多源信息融合的环境舒适度检测与评价

为了能够实现对室内环境的监测和舒适度的调节,首先需要获取准确、及时的室内环境参数。针对目前室内环境监测系统存在自动化程度低、检测点部署欠灵活,安装维护困难,监控难度大等问题,设计开发了一种基于无线传感网络的室内环境监测系统。以ZigBee技术为核心,构建无线传感器网络,自动采集和传输室内相关环境参数;通过结合物联网云平台,实现远程监控和报警;运用模糊综合评价的方法,通过统计、分析、计算,得到符合实际的室内环境舒适度水平。本系统通过硬件设计降低了室内环境监测成本,通过软件设计提高了系统的监测水平和灵活性,通过结合模糊综合评价方法和物联网云平台降低了监控难度。经实验,验证了本系统在实际环境下的使用性能,适合推广应用。     

激光诱导击穿光谱法定量分析水泥中的铜元素

为定量分析水泥中的铜(Cu)元素,根据激光诱导击穿光谱分析方法(Ll BS)的特点,建立了激光诱导击穿光谱分析系统。采用标准加入法为定标方法,制备了5个不同含铜量的水泥样品。根据LIBS谱图,以213.598 nm和219.958 nm作为分析线。应用Savitzky-Golary卷积平滑方法对光谱数据进行了预处理,比较了Guass、Lorentz和Voigt拟合方法对光谱曲线的拟合效果。对测量结果采用一元线性拟合建立了相应的定标曲线,213.598 nm和219.958 nm定标曲线的校正决定系数分别为0.994 8和0.986 4,平均相对误差分别为3.20%和5.78%。实验结果表明:213.598 nm作为分析线的准确度优于219.958 nm分析线,该方法能够满足水泥中Cu元素定量分析的要求。     

用傅里叶分析法研究艾里光束远场传播特性

为了从理论上深入分析新型无衍射光束艾里光束在有限能量条件下的远场传播特性,首先,从决定光波在自由空间传播的一维旁轴波动方程入手,采用傅里叶分析法,结合艾里函数的特殊性质,并利用经过指数衰减的有限能量初始条件,完整给出了有限能量条件下用于精确描述一维艾里光束在自由空间传播特性的波动方程解析解.然后,利用所得到解析解分别对一维和二维艾里光束在自由空间的传播特性进行了研究,重点分析了不同参量条件对艾里光束进行无衍射传播和横向自加速的影响.研究表明:当任意横向尺度为100μm,衰减系数为0.03、0.05、0.07、0.1、0.2时,二维艾里光束无衍射传播距离分别为1 014、624、455、338、193mm;当横向尺度保持不变时,衰减系数越小,艾里光束保持无衍射传播的距离越大;当衰减系数保持不变时,横向尺度越小,艾里光束横向自加速越大.所采用的研究方法也可用于研究艾里光束在介质中的传播特性.     

Role of entropy generation minimization in thermal optimization

Thermal optimization is very important for improving the performances of thermal systems. In engineering, the entropy generation minimization(EGM) has been widely used to optimize and evaluate the performances of thermal systems.However, the consistency between the EGM and the optimization objective should be specified when the EGM is used.In this paper, we discuss the view angle of irreversibility of entropy generation, and show that entropy generation directly reflects the exergy destruction or the ability loss of doing work. As the design objective in a thermal system is not often consistent with the view angle of irreversibility of entropy generation, the EGM may not lead to the optimal value of the design objective. In heat transfer and heat-work conversion, the inconsistence between the design objectives and the EGM is shown with some examples, and the applicability of the EGM is found to be conditional. The "entropy generation paradox" in heat exchanger analyses is also discussed, and it is shown that there is no direct monotonic relation between the minimum entropy generation rate and the best heat transfer performance of heat exchangers.     

覆膜长周期光纤光栅在生化分析中的应用及研究进展

总结了纳米薄膜修饰的长周期光纤光栅在折射率生物传感器方面的研究进展,重点介绍了纳米薄膜对长周期光纤光栅折射率传感性能的影响,详细阐述了覆膜长周期光纤光栅在生化分析检测领域的应用,并对其在折射率传感方面的应用前景作了展望。     

Analyses of Lattice Traffic Flow Model on a Gradient Highway

The optimal current difference lattice hydrodynamic model is extended to investigate the traffic flow dynamics on a unidirectional single lane gradient highway. The effect of slope on uphill/downhill highway is examined through linear stability analysis and shown that the slope significantly affects the stability region on the phase diagram.Using nonlinear stability analysis, the Burgers, Korteweg-deVries(KdV) and modified Korteweg-deVries(mKdV) equations are derived in stable, metastable and unstable region, respectively. The effect of reaction coefficient is examined and concluded that it plays an important role in suppressing the traffic jams on a gradient highway. The theoretical findings have been verified through numerical simulation which confirm that the slope on a gradient highway significantly influence the traffic dynamics and traffic jam can be suppressed efficiently by considering the optimal current difference effect in the new lattice model.     

