Lead(II) complexes of 2,2′-diamino-4,4′-bithiazole (DABTZ) including crystal structure of a novel 1D chain polymer, [PB(DABTZ)(μ-SCN)(μ-NO3)] n

Three new 2,2′-diamino-4,4′-bithiazole (DABTZ) lead(II) complexes were synthesized and characterized by elemental analyses, IR-, ¹H-NMR-, and ¹³C-NMR-spectroscopy. The single crystal X-ray structural analysis of [Pb(DABTZ)(μ-SCN)(μ-NO₃)] _n shows the complex to be a 1D chain polymer as a result of sequential thiocyanate and nitrate bridging. The Pb atoms are seven-coordinated by two nitrogen atoms of the 2,2′-diamino-4,4′-bithiazole, three nitrate and two thiocyanate ligands. The arrangement of the 2,2′-diamino-4,4′-bithiazole, nitrate and thiocyanate ligands does not suggest a gap in the coordination around the Pb^II ion, caused by a stereo-active lone pair of electrons on lead(II) where the coordination around the lead atoms is the less common holodirected.     

A Quick Color Test to Detect Lead Release From Glazed Ceramic and Enameled Metalware

Abstract

A color test is presented for the purpose of quickly identifying glazed ceramic and/or enameled metalware which releases excessive Pb. Citric acid solution on filter paper is used to extract Pb from the ware and a Pb-sensitive chromogen indicates the presence of Pb on the paper. The quick color test takes approximately 30 min and is useful for screening ware to determine the need for testing by the 24-h method of the Association of Official Analytical Chemists/American Society for Testing and Materials.     

Distorted Phthalocyanines by Click Chemistry: Photoacoustic,Photothermal, and Surface-Enhanced Resonance Raman Studies

Distortion of nominally planar phthalocyanine macrocycles affects the excited state dynamics in that most of the excited-state energy decays through internal conversion. A click-type annulation reaction on a perfluorophthalocyanine platform appending a seven-membered ring to the β-positions on one or more of the isoindoles distorts the macrocycle and modulates solubility. The distorted derivative enables photoacoustic imaging, photothermal effects, and strong surface-enhanced resonance Raman signals.     

Photophysics of Silicon Phthalocyanines in Aqueous Media

Phthalocyanines have been used as photodynamic therapy (PDT) agents because of their uniquely favorable optical properties and high photostability. They have been shown to be highly successful for the treatment of cancer through efficient singlet‐oxygen (¹O₂) production. However, due to their hydrophobic properties, the considerations of solubility and cellular location have made understanding their photophysics in vitro and in vivo difficult. Indeed, many quantitative assessments of PDT reagents are undertaken in purely organic solvents, presenting challenges for interpreting observations during practical application in vivo. With steady‐state and time‐resolved laser spectroscopy, we show that for axial ligated silicon phthalocyanines in aqueous media, both the water:lipophile ratio and the pH have drastic effects on their photophysics, and ultimately dictate their functionality as PDT drugs. We suggest that considering the presented photophysics for PDT drugs in aqueous solutions leads to guidelines for a next generation of even more potent PDT agents.     

Determination of Lead(II) Using Screen‐Printed Bismuth‐Antimony Film Electrode

This work presents a disposable bismuth‐antimony film electrode fabricated on screen‐printed electrode (SPE) substrates for lead(II) determination. This bismuth‐antimony film screen‐printed electrode (Bi‐SbSPE) is simply prepared by simultaneously in situ depositing bismuth(III) and antimony(III) with analytes on the homemade SPE. The Bi‐SbSPE can provide an enhanced electrochemical stripping signal for lead(II) compared to bismuth film screen‐printed electrodes (BiSPE), antimony film screen‐printed electrodes (SbSPE) and bismuth‐antimony film glassy carbon electrodes (Bi‐SbGC). Under optimized conditions, the Bi‐SbSPE exhibits attractive linear responses towards lead(II) with a detection limit of 0.07 µg/L. The Bi‐SbSPE has been demonstrated successfully to detect lead in river water sample.     

