Functionalized Self-Assembled Monolayers on Gold as Binding Matrices for the Screening of Antibody-Antigen Interactions

Two different types of -substituted alkanethiol/disulfide compounds have been used to prepare monolayer architectures on gold serving as platforms for the immobilization of receptor probe molecules – antibodies. These are: (i) carboxylic acid alkanethiols post-reacted with amino biotin to generate streptavidin surfaces, and (ii) N-hydroxysuccinimide-terminated disulfide surfaces. The properties of the monolayers, with and without attached receptor probe molecules, were analysed using infrared spectroscopy, ellipsometry, fluorescence scanning and atomic force microscopy. Several experimental parameters, such as condensation reagents, additives, probe and target concentrations and immobilization time, were systematically varied to determine the dynamic range and to optimize the sensitivity and signal-to-noise ratio of the biochip platforms. Fluorescence screening using Cy5-labelled antigens finally demonstrated that both surfaces could be successfully employed to immobilize the antibodies. The pros and cons of the two approaches are also discussed.Received November 15, 2002; accepted March 25, 2003 Published online July 28, 2003     

Incorporation of lipid domains in Cerasome, a morphologically-stable organic-inorganic vesicular nanohybrid

To extend the concept of the Cerasome, an organic-inorganic vesicular nanohybrid, this paper investigates the preparation and characterization of a “mixed” Cerasome. The system consists of a Cerasome-forming lipid 1, a cationic synthetic lipid 2, and a zwitterionic phospholipid 3. Lipid mixtures of 1 and 2 or 1 and 3 were used to prepare the mixed Cerasomes. Their lipid distributions were examined using differential scanning calorimetry (DSC), which showed that 1 and 2 (or 1 and 3) were phase-separated in the mixed Cerasomes. These results seem to be mainly attributable to the polymerizable nature of 1. Results of scanning electron microscopy (SEM) and energy-dispersive X-ray analysis (EDX) showed that 1 and 3 were both incorporated into a single Cerasome, not macroscopically separated to form separate vesicles from each lipid component. Mixed Cerasomes of 1 and 2 showed high morphological stability against a membrane-solubilizing surfactant, incorporating up to 70% of 2. On the other hand, the mixed Cerasomes from 1 and 3 were less stable than the mixed Cerasomes from 1 and 2. This relative instability might be attributable to differences between the mixed Cerasomes from 1 and 2 and 1 and 3 in terms of their vesicular sizes, lipid domain sizes, and their relative effectiveness for siloxane network formation. These results strongly support the formation of mixed Cerasomes that have lipid domains in-plane. Systems described in this study are useful to prepare variously mixed Cerasomes that have different surface functionalities and in-plane lipid distribution, but which have high morphological stability.     

Self-organization of polymer particles on hydrophobic solid substrates in aqueous media. I. Self-organization of cationic polymer particles on alkylated glass plates

Monodisperse, cationic polymer particles bearing quaternary ammonium groups effectively self-organized on hydrophobic solid substrates such as alkylated glass plates and polymer films to form particle monolayers. With an increase of the particle surface charge density, the surface coverage decreased and the morphology of particle monolayers changed from aggregated type to dispersed type. The dispersed type of particle monolayers having a relatively regular particle distance was formed at higher temperature. The self-organization behaviors on alkylated glass plates were different from those on unmodified glass plates through electrostatic interaction. The formation of particle monolayers on alkylated glass plates occurred only over a certain latex concentration range in contrast with that on unmodified glass plate. The adhesive strength of particle monolayers was enhanced by annealing at temperatures above the glass transition temperature (T _g) of the particles. Lens-shaped particle monolayers were fabricated by annealing the dispersed type of particle monolayers.     

Molecular Dynamics Simulation of the Self-assembled Monolayers of 1-Adamantanethiolate and Its Derivatives on Au（111） Surfaces

The self-assembled monolayers （SAMs） of 1-adamantanethiolate and its derivatives on Au（111） surface were investigated. Density functional theory （DFT） calculation indicates that the most stable configuration for absorption is at the face centered cubic （fcc）-bridge site. Canonical ensemble molecular dynamics （MD） simulations were carried out to study the structures and energies of the SAMs. The ordered structures of the SAMs were analyzed by means of radial distribution function and the relative stability of the SAMs was compared. It was concluded by the comparison of various contributions to the SAM formation energy that the formation of the SAMs was determined by the intermolecular nonbonding interaction and the chemical bonding interaction of sulfur and gold.     

Electrochemical behavior and determination of epinephrine at a mercaptoacetic acid self-assembled gold electrode

The electrochemical behavior of epinephrine (EP) at a mercaptoacetic acid (MAA) self-assembled monolayer modified gold electrode was studied. The MAA/Au electrode is demonstrated to promote the electrochemical response of epinephrine by cyclic voltammetry. The possible reaction mechanism is also discussed. The diffusion coefficient D of EP is 6.85 × 10⁻⁶ cm² s⁻¹. In 0.1 mol L⁻¹ phosphate buffer (pH 7.20), a sensitive oxidation peak was observed at 0.177 V, and the peak current is proportional to the concentration of EP in the range of 1.0 × 10⁻⁵–2.0 × 10⁻⁴ mol L⁻¹ and 1.0 × 10⁻⁷–1.0 × 10⁻⁶ mol L⁻¹. The detection limit is 5 × 10⁻⁸ mol L⁻¹. The modified electrode is highly stable and can be applied to the determination of EP in practical injection samples. The method is simple, quick, sensitive and accurate.     

