Binding evaluation of isoform 1 fromCratylia mollis lectin to human mammary tissues

The phenomenon of altered carbohydrates in transformed cell surfaces has been studied through histochemical techniques using lectins. Specific binding patterns to normal and transformed mammary tissues were evaluated by Isoform 1 fromCratylia mollis lectin (Cra Iso 1). Protocols using a direct method, incubation of Cra Iso I conjugated to peroxidase (Cra Iso 1-Per) with mammary tissues, followed by diaminobenzidine and hydrogen peroxidase interaction, were performed. Neoplastic tissues, marked by Cra Iso 1, showed a higher intensity of staining than normal ones, in comparison withCanavalia ensiformis lectin, Concanavalin A (Con A), conjugated to peroxidase (Con A-Per). The assay with Cra Iso 1 also indicated a possible utilization of this lectin to characterize normal and transformed mammary cells.     

Simultaneous and rapid determination of the anticarcinogenic proteins Bowman-Birk inhibitor and lectin in soybean crops by perfusion RP-HPLC

There are numerous studies demonstrating a direct association between the ingestion of soybean and low cancer incidence. This fact has been related to the presence of Bowman-Birk inhibitor (BBI) and lectin in soybean. The simultaneous and fast determination of BBI and lectin in soybean is proposed, for the first time, in this work. Two different strategies were designed for the extraction of BBI and lectin: extraction of soybean proteins using a Tris-HCl buffer followed by isolation of BBI and lectin by the isoelectric precipitation of other soybean proteins (method I) or by the direct extraction of BBI and lectin using an acetate buffer (method II). The effect of the previous soybean defating on the extraction of BBI and lectin was also studied. Moreover, the possibility of using a high-intensity focalized ultrasonic probe for accelerating the extraction was explored and an optimization of the extraction time and ultrasound amplitude was performed. The extracts obtained were analysed by RP-HPLC-ESI-MS for the correct identification of BBI and lectin in soybean. Moreover, a fast chromatographic methodology using a perfusion column and UV detection was optimized for the rapid determination of BBI and lectin in soybean. After evaluating its analytical characteristics (linearity, precision, and recovery), the method was applied to the quantitation of BBI and lectin in different soybean varieties.     

Boronic acid–lectin affinity chromatography. 1. Simultaneous glycoprotein binding with selective or combined elution

We introduce a novel combination of boronic acid affinity chromatography with lectin affinity chromatography, dubbed as boronic acid–lectin affinity chromatography (BLAC). Concanavalin A and wheat germ agglutinin lectins were mixed with the pesudo-lectin boronic acid to form the BLAC affinity column and their performance was evaluated with standard glycoproteins. Optimization of the binding and elution buffers for the BLAC system is described. The BLAC columns were employed to isolate glycoproteins of interest using both selective and/or combined elution.     

Functionalized self-assembled monolayers for measuring single molecule lectin carbohydrate interactions

The specific interactions between sugar-binding proteins (lectins) and their complementary carbohydrates mediate several complex biological functions. There is a great deal of interest in uncovering the molecular basis of these interactions. In this study, we demonstrate the use of an efficient one-step amination reaction strategy to fabricate carbohydrate arrays based on mixed self-assembled monolayers. These allow specific lectin carbohydrate interactions to be interrogated at the single molecule level via AFM. The force required to directly rupture the multivalent bonds between Concanavalin A (Con A) and mannose were subsequently determined by chemical force microscopy. The mixed self-assembled monolayer provides a versatile platform with active groups to attach a 1-amino-1-deoxy sugar or a protein (Con A) while minimizing non-specific adhesion enabling quick and reliable detection of rupture forces. By altering the pH of the environment, the aggregation state of Con A was regulated, resulting in different dominant rupture forces, corresponding to di-, tri- and multiple unbinding events. We estimate the value of the rupture force for a single Con A-mannose bond to be 95 ± 10 pN. The rupture force is consistent even when the positions of the binding molecules are switched. We show that this synthesis strategy in conjunction with a mixed SAM allows determination of single molecules bond with high specificity, and may be used to investigate lectin carbohydrate interactions in the form of carbohydrate arrays as well as lectin arrays.     

