晶硅太阳电池原位光老化及热致输运机理

为研究晶体硅太阳电池在标准模拟光条件下的输出特性变化规律和电池内部载流子输运特性,采用原位光老化技术对被测电池进行光照处理,按标准测试实验流程测量电池的伏安特性及光谱响应等参量,发现原位光老化后太阳电池伏安特性各项参量衰减,导致电池效率降低;短波段光谱响应微量下降,是由于原位光老化过程中电池表面产生极微量的面缺陷导致经过硅表面的微量载流子被复合;而长波段响应明显降低,是由于晶硅内大量体缺陷被激活导致长波载流子在经过硅材料内部时被复合.随后将光老化后电池退火并测量比对电池各项特性参量,结果表明,退火对光老化后电池内部深层体缺陷具有较好的修复功能,但对浅层面缺陷没有修复功能,最终造成电池伏安特性参量和光谱响应只得到部分恢复.     

Resonant control of solitons

It is shown that the effect of “scattering on resonance” can be used to control envelope solitons in the driven nonlinear Schrödinger equation. The control occurs by the frequency modulated driving with multiple crossing of the resonant frequency of the soliton.     

Nonexistence of global solutions of wave equations with weak time-dependent damping and combined nonlinearity

In our previous two works, we studied the blow-up and lifespan estimates for damped wave equations with a power nonlinearity of the solution or its derivative, with scattering damping independently. In this work, we are devoted to establishing a similar result for a combined nonlinearity. Comparing to the result of wave equation without damping, one can say that the scattering damping has no influence.     

Improvement of solar cell efficiency by applying Si3N4 nanopattern on glass substrate

A cylindrical Si₃N₄ nanopattern whose heights was 200 nm was fabricated on a glass substrate, and an aluminum-doped zinc oxide (AZO) layer was grown on the nanopatterned glass substrate. The nanopattern was applied to an amorphous silicon solar cell in order to increase the light-scattering effect, thus enhancing the efficiency of the solar cell. The reflectance of the solar cell on the Si₃N₄ nanopattern decreased and its absorption increased. Compared to a flat substrate, the short-circuit current density (J_sc) and conversion efficiency of a solar cell on the Si₃N₄ nanopatterned substrate were improved by 17.9% and 24.2%, respectively, as determined from solar simulator measurements.     

Fields,particles and universality in two dimensions

We discuss the use of field theory for the exact determination of universal properties in two-dimensional statistical mechanics. After a compact derivation of critical exponents of main universality classes, we turn to the off-critical case, considering systems both on the whole plane and in presence of boundaries. The topics we discuss include magnetism, percolation, phase separation, interfaces, wetting.     

Synthesis and Polymerization of Spiro Oxyphosphoranes

Novel methods of synthesis of spiro acyloxyphosphoranes are described emphasizing the significance of the first isolated instance of these new species. Then, the no-catalyst alternating copolymerizations of the combinations of cyclic phosphorus(III) compounds (serving as nucleophilic monomer, M_N) with acrylic acid derivatives and with α-keto acids (electrophilic monomer, M_E) are mentioned. These copolymerizations proceed without added initiator. Spiro oxyphosphoranes play an important role in the copolymerization scheme in the equilibrium with the ⁺M_N - M_E ^? zwitterion, the key intermediate of the copolymerization. Finally, new reactions of spiro acyloxyphosphoranes with nucleophiles, alcoholysis and aminolysis polymerizations are presented.     

Interactions Between Polymers and Nanoparticles: Formation of “Supermicellar” Hybrid Aggregates

Abstract

When polyelectrolyte‐neutral block copolymers are mixed in solutions to oppositely charged species (e.g., surfactant micelles, macromolecules, proteins, etc.), there is the formation of stable “supermicellar” aggregates combining both components. The resulting colloidal complexes exhibit a core‐shell structure, and the mechanism yielding to their formation is electrostatic self‐assembly. In this contribution, we report on the structural properties of “supermicellar” aggregates made from yttrium‐based inorganic nanoparticles (radius 2 nm) and polyelectrolyte‐neutral block copolymers in aqueous solutions. The yttrium hydroxyacetate particles were chosen as a model system for inorganic colloids, and also for their use in industrial applications as precursors for ceramic and opto‐electronic materials. The copolymers placed under scrutiny are the water‐soluble and asymmetric poly(sodium acrylate)‐b‐poly(acrylamide) diblocks. Using static and dynamical light‐scattering experiments, we demonstrate the analogy between surfactant micelles and nanoparticles in the complexation phenomenon with oppositely charged polymers. We also determine the sizes and the aggregation numbers of the hybrid organic–inorganic complexes. Several additional properties are discussed, such as the remarkable stability of the hybrid aggregates and the dependence of their sizes on the mixing conditions.     