Simultaneous Anodic Stripping Voltammetric Determination of Pb and Cd,Using a Vibrating Gold Microwire Electrode,Assisted by Chemometric Techniques

Simultaneous anodic stripping voltammetric determination of Pb and Cd is restricted on gold electrodes as a result of the overlapping of these two peaks. This work describes the quantitative determination of a binary mixture system of Pb and Cd, at low concentration levels (up to 15.0 and 10.0 µg L^?1 for Pb and Cd, respectively) by differential pulse anodic stripping voltammetry (DPASV; deposition time of 30 s), using a green electrode (vibrating gold microwire electrode) without purging in a chloride medium (0.5 M NaCl) under moderate acidic conditions (HCl 1.0 mM), assisted by chemometric tools. The application of multivariate curve resolution alternating least squares (MCR‐ALS) for the resolution and quantification of both metals is shown. The optimized MCR‐ALS models showed good prediction ability with concentration prediction errors of 12.4 and 11.4 % for Pb and Cd, respectively. The quantitative results obtained by MCR‐ALS were compared to those obtained with partial least squares (PLS) and classical least squares (CLS) regression methods. For both metals, PLS and MCR‐ALS results are comparable and superior to CLS. For Cd, as a result of the peak shift problem, the application of CLS was unsuitable. MCR‐ALS provides additional advantage compared to PLS since it estimates the pure response of the analytes signal. Finally, the built up multivariate calibration models, based either in MCR‐ALS or PLS regression, allowed to quantify concentrations of Pb and Cd in surface river water samples, with satisfactory results.     

Evaluation of a platinum electrode modified with hydroxyapatite in the lead(II) determination in a square wave voltammetric procedure

The behavior of a modified carbon platinum electrode (Pt) for lead(II) determination by square wave voltammetry (SWV) was studied. The modified electrode is obtained by electrodeposition of hydroxyapatite (HAP) on the surface of a bare platinum electrode. The new electrode (HAP/Pt) revealed interesting electroanalytical detection of lead(II) based on the adsorption of this metal onto hydroxyapatite under open circuit conditions. After optimization of the experimental and voltammetric conditions, the best voltammetric responses-current intensity and voltammetric profile were obtained in 0.2 mol L^?1 KNO₃ with: 30 min accumulation time, 5 mV pulse amplitude and 1 mV s^?1 scan rate. The observed detection (DL, 3σ) and quantification (DL, 10σ) limits in pure water were 2.01 × 10^?8 and 6.7 × 10^?7 mol L^?1, respectively. The reproducibility of the proposed method was determined from five different measurements in a solution containing 2.2 × 10^?6 mol L^?1 lead(II) with a coefficients of variation of 2.08%.The electrochemical of hydroxyapatite at platinum surfaces was characterized, after calcinations 900 °C, by X-ray diffraction, infrared spectroscopy, chemical and electrochemical analysis.     

On-line liquid phase micro-extraction based on drop-in-plug sequential injection lab-at-valve platform for metal determination

A novel automatic on-line liquid phase micro-extraction method based on drop-in-plug sequential injection lab-at-valve (LAV) platform was proposed for metal preconcentration and determination. A flow-through micro-extraction chamber mounted at the selection valve was adopted without the need of sophisticated lab-on-valve components. Coupled to flame atomic absorption spectrometry (FAAS), the potential of this lab-at-valve scheme is demonstrated for trace lead determination in environmental and biological water samples. A hydrophobic complex of lead with ammonium pyrrolidine dithiocarbamate (APDC) was formed on-line and subsequently extracted into an 80 μL plug of chloroform. The extraction procedure was performed by forming micro-droplets of aqueous phase into the plug of the extractant. All critical parameters that affect the efficiency of the system were studied and optimized. The proposed method offered good performance characteristics and high preconcentration ratios. For 10 mL sample consumption an enhancement factor of 125 was obtained. The detection limit was 1.8 μg L⁻¹ and the precision expressed as relative standard deviation (RSD) at 50.0 μg L⁻¹ of lead was 2.9%. The proposed method was evaluated by analyzing certified reference materials and applied for lead determination in natural waters and urine samples.     

Synthesis of Metal‐Free Phthalocyanines in Functionalized Ammonium Ionic Liquids

A convenient, fast, efficient, and ecofriendly synthesis of metal‐free phthalocyanines from various substituted phthalonitriles in different hydroxyalkylammonium ionic liquids in the presence of 1,8‐diazabicyclo‐[5,4,0]‐undec‐7‐ene (DBU) is reported in moderate yields. The effect of concentration of DBU and temperature on the synthesis of phthalocyanine in N‐(2‐hydroxyethyl)‐N,N‐dimethylbutylammonium bromide ionic liquid has been examined, and the ionic liquid has been recovered and reused conveniently.