Detection of Lectins by Saccharide-gold Nanoparticle Conjugates

A general functionalization strategy was reported, which enables one to conjugate saccharide(SA) on gold nanoparticle(GNP) surface without affecting SA properties. First, disulfide phenylboronic acid(Bor) functionalized GNPs(Bor@GNPs) were synthesized by the reaction of citrate stabilized GNPs of 13 nm in diameter with the mixture of Bor and pentapeptide(Cys-Ala-Leu-Asn-Asn, CALNN). Subsequently, the SA-GNP conjugates(SA@GNPs) were prepared by coupling SA to the GNP surface via the reaction of phenylboronic acid(PBA) with the cis-diol configuration in SA. The interactions of three SA@GNPs with three lectins have been analyzed by UV-visible spectroscopic and transmission electronic microscopic(TEM) techniques, respectively. The experimental results demonstrate that SA@GNPs can efficiently bind to lectins and show a great promise as optical probes for monitoring specific affinities of lectins for SA, and detecting lectins with high sensitivity.     

Quantitative evaluation of lectin‐reactive glycoforms of α1‐acid glycoprotein using lectin affinity capillary electrophoresis with fluorescence detection

α₁‐Acid glycoprotein (AGP) was previously shown to be a marker candidate of disease progression and prognosis of patients with malignancies by analysis of its glycoforms via lectins. Herein, affinity capillary electrophoresis of fluorescein‐labeled AGP using lectins with the aid of laser‐induced fluorescence detection was developed for quantitative evaluation of the fractional ratios of concanavalin A‐reactive or Aleuria aurantia lectin‐reactive AGP. Labeled AGP was applied at the anodic end of a fused‐silica capillary (50 μm id, 360 μm od, 27 cm long) coated with linear polyacryloyl‐β‐alanyl‐β‐alanine, and electrophoresis was carried out for about 10 min in 60 mM 3‐morpholinopropane‐1‐sulfonic acid‐NaOH buffer (pH 7.35). Addition of the lectins to the anode buffer resulted in the separation of lectin‐reactive glycoform peaks from lectin‐non‐reactive glycoform peaks. Quantification of the peak area of each group revealed that the percent of lectin‐reactive AGP is independent of a labeling ratio ranging from 0.4 to 1.5 mol fluorescein/mol AGP, i.e. the standard deviation of 0.5% for an average of 59.9% (n=3). In combination with a facile procedure for micro‐purification of AGP from serum, the present procedure, marking the reactivity of AGP with lectins, should be useful in determining the prognosis for a large number of patients with malignancies.     

Adsorption of concanavalin A and lentil lectin on platinum electrodes followed by electrochemical impedance spectroscopy: effect of protein state

Adsorption of concanavalin A and lentil lectin on platinum electrode was investigated through electrochemical impedance spectroscopy and cyclic voltammetry. By using ferro/ferricyanide system to probe the electrochemical interface it was possible to model the EIS data with a simple equivalent circuit. The blocking effect for electron transfer reactions observed with these proteins, indicated that they readily adsorb on platinum surface and that the degree of adsorption is related to the state of the proteins. When the proteins are in the presence of divalent cations (Ca²⁺ and Mn²⁺) they adsorb less strongly than in their absence. There is also evidence that at least convanavalin A retains its biological activity in the adsorbed state.     

