Influence of preparation methods on structure and properties of PA6/PA66 blends: A comparison of melt‐mixing and in situ blending

The blends composed of polyamide 6 (PA6) and polyamide 66 (PA66) were obtained using two different preparation methods, one of which was the melt‐mixing through a twin‐screw extruder and the subsequent injection molding; and the other, the in situ blending through anionic polymerization of ε‐caprolactam in the presence of PA66. For the former, there existed a remarkable improvement in toughness but a drastic drop in strength and modulus; however, for the latter, a reverse but less significant trend of mechanical properties change appeared. Various characterizations were conducted, including the analyses of crystalline morphology, crystallographic form, and crystallization and melting behaviors using polarized optical microscopy (POM), wide‐angle X‐ray diffraction (WAXD), and differential scanning calorimetry (DSC), respectively; observation of morphology of fractured surface with scanning electron microscope (SEM); measurement of glass transition through dynamic mechanical analysis (DMA); and the intermolecular interaction as well as the interchange reaction between the two components by Fourier transform infrared spectrometry (FT‐IR) and ¹³C solution NMR. The presence and absence of interchange reaction was verified for the in situ and melt‐mixed blends, respectively. It is believed that the transreaction resulted in a drop in glass transition temperature (T_g) for the in situ blends, contrary to an increase of T_g with increasing PA66 content for the melt‐mixed ones. And the two kinds of fabrication methods led to significant differences in the crystallographic form, spherulite size and crystalline content and perfection as well. Accordingly, it is attempted to explain the reasons for the opposite trends of changes in the mechanical properties for these two blends. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1176–1186, 2007     

A convection/reaction/switching system

We consider a spatially distributed hybrid system consisting of a convection/reaction system in which the reaction switches discontinuously in time between modes, independently at each spatial point on reaching “switching thresholds”. The model involves a novel formulation for evolution of the free boundary between the modal regions.     

A computational study into the reactivity of epichlorohydrin and epibromohydrin under basic conditions in the gas phase and solution

Ab initio molecular orbital calculations were carried out on epibromohydrin (EBH) and epichlorohydrin (ECH) in an attempt to elucidate their reactivity with respect to a hard nucleophile, hydroxide. These systems were modeled in both the gas phase and a polar solvent under basic conditions. In the gas phase, it was determined that a direct displacement mechanism (nucleophilic attack at the C1 position) was operative for EBH, while an indirect pathway (nucleophilic attack at the C3 position and subsequent intramolecular displacement) was followed for ECH. In an acetone solution, only the indirect displacement mechanism was found to occur. An electrostatic argument is advanced to account for this behavior in polar solution. Copyright © 2007 John Wiley & Sons, Ltd.     

The combination technique and some generalisations

The combination technique has repeatedly been shown to be an effective tool for the approximation with sparse grid spaces. Little is known about the reasons of this effectiveness and in some cases the combination technique can even break down. It is known, however, that the combination technique produces an exact result in the case of a projection into a sparse grid space if the involved partial projections commute.

The performance of the combination technique is analysed using a projection framework and the C/S decomposition. Error bounds are given in terms of angles between the spanning subspaces or the projections onto these subspaces. Based on this analysis modified combination coefficients are derived which are optimal in a certain sense and which can substantially extend the applicability and performance of the combination technique.     

General synchronization dynamics of coupled Van der Pol–Duffing oscillators

This paper considers the general synchronization dynamics of coupled Van der Pol–Duffing oscillators. The linear and nonlinear stability analysis on the synchronization process is derived through the Whittaker method and the Floquet theory in addition to the multiple time scales method. A stability map displaying different dynamical states of the system is performed. Numerical simulation is carried out to support and to complement the accuracy of the analytical treatment.     

线性递归序列模q

设{u_k}_k≥0为一个线性递归序列．序列{u_k(mod q)}_(k≥0)是周期的,很多人都对其周期有过研究．本文应用二次数域中理想的理论,较完全地刻面了二次线性递归序列模q的周期长度,所获结果加强并推广了Engstrom及Wall的结论．     

Empirical minimization

We investigate the behavior of the empirical minimization algorithm using various methods. We first analyze it by comparing the empirical, random, structure and the original one on the class, either in an additive sense, via the uniform law of large numbers, or in a multiplicative sense, using isomorphic coordinate projections. We then show that a direct analysis of the empirical minimization algorithm yields a significantly better bound, and that the estimates we obtain are essentially sharp. The method of proof we use is based on Talagrand's concentration inequality for empirical processes. Research partially supported by NSF under award DMS-0434393. Research partially supported by the Australian Research Council Discovery Porject DP0343616.     

Study of the spontaneous formation of organic layers on carbon and metal surfaces from diazonium salts

This study investigates the spontaneous grafting of different para-substituted phenyl groups on carbon and metallic surfaces from diazonium salts solutions. Glassy carbon, nickel, zinc and iron plates were allowed to react with an acetonitrile solution of aryldiazonium tetrafluoroborate salt by simple dipping. The surfaces were characterized before and after their immersion by XPS and AFM to evidence the formation of a coating on the different materials. The results are indicative of the presence of substituted phenyl groups on all the investigated surfaces. This study also aims at correlating grafting efficiency with metal reactivities and diazonium salt electronic properties by means of AFM and FT-IRRAS. For this purpose, zinc and nickel were chosen due to their opposite reducing properties and two diazonium salts were selected with electron-donor or -withdrawing para-substituents. The results tend to indicate that redox properties of both partners (diazonium + metal) are of prime importance for grafting to occur.     

Discrete approximation of integral operators

A method to approximate the eigenvalues of linear operators depending on an unknown distribution is introduced and applied to weighted sums of squared normally distributed random variables. This area of application includes the approximation of the asymptotic null distribution of certain degenerated U- and V-statistics.

     

Fractional-Linear Transformations of Operator Balls; Applications to Dynamical Systems

The operator sets, which are the subject of this paper, have been studied in many papers where, under different restrictions on the generating operators, convexity, compactness in the weak operator topology, and nonemptiness were proved for sets of different classes under study. Then the results obtained were used in these papers to solve several applied problems. Namely, they played the key role in establishing the dichotomy of nonautonomous dynamical systems, with either continuous or discrete time. In the present paper, we generalize and sharpen the already known criteria and obtain several new criteria for convexity, compactness, and nonemptiness of several special operator sets. Then, using the assertions obtained, we construct examples of sets of the form under study which are nonconvex, noncompact in the weak operator topology, as well as empty, and are generated by ＂smooth＂ operators of a special class. The existence problem for such sets remained open until the authors of this paper announced some of its results.