Quantitative thermogravimetric analysis of binary mixtures

Thermogravimetric analysis is used to determine the amounts of Mg(OH)₂ and Mg(CH₃COO)₂in a mixture thereof. The application and suitability of different analysis methods are discussed. In the first method the mass losses in the temperature ranges as indicated by the decomposition of the pure compounds were used. Results obtained using these temperature ranges were unusable. The percentage mass losses due to the decomposition of Mg(OH)₂ and Mg(CH₃COO)₂ were then determined in a second method using the minimum in the derivative mass vs. temperature curves. The results obtained by this method compared well with the actual values for mixtures containing more than 15% magnesium acetate. The third method employed the total experimental mass loss of both decomposition reactions. The results obtained using this method compared well to the actual values, giving a R ² value of more than 0.99. This method of using the total mass losses can however only be used for binary mixtures that consist only of magnesium hydroxide and magnesium acetate. This revised version was published online in August 2006 with corrections to the Cover Date.     

Indirect spectrophotometric determination of cyanide

A spectrophotometric method for cyanide based on its inhibition of the colour formation reaction between nickel(II) and 3-(4,5-dimethyl-2-thiazolylazo)-2,6-dihydroxybenzoic acid has been developed, and allows the determination of down to 0.1 g of cyanide. Most of the interferences can be avoided by displacement of the hydrogen cyanide using an arsine generator.     

光谱电化学法测定水果中抗坏血酸的研究

本文采用平行入射式光谱电化学装置，对水果中的抗坏血酸进行测定并寻找了最佳的测定条件。方法简便快捷，可消除背景干扰。线性范围１．０×１０＾－５－１．０×１０＾－４ｍｏｌ／Ｌ，检测下降为４．０×１０＾－６ｍｏｌ／Ｌ，回收率高，结果满意。     

硫酸颜色反应用于荧光法测定利血平研究

提出了硫酸颜色反应用于利血平的荧光分析新方法。利用血平与浓硫酸反应，生成强荧光物质，所得产物的荧光强度与利血平的浓度在０－０．６μｇ／ｍＬ范围内有良好的线性关系。检测限为０．２ｎｇ／ｍＬ。本法可直接用于尿液中利血平的定量分析，回收率为８２．５％－８４．２％。     

Solid sampling Fourier transform infrared determination of Mancozeb in pesticide formulations

A series of approaches have been assayed for FTIR determination of Mancozeb in several solid commercial fungicides using different calibration strategies. The simplest procedure was based on the use of the ratio between the absorbance of a characteristic band of Mancozeb and that of a KSCN internal standard measured in the FTIR spectra obtained from KBr pellets. It was employed the quotient between peak height absorbance values at 1525 cm⁻¹ for Mancozeb and 2070 cm⁻¹ for KSCN. In these conditions a precision as relative standard deviation (RSD) of 0.6% and a relative accuracy error of 0.8% (w/w) were found. For complex formulations, containing other compounds with characteristic absorption bands at different wavenumbers than Mancozeb, one of them was used as internal reference being employed the standard addition approach. In this case, the Mancozeb bands at 1525 cm⁻¹ or at 1289 cm⁻¹ were employed, being used the ferrocyanide band at 2075 cm⁻¹ as internal reference. RSD values between 0.7-1.4% and a relative accuracy error of 3% (w/w) were found. A third strategy was based on the use of partial least squares (PLS) calibration. A reference set was prepared mixing Mancozeb, Kaolin, Cymoxanil and KBr, being predicted the Mancozeb concentration in pesticide formulations by using the quotient between absorbance bands of Mancozeb and those of Cymoxanil. In these conditions a relative accuracy error of 0.6% (w/w) and a relative standard deviation of 1.3% were found.     

Ab initio structure determination of new compound Ba3(BO3)(PO4)

The crystal structure of new compound Ba₃BPO₇ was determined by ab initio method from high-resolution conventional X-ray powder diffraction data. The Rietveld refinement converged to R_p=5.92%, R_wp=8.87%, R_exp=5.00% with the following details: Hexagonal, space group P6₃mc, a=5.4898 (1) Å, c=14.7551(1) Å, Z=2. The basic unit of the structure is the [BaO₁₀]-[BO₃]-[PO₄] polar polyhedra-chain composed of Ba1-B-P-O cluster. These chains, running along c-axis, stack in a HCP mode to build the whole structure with triangular prism channels. The channels are parallel to c-axis too, in which Ba2 and Ba3 are located.     

Spectrophotometry Determination of Copper and Palladium Using Some 1,3,5-Triphenylformazans

A new rapid and accurate method for the spectrophotometric microdetermination of Cu(II) and Pd(II) using some 1,3,5-triphenylformazans (I) is given. The optimum conditions for the formation of the complexes are extensively investigated. The ligands form 1:1 and 1:2 (M:L) complexes with Cu and Pd ions, Beer's law is obeyed up to 3.8 and 6.5 ppm Cu and Pd respectively. The influence of foreign ions is investigated. The ligands were used successfully as indicators in spectrophotometric titration of Cu and Pd ions with EDTA and CDTA.     

Determination of phenol and catechol concentrations with oxygen probes coated with immobilized enzymes or immobilized cells

The enzyme phenol 2-hydroxylase was immobilized on Sepharose and used in conjunction with an O₂ electrode for quantitating phenol. Similarly, catechol 1,2-oxygenase was used for quantitating catechol. A third probe was prepared by immobilization ofTrichosporon cutaneum cells rather than purified phenol 2-hydroxylase for phenol quantitation. The whole cell system gave results comparable to the immobilized enzyme system.     

Determination of trace scandium by ion-exchanger phase spectrophotometry withp-nitrochlorophosphonazo

Ion-exchanger phase Spectrophotometry withp-nitrochlorophosphonazo (CPApN) has been developed for the determination of scandium. The linear range is 1–8 g of scandium in 50 ml of solution, using 0.8 g of resin, with an apparent molar absorptivity of 2.76 × 10⁵ 1 mol^–1 cm^–1. Aluminum and rare earth elements in reasonable amounts do not interfere. The method has been applied successfully to the determination of scandium in alloys, with relative standard deviations of 2–4%.     

Determination of cadmium in mixtures with metal ions

A method for the determination of cadmium microamounts in mixtures with metallic ions withE _1/2 near toE _1/2 of cadmium is discussed. For higher selectivity cadmium was extracted in the form of the pyridin-thiocyanate complexes prior to polarography.

---

Bestimmung von Cadmium(II) neben anderen Metallionen

Zusammenfassung Es wird eine polarographische Methode zur Bestimmung von Cd(II) neben anderen Metallionen mitE _1/2 naheE _1/2(Cd) diskutiert. Zur Erhöhung der Selektivität und Genauigkeit wird eine Pyridin-Thiocyanat-Extraktion vorgeschalten.