Evaluation of concanavalin A-mannose interaction on the electrode covered with collagen film

An electrode covered with a lectin/collagen film was constructed to investigate whether the film was usable as a reaction field of binding between the lectin and sugar. The protein-sugar binding on cell surface plays an important role to various physiologic processes. The film is considered to be a cell surface, due to its biocompatibility. The immobilization of concanavalin A (Con A) which is one of proteins was attempted by an electrostatic interaction of the protonated functional groups of film to the negative charged Con A. The merit of this immobilization is that the interaction hardly causes any changes in the protein structure. Because Con A recognizes mannose moiety, the mannose was labeled with an electroactive compound. The binding was estimated from the changes of the electrode response based on the holding of electroactive moiety in the binding site of Con A to the mannose moiety. However, the electrode responses of glucose and galactose labeled with the same substance did not change. The result shows that Con A is immobilized on the film and combines with labeled mannose. Therefore, it is clear that the collagen film is suitable as the reaction field to evaluate the protein-sugar binding.     

Ring‐opening metathesis polymerization‐derived,lectin‐functionalized monolithic supports for affinity separation of glycoproteins

Lectin‐functionalized monolithic columns were prepared within polyether ether ketone (PEEK) columns (150 × 4.6 mm id) via transition metal‐catalyzed ring‐opening metathesis polymerization of norborn‐2‐ene (NBE) and trimethylolpropane‐tris(5‐norbornene‐2‐carboxylate) (CL) using the first‐generation Grubbs initiator RuCl₂(PCy₃)₂(CHPh) (1, Cy = cyclohexyl) in the presence of a macro‐ and microporogen, i.e. of 2‐propanol and toluene. Postsynthesis functionalization was accomplished via in situ grafting of 2,5‐dioxopyrrolidin‐1‐yl‐bicyclo[2.2.1]hept‐5‐ene‐2‐carboxylate to the surface of the monoliths followed by reaction with α,ω‐diamino‐poly(ethyleneglycol). The pore structure of the poly(ethyleneglycol)‐ derivatized monoliths was investigated by electron microscopy and inverse‐size exclusion chromatography, respectively. The amino‐poly(ethyleneglycol) functionalized monolithic columns were then successfully used for the immobilization of lectin from Lens culinaris hemagglutinin. The thus prepared lectin‐functionalized monoliths were applied to the affinity chromatography‐based purification of glucose oxidase. The binding capacity of Lens culinaris hemagglutinin‐immobilized monolithic column for glucose oxidase was found to be 2.2 mg / column.     

Binding of Ricinus communis agglutinin to a galactose-carrying polymer brush on a colloidal gold monolayer

A polymer with many pendent galactose residues was prepared by atom-transfer radical polymerization (ATRP) of galactose-carrying vinyl monomer, 2-lactobionamidoethyl methacrylate (LAMA), with a disulfide-carrying ATRP initiator, 2-(2'-bromoisobutyroyl)ethyl disulfide (DT-Br). The galactose-carrying polymer obtained (DT-PLAMA) was accumulated as a polymer brush via Au-S bond on a colloidal gold monolayer deposited on a cover glass. For comparison, a disulfide which carried one galactose residue at both ends (2-lactobionamidoethyl disulfide, Cys-Lac) was accumulated as a self-assembled monolayer (SAM) on the colloidal gold monolayer, too. The association and dissociation processes of galactose residues on the colloidal gold with a lectin, Ricinus communis agglutinin (RCA(120)), were observed by the increase and decrease in absorbance at 550nm corresponding to localized surface plasmon resonance (LSPR) phenomena. The Cys-Lac SAM-carrying glass chip showed a strong non-specific adsorption of the lectin, whereas the DT-PLAMA brush-carrying one reversibly associated with the lectin, indicating reusability of the latter device. The apparent association constant of the lectin with the galactose residues in the DT-PLAMA brush was much larger than the association constant for free galactose, and the detection limit of RCA(120) by the glycopolymer brush-modified device was satisfactorily low. Furthermore, a microscopic observation clearly indicated that the DT-PLAMA brush could reversibly associate with a HepG2 cell having galactose receptors, though these processes could not be observed spectrophotometrically due to a gigantic size of the cell.