3D surface within an array of cubic control volumes. The ISM method has a cell‐by‐cell remeshing capability that is volume conservative and is suitable for the tracking of complex interface deformation in transient two‐phase CFD simulations. Copyright © 2015 John Wiley & Sons, Ltd.     

Attainment of Emulsions with Liquid Crystal from Marigold Oil Using the Required HLB Method

Development of new formulations for topical use and cosmetic and pharmaceutical delivery agents has increased the complexity of emulsified systems. Liquid crystals, known since the nineteenth century are the third phase of an emulsion, being responsible for increasing its stability and the solubility of substances poorly soluble in water, or the oily phase, modulating the release of drugs imprisoned in its structure and promoting hydration of the skin surface. In the present work we developed oil/water emulsions, making use of Marigold oil (Calendula officinalis L) and ethoxylated fat alcohols as surfactant. The required HLB value for marigold oil was determined to be 6.0. The surfactants were associated in lipophilic/hydrophilic pairs. The lipophilic surfactants were Ceteth‐2 and Steareth‐2 and the hydrophilic surfactants were Steareth‐20, Ceteareth‐20, Ceteareth‐5, and Ceteth‐10. To identify the liquid crystalline phases, the emulsions were analyzed by polarized light microscopy. The physical stability was evaluated by rheology and zeta potential analysis. All emulsions presented lamellar liquid crystal structures. Results showed that this type of surfactant is able to produce liquid crystal in the system, with slight difference in appearance, influencing the physical stability, according to the methods applied.     

Thinking machines

We propose that a sufficiently advanced civilisation may employ Cepheid variable stars as beacons to transmit all-call information throughout the galaxy and beyond. They might employ a pulsed neutrino beam to trigger the expansion of a Cepheid at an earlier than normal time, generating a binary signature of normal period or artificially shortened period. One can construct many scenarios wherein it would be desirable for such a civilisation of star ticklers to transmit data to anyone else within viewing range. The beauty of employing Cepheids is that these stars can be seen from afar (we monitor them out through the Virgo cluster), and any developing technological society would seem to be likely to closely observe them as distance markers. Records exist of Cepheids for well over 100 years. We propose that these (and other regularly variable types of stars) be searched for signs of phase modulation (in the regime of short pulse duration) and patterns, which could be indicative of intentional signalling.     

Study of the purifying affects of thermal annealing for polymer‐wall liquid crystal cells

The thermal annealing process was proposed to purify the pixel regions of a liquid crystal (LC) cell with polymer walls. This technique, based on thermal‐induced phase separation, successfully evicts the residual monomers from the LC volume and significantly improves electro‐optical properties of the polymer‐wall LC devices. The influence of the annealing process on the purity of LC‐rich domain and the electro‐optic properties of a LC cell was explored with a series of experiments. According to the experimental results, the annealing technique is extremely prospective for constructing flexible polymer‐wall LC display applications.     

Stroboscopic microscopy—direct imaging of structure development and phase separation during spin‐coating

Spin‐coated polymer blends possess a rich variety of accessible non‐equilibrium morphologies, formed through a process of phase separation and self‐assembly, the complexities of which remain incompletely understood. The technique of stroboscopic microscopy has now been developed to allow direct observations of microscopic and mesoscopic morphological development during spin‐coating and has afforded unequivocal information regarding morphological development. The technique so far has three modes of operation providing information on topographical, compositional, and crystal development. In this review, we look at the technique's development, its applications and comment on the future potential for this technique. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 17–25     

Solvent selection in ultrasonic-assisted emulsification microextraction: Comparison between high- and low-density solvents by means of novel type of extraction vessel

There are numerous published reports about dispersive liquid phase microextraction of the wide range of substances, however, till now no broadly accepted systematic and purpose oriented selection of extraction solvent has been proposed. Most works deal with the optimization of available solvents without adequate pre-consideration of properness. In this study, it is tried to compare the performances of low- and high-density solvents at the same conditions by means of novel type of extraction vessel with head and bottom conical shape. Extraction efficiencies of seven basic pharmaceutical compounds using eighteen common organic solvents were studied in this work. It was much easier to work with high-density solvents and they mostly showed better performances. This work shows that although exact predicting the performance of the solvents is multifaceted case but the pre-consideration of initial selection of solvents with attention to the physiochemical properties of the desired analytes is feasible and promising. Finally, the practicality of the method for extraction from urine and plasma samples was investigated.