New discrimination method combining hit quality index based spectral matching and voting

A new discrimination method, called hit quality index (HQI)-voting, that uses the HQI for discriminant analysis has been developed. HQI indicates the degree of spectral matching between two spectra as known. In this method, a library sample yielding the highest HQI value for an unknown sample was initially searched and a group containing this sample was chosen as the group for the unknown sample. When overall spectral features of two groups are quite close to each other, many library samples with similar HQI values could be available for an unknown sample. In this situation, the simultaneous consideration of multiple votes (several library samples with close HQI values) for final decision would be more robust. In order to evaluate the discrimination performance of HQI-voting, three different near-infrared (NIR) spectroscopic datasets composed of two sample groups were used: (1) domestic and imported sesame samples, (2) domestic and imported Angelica gigas samples, and (3) diesel and light gas oil (LGO) samples. For the purpose of comparison, principal component analysis–linear discriminant analysis (PCA–LDA), partial least squares–discriminant analysis (PLS–DA) as well as k-nearest neighbor (k-NN) were also performed using the same datasets and the resulting accuracies were compared. The discrimination performances improved with the use of HQI-voting in comparison with those resulted from PCA–LDA and PLS–DA. The overall results support that HQI-voting is a comparable discrimination method to that of existing factor-based multivariate methods.     

Multidimensional gas chromatography for the characterization of permanent gases and light hydrocarbons in catalytic cracking process

An integrated gas chromatographic system has been successfully developed and implemented for the measurement of oxygen, nitrogen, carbon monoxide, carbon dioxide and light hydrocarbons in one single analysis. These analytes are frequently encountered in critical industrial petrochemical and chemical processes like catalytic cracking of naphtha or diesel fuel to lighter components used in gasoline. The system employs a practical, effective configuration consisting of two three-port planar microfluidic devices in series with each other, having built-in fluidic gates, and a mid-point pressure source. The use of planar microfluidic devices offers intangible advantages like in-oven switching with no mechanical moving parts, an inert sample flow path, and a leak-free operation even with multiple thermal cycles. In this way, necessary features such as selectivity enhancement, column isolation, column back-flushing, and improved system cleanliness were realized. Porous layer open tubular capillary columns were employed for the separation of hydrocarbons followed by flame ionization detection. After separation has occurred, carbon monoxide and carbon dioxide were converted to methane with the use of a nickel-based methanizer for detection with flame ionization. Flow modulated thermal conductivity detection was employed to measure oxygen and nitrogen. Separation of all the target analytes was achieved in one single analysis of less than 12 min. Reproducibility of retention times for all compounds were found to be less than 0.1% (n = 20). Reproducibility of area counts at two levels, namely 100 ppm_v and 1000 ppm_v over a period of two days were found to be less than 5.5% (n = 20). Oxygen and nitrogen were found to be linear over a range from 20 ppm_v to 10,000 ppm_v with correlation coefficients of at least 0.998 and detection limits of less than 10 ppm_v. Hydrocarbons of interest were found to be linear over a range from 200 ppb_v to 1000 ppm_v with correlation coefficients of greater than 0.999 and detection limits of less than 100 ppb_v.     

Polymer colloids formed by polyelectrolyte complexation of vinyl polymers and polysaccharides in aqueous solution

The polyelectrolyte complex formed from the polyanion and polycation was studied by turbidimetry, static and electrophoretic light scattering, and elementary analysis. Sodium salts of polyacrylate (PA) and heparin (Hep) were chosen as the polyanion, and hydrochloric salts of poly(vinyl amine) (PVA) and chitosan (Chts) as the polycation. Although these vinyl polymers and polysaccharides have remarkably different backbone chemical structures and linear charge densities, all the four combinations PA-PVA, PA-Chts, Hep-PVA, and Hep-Chts provide almost stoichiometric polyelectrolyte complexes which are slightly charged owing to the adsorption of the excess polyelectrolyte component onto the neutral complex. The charges stabilize the complex colloids in aqueous solution of a non-stoichiometric mixture, and the aggregation number of the complex colloids increases with approaching to the stoichiometric mixing ratio. The mixing ratio dependence of the aggregation number for the four complexes is explained by the model proposed in the previous study.