Chemical reactivity of PVD-coated WC-Co tools with steel

The chemical reactivity of CrN, ZrN, TiC_xN_1−x and naCo^® PVD coatings on a WC-Co cemented carbide substrate with steel has been evaluated by means of the static interaction couples technique. Diffusion experiments with coated and uncoated tools were carried out at 900, 1100 and 1300 °C in order to establish the maximum temperature at which the substrate-coating-workpiece combinations are chemically stable. Computational equilibrium thermodynamics was used to identify the interaction products formed at elevated temperature and the chemical solubility of the different coating materials into iron. A metallic (Fe, Co) fcc solid solution was identified at the steel side of the interface from 1100 °C on for all the coated tools and from 900 °C for the uncoated carbide. In addition to this interaction product, the ?-carbide was identified at 1300 °C on the WC-Co side of the interface. Both of the experimental findings and thermodynamic equilibrium solubility calculations demonstrated that the PVD-coated WC-Co tools exhibit a lower chemical reactivity with respect to the uncoated tools.     

Mössbauer spectroscopy studies of spin reorientations in amorphous and crystalline (Co0.2Fe0.8)72.5Si12.5B15 glass coated micro-wires

Thermo-gravimetric, differential scanning calorimetry and comprehensive ⁵⁷Fe Mössbauer spectroscopy studies of amorphous and crystalline ferromagnetic glass coated (Co_0.2Fe_0.8)_72.5Si_12.5B₁₅ micro-wires have been recorded. The Curie temperature of the amorphous phase is T_C(amorp) ∼730 K. The analysis of the Mössbauer spectra reveals that below 623 K the easy axis of the magnetization is axial-along the wires, and that a tangential or/and radial orientation occurs at higher temperatures. At 770 K, in the first 4 hours the Mössbauer spectrum exhibits a pure paramagnetic doublet. Crystallization and decomposition to predominantly α-Fe(Si) and Fe₂B occurs either by raising the temperature above 835 K or isothermally in time at lower temperatures. Annealing for a day at 770 K, leads to crystallization. In the crystalline material the magnetic moments have a complete random orientation. After cooling back to ambient temperature, both α-Fe(Si) and Fe₂B in the glass coated wire show pure axial magnetic orientation like in the original amorphous state. The observed spin reorientations are associated with changes in the stress induced by the glass coating.     

Dirac Particles＇ Hawking Radiation from a Schwarzschild Black Hole

Considering energy conservation and the backreaction of particles to spacetime, we investigate the massless/massive Dirac particles＇ Hawking radiation from a Schwarzschild black hole, The exact expression of the emission rate near the horizon is obtained and the result indicates that Hawking radiation spectrum is not purely thermal. The result obtained is consistent with the results obtained before. It satisfies the underlying unitary theory and offers a possible mechanism to explain the information loss paradox. Whereas the improved Damour-Rufflni method is more concise and understandable,     

Sodium doped binary clusters I: Ionization potentials of SinNam clusters

Sodium doped silicon clusters (Si_nNa_m, 3n11, 1m4) were produced by two independent laser vaporization methods and their ionization potentials were measured by scanning the wavelength of the UV dye laser. The IPs of most Si_nNa_m clusters decrease monotonously with the number of Na atoms, but IPs of Si₇Na_m and Si₁₀Na_m clusters show an apparent even-odd alternation; odd numbers of Na atoms efficiently decrease the IP but even numbers of Na atoms never significantly decrease the IPs. In addition, the reactivity of Si_nNa_m clusters for NO molecules was investigated with a fast flow reactor, and an anti-correlation between IP and the reactivity was clearly observed; clusters having high IP show low reactivity andvice versa.     

Structural and Electrical Properties of PZT/PVDF Piezoelectric Nanocomposites Prepared by Cold-Press and Hot-Press Routes

The 0-3 PZT/PVDF piezoelectric composites are prepared separately by hot-press and cold-press processes. The effects of the PZT content and the shaping-process on the composites are studied. The experimental results indicate that composites with 70% PZT nanopowders prepared by the hot-press method exhibit excellent piezoelectric and dielectric properties. The maxima of d₃₃ and ε of the composites prepared by hot-press method are about 30% and 65% higher than those prepared by the cold-press method, respectively. This is mainly attributed to the favourable coupling of the two materials in the process of the hot press and the formation of the β-type PVDF, which possesses better electric properties.     