Sub-leading flow modes in PbPb collisions at sNN = 2.76 TeV from the HYDJET++ model

Recent LHC results on the appearance of sub-leading flow modes in PbPb collisions at 2.76 TeV, related to initial-state fluctuations, are analyzed and interpreted within the HYDJET++ model. Using the newly introduced Principal Component Analysis (PCA) method applied to two-particle azimuthal correlations extracted from the model calculations, the leading and sub-leading flow modes are studied as a function of the transverse momentum (p_T) over a wide centrality range. The leading modes of the elliptic (v₂⁽¹⁾) and triangular (v₃⁽¹⁾) flow calculated with the HYDJET++ model reproduce rather well the v₂{2} and v₃{2} coefficients measured experimentally using the two-particle correlations. Within the p_T ≤ 3 GeV/c range, where hydrodynamics dominates, the sub-leading flow effects are greatest at the highest p_T of around 3 GeV/c. The sub-leading elliptic flow mode (v₂⁽²⁾), which corresponds to the n = 2 harmonic, has a small non-zero value and slowly increases from central to peripheral collisions, while the sub-leading triangular flow mode (v₃⁽²⁾), which corresponds to the n = 3 harmonic, is even smaller and does not depend on centrality. For n = 2, the relative magnitude of the effect measured with respect to the leading flow mode shows a shallow minimum for semi-central collisions and increases for very central and for peripheral collisions. For the n = 3 case, there is no centrality dependence. The sub-leading flow mode results obtained from the HYDJET++ model are in rather good agreement with the experimental measurements of the CMS Collaboration.     

集成芯片LED场地照明灯新型叠片散热器热分析

针对大功率LED场地照明集成芯片散热问题,提出了一种新型散热器结构。该散热器利用高导热纯铝材料,采用叠片的方式成型。采用实验和有限元模拟相结合的研究方法,对包括直流电源的新型叠片式LED散热器的散热性能进行了研究。结果表明：LED电源达到稳态所需时间较长,最终能够稳定在一个较低的温度范围。叠片式纯铝散热器通过增加散热面积和提高散热器材料的导热系数能有效降低LED结温。所设计的散热器和选择的电源在自然对流条件下能够很好地满足250 W大功率LED散热要求。     

不同产地亚麻籽矿物质元素及脂肪酸组成的主成分分析

亚麻籽是一种具有食用与药用价值的生物质,富含多种营养物质与矿物质元素。我国是亚麻籽的主要产地之一,为探讨不同产地亚麻籽中矿物质元素与脂肪酸组成的主要特征成分,采用电感耦合等离子体质谱法(ICP-MS)分析了10个产地亚麻籽中的17种矿物质元素,利用气相色谱-质谱联用法(GC-MS)分析了于相同条件下提取的10个产地亚麻籽油脂中的脂肪酸组成。采用主成分分析法对10个产地亚麻籽中的矿物质元素及脂肪酸组成进行了分析,探讨了不同产地亚麻籽矿物质元素及脂肪酸组成的差异,分析了矿物质元素及脂肪酸的主要特征成分。结果表明,K,Sr,Mg,Ni,Co,Cr,Cd,Se,Zn和Cu是亚麻籽的主要特征矿物质元素,C16∶0,C18∶0,C18∶2,C18∶3,C20∶0,C20∶1是亚麻籽油脂的主要特征脂肪酸。ICP-MS和GC-MS结合主成分分析,可有效揭示不同产地亚麻籽中矿物质元素与脂肪酸组成的特征与差异,进而为亚麻籽的合理、有效利用提供重要的理论依据。     

基于逐步回归分析的激光惯导温度补偿研究

针对激光陀螺惯导的温度补偿,将影响激光陀螺零偏的各种可能的变量作为零偏补偿的状态变量,利用逐步回归分析方法,挑选出对零偏贡献较大的显著变量,建立精准的数学物理模型,并对实测的激光陀螺进行温度补偿建模。结果表明,温度变化率以及与温度的交叉积对温度补偿模型的影响不显著,得到的温度补偿模型可以对陀螺的零偏进行实时补偿,提高了陀螺的精度。