Detection of antisperm antibody in human serum using a piezoelectric immunosensor based on mixed self-assembled monolayers

A novel piezoelectric immunosensor based on mixed self-assembled monolayers (mixed SAMs) formed by short-chain amine- and carboxyl-terminated thiols has been developed to immobilize antigens onto gold electrodes for detecting antisperm antibody (AsAb) in human serum samples. The properties and the enhanced performance of the affinity biosensor interface based on mixed SAMs are investigated. Most importantly, analytical results of several human serum samples using the developed technique are in satisfactory agreement with those given by the enzyme-linked immunosorbent assay (ELISA) method in the concentration ranging from 32.3 to 300.0 mU/ml. It means the procedure proposed in this paper is likely to have a great potential in research and may play an important clinical role in a few years later.     

Properties of monolayers of crown ethers bearing an azo and azoxy group in the macrocycle

Two methods are described for preparing monomolecular layers of crown ethers with an azo or azoxy group in the macrocycle. When the molecules used to build the monolayer are soluble in aqueous solutions, adsorptive preconcentration on mercury electrodes was used to prepare the monolayer coating. The monolayer was electroactive due to the presence of the azo or azoxy unit in the molecules. Monolayers of crown ethers bearing an azo group in the macrocycle were shown to recognize alkali metal cations present in the solution. Changes of the parameters of the voltammetric reduction peaks - peak potential and peak width, served as an indication of specific interactions of the monolayer of 13-membered and 16-membered azocrown ethers with Na⁺ and K⁺ cations, respectively.The monolayers capable of recognizing cations have also been prepared on the aqueous solution-air interface, using the Langmuir technique. In this approach, amphiphilic derivatives of the azocrowns were synthesized and the monolayer has been assembled on the subphase containing metal cations. Binding of the cation by the macrocycle has a stabilizing effect on the monolayer and higher collapse pressures are achieved than on the pure water subphase. The monolayer was transferred from the air-water interface on the solid substrate using the Langmuir-Blodgett technique. Thin mercury film electrodes on the Ag substrate, or An films evaporated on glass slides were employed as the electrode substrates. The former gave monolayer modified electrodes of higher stability.Presented at the Sixth International Seminar on Inclusion Compounds, Istanbul, Turkey, 27–31 August, 1995.     

Surface phase behavior and microstructure of lipid/PEG-emulsifier monolayer-coated microbubbles

Langmuir trough methods and fluorescence microscopy were combined to investigate the phase behavior and microstructure of monolayer shells coating micron-scale bubbles (microbubbles) typically used in biomedical applications. The monolayer shell consisted of a homologous series of saturated acyl chain phospholipids and an emulsifier containing a single hydrophobic stearate chain and polyethylene glycol (PEG) head group. PEG-emulsifier was fully miscible with expanded phase lipids and phase separated from condensed phase lipids. Phase coexistence was observed in the form of dark condensed phase lipid domains surrounded by a sea of bright, emulsifier-rich expanded phase. A rich assortment of condensed phase area fractions and domain morphologies, including networks and other novel structures, were observed in each batch of microbubbles. Network domains were reproduced in Langmuir monolayers under conditions of heating–cooling followed by compression–expansion, as well as in microbubble shells that underwent surface flow with slight compression. Domain size decreased with increased cooling rate through the phase transition temperature, and domain branching increased with lipid acyl chain length at high cooling rates. Squeeze-out of the emulsifier at a surface pressure near 35 mN/m was indicated by a plateau in Langmuir isotherms and directly visualized with fluorescence microscopy, although collapse of the solid lipid domains occurred at much higher surface pressures. Compression of the monolayer past the PEG-emulsifier squeeze-out surface pressure resulted in a dark shell composed entirely of lipid. Under certain conditions, the PEG-emulsifier was reincorporated upon subsequent expansion. Factors that affect shell formation and evolution, as well as implications for the rational design of microbubbles in medical applications, are discussed.     

Superoxide sensor based on cytochrome c immobilized on mixed-thiol SAM with a new calibration method

Cytochrome c was immobilized on a mixed-thiol (mercaptoundecanoic acid/mercaptoundecanol) modified gold electrode (MUA:MU/cyt c electrode). Characterization of the cyt c electrode showed a quasi-reversible, electrochemical redox behavior with a formal potential of −13±5 mV (versus Ag/AgCl) for the surface adsorbed protein and 3±5 mV for covalently immobilized cyt c. The heterogeneous electron transfer rate constants were determined to be about 70 and 40 s⁻¹ for both states of the protein, respectively. They were found to be significantly higher than those of pure MUA-modified cyt c electrodes (MUA/cyt c electrodes). The interaction of superoxide radicals (O₂⁻) with the (MUA:MU)/cyt c electrode was characterized and used for an amperometric O₂⁻ detection. The influence of H₂O₂ and uric acid on the sensor signal was investigated. The sensitivity of the (MUA:MU)/cyt c electrode to O₂⁻ was significantly improved compared with that of the MUA/cyt c electrode. Based on a kinetic model for the superoxide detection system, a new calibration method was established. This simple and fast method used the spontaneous dismutation of KO₂ and was compared with the enzymatic superoxide generation system using xanthine oxidase.     

硅表面嫁接有机单分子膜的研究近况

由于在微电子、化学 /生物化学传感器、纳米技术及太阳能等领域具有潜在的应用价值 ,通过 Si— C键在硅表面上直接嫁接有机单分子膜 ,已成为近几年新开展的研究热点 .对这一研究领域进行了概要综述