Complex permittivity and microwave absorption properties of carbon nanotubes/polymer composite: A numerical study

Based on an equivalent resistance-capacitance (RC) network, we investigate theoretically the complex permittivity and microwave absorption properties of carbon nanotubes (CNTs)/polymer composite in the frequency range of 50 MHz-3 GHz using the logarithmic mixing rule. Both the real and imaginary parts of the permittivities of CNTs and polymer are considered in detail. The simulated results show that the real and imaginary permittivities of the composite increase explicitly with increasing volume fraction of CNTs, and the latter is more sensitive. The calculated complex permittivity spectra of the composite are in good agreement with the available experimental data. In addition, a good linear relationship between microwave absorbance and frequency is found.     

Thermodynamics of the Cu/Cu-redox equilibrium in soda-silicate and soda-lime-silicate melts

The thermodynamics of the redox equilibrium of Cu⁺/Cu²⁺ were determined by square-wave voltammetry in glass melts with the base mol% compositions x Na₂O · (100 − x) SiO₂ (x = 15, 20, 26 and 33) and (26 − x) Na₂O · x CaO · 74 SiO₂ (x = 0, 5, 10 and 15) doped with 1 mol% CuO in the temperature range from 850 to 1150 °C. All recorded voltammograms showed two maxima attributed to the reductions of Cu²⁺ to Cu⁺ and Cu⁺ to metallic copper. Both peaks are shifted to smaller potentials with decreasing temperature. With increasing melt basicity, the [Cu⁺]/[Cu²⁺]-ratio first increases, and remains constant for optical basicities >0.56. The effect of composition on the redox equilibrium is explained by the incorporation of both Cu⁺ and Cu²⁺ in octahedral coordination into the melt structure.     

Late-Time Evolution of the Phantom Scalar Perturbation in the Background of a Spherically Symmetric Static Black Hole

The late-time evolution of the phantom scalar perturbation is investigated in the spacetime of a four-dimensionai spherically symmetric static black hole. It is revealed that the asymptotic tail of the phantom scalar field is dominated by the growth behavior t-（l＋3/2）eμt, which depends on the multipole moment l and the field moss but is independent of the mass M and charge Q of the black hole. This growth behavior is in strong contrast to the decaying tall of the usual massive scalar perturbation and shows that the external phantom scalar perturbation is unstable in the spherically symmetric static black hole spacetime.     

Comparison of Laser Chemical Processing and LaserMicroJet for structuring and cutting silicon substrates

This paper deals with the development of a new cutting method for thin silicon solar wafers with liquid-jet-guided lasers (LaserMicroJet®, LMJ, and Laser Chemical Processing, LCP). Several laser systems with different wavelengths were tested to find the optimum laser system and processing parameters in terms of efficient material removal and deep laser cutting. Water and potassium hydroxide were used as carrier liquids to enhance laser ablation. The ablation efficiency was defined as a target parameter and experimentally determined by performing single laser grooves. It is demonstrated that the ablation process of LMJ is mainly affected by silicon melting and then removing by the liquid-jet momentum for single laser grooves. Best result for deep laser grooves is achieved if evaporation dominates the ablation process. Better surface quality referred to laser-induced crystalline damage is presented for a cut wafer with LMJ in comparison to a standard multiwire slurry saw. This shows a great potential of wafering with liquid-jet-guided lasers although no optimal liquid media was used.     

Synthesis of silica supported titania nanocomposite in controllable phase content and morphology

The silica supported titania nanocomposite thin films with controllable particle size and phase content were successfully prepared by a convenient post annealing approach involving in solid-solid interfacial reaction. The effects of growth conditions, such as the annealing temperature and silicon concentration on the particle size and phase content, were systematically studied by using Atomic force microscopy (AFM), Raman spectroscopy, X-ray diffraction (XRD), and X-ray spectroscopy (XPS). The results indicate that the silicon concentration is a dominant factor in the morphology, crystallization and phase transformation of these nanocomposites. A mechanism for the high temperature phase transformation is also proposed based on the migration of the oxygen vacancies.