(Mn1−xPbx)Pb10+ySb12−yS26−yCl4+yO, a new oxy-chloro-sulfide with ∼2 nm-spaced (Mn,Pb)Cl4 single chains within a waffle-type crystal structure

The new oxy-chloro-sulfide (Mn_1−xPb_x)Pb_10+ySb_12−yS_26−yCl_4+yO (x ∈ [0.2-0.3]; y ∈ [0.3-1.6]) was synthesized by dry way at 500-600 °C. A single crystal ∼Mn_0.7Pb_11.0Sb_11.3S_25.3Cl_4.7O indicates a monoclinic symmetry, space group C2/m, with a = 37.480(8), b = 4.1178(8), c = 18.167(4) Å, β = 106.37(3)°, V = 2690.2(9) Å³, Z = 2. Its crystal structure was determined by X-ray single crystal diffraction, with a final R = 5.11%. Modular analysis of the crystal structure reveals a “waffle” architecture, where complex rods with lozenge section delimitate an internal channel filled by a single chain of (Mn_0.7Pb_0.3)Cl₆ octahedra connected by opposite edges. Minimal inter-chain distances are close to 18 Å. The rod wall, two-atom thick, presents, in alternation with S atoms, Pb or (Pb,Sb) cations with prismatic coordination in the internal atom layer, while the external atom layer is constituted exclusively by Sb cations with dissymmetric square pyramidal coordination. A (Pb,Sb)₂S₂ fragment connects two successive rods along (2 0 1) to form a waffle-type palissadic layer. The unique O position, half filled, presents the same environment than the isolated O positions in the oxy-sulfide Pb₁₄Sb₃₀S₅₄O₅, or oxy-chloro-sulfides Pb₁₈Sb₂₀S₄₆Cl₂O and (Cu,Ag)₂Pb₂₁Sb₂₃S₅₅ClO. This compound belongs to a pseudo-homologous series of chalcogenides with waffle structure, ordered according to the size of their lozenge shape channel. Such a complex senary compound of the oxy-chloro-sulfide type illustrates the structural competition between three cations, on one hand, and, on the other hand, three anions. This compound is of special interest regarding the 1D distribution of magnetic Mn²⁺ atoms at the ∼2 nm scale.     

Precipitation and characterization of uniform submicrometer lead titanate particles. Part II: Reaction mechanism

The chemical mechanism of the precipitation of lead titanium peroxohydroxide particles in a solution of nitrilotriacetate (NTA) complexes of lead and titanium peroxo-hydroxide is envisioned as the interaction between cations of lead hydroxide and anions of polymeric titanium peroxo-hydroxide.     

Scanning probe microscopy studies of PbS surfaces oxidized in air and etched in aqueous acid solutions

Natural n-type PbS single crystals have been studied using AFM, STM and STS after long-term oxidation in air at ambient temperatures and extensive etching in aqueous acid solutions, in contrast to previous work devoted to initial corrosion of fresh surfaces. The exposure of PbS to atmosphere at high relative humidity for several days yields widespread loose oxidation products; the process is much slower at low humidity. Surface morphologies diverge after the treatment in 1 M perchloric and hydrochloric acid solutions at room temperature and become widely different at elevated temperatures, displaying commonly etch pits up to several micrometers in size and depth along with rather uniformly distributed 20-100 nm protrusions of PbS phase. The changes both in topography and semiconducting properties of PbS found by tunneling spectroscopy have been explained in terms of the non-uniform distribution of donor- and acceptor-type defects D⁺/D⁻ in the metal depleted surface layer, which are generated by chemical reactions and, in turn, determine the rates of the PbS corrosion. In particular, the D⁻ centers exhibit a self-catalyzing effect on the non-oxidative local dissolution of PbS in HCl media, resulting in the deep etch pits.     

一次消解测定蔬菜中多种重金属的简捷方法

针对一般实验室检测人员少,检测任务重的问题,研究了蔬菜通过一次湿化消解后,消解液可以测定多种重金属元素的方法,大大提高了效率,减轻了工作量.     

Basic principles of technological shaping of optical properties and radiation hardness of PWO crystals

Technological conditions ensuring growth of optically homogeneous lead tungstate (PWO) crystals are reported. It is shown that the basic scintillator characteristics of PWO grown from highly purified raw material and properly doped with lanthanides are mainly determined by inclusions of oxides W_1−yL_yO_3−x (L=Y, La, Gd; 0<x<0.3). Moreover, surface-located inclusions with structure close to tungstenite may also be of importance. It is demonstrated that the scintillation properties can be intentionally designed by varying the oxygen content in the inclusions x and the surface structure. The optimal value for x and the most favorable surface structure are achieved by proper thermal regimes and environment content during the crystal annealing. The results enabled low-cost fabrication of PWO scintillators with steady and reproducible characteristics acceptable for the CERN project ALICE and ensured production of PWO on an industrial scale by “North Crystals” company at a rate of 125–135 crystals per year from every growth apparatus.     

Influence of the light illumination on thermoluminescence properties of PbWO4

The thermally stimulated properties of PbWO₄ in the temperature range 90–400 K have been investigated on undoped and terbium-doped crystals after X-ray irradiation at 90 K. Doping with terbium changes the concentration of shallow traps, which are responsible for retrapping free electrons and holes. Light illumination can change the distribution of the traps. The optically stimulated luminescence is observed. The influence of light illumination on the TSL curves and emission properties is studied. The possible mechanism of TSL phototransformation is discussed.     

Chemical Speciation of Amphoteric Ions on Semi‐Dry Scrubber Residue and Bag‐House Ash from MSWI

Two series of size‐fractionated combusted residues, a bag‐house ash and a scrubber residue, from a municipal solid waste incinerator (MSWI) were prepared and extracted by means of sequential chemical extraction (SCE) procedures proposed by Tessier. Concentrations of water‐soluble phase, exchangeable phase, carbonated phase, Fe/Mn oxide phase, organic matter phase, and residual phase bound amphoteric metals (Pb and Zn) were obtained, and have been compared with those of single batch extraction of toxic characteristic leaching procedure (TCLP). In each size fraction of baghouse ash or scrubber residue, lead or zinc shows a common phenomena that the TCLP value is always lower than the content of the water‐soluble fraction. For lead, baghouse ash has a significant size‐dependent distribution on the water‐soluble phase to perform a size‐dependent test of lead in the TCLP test. The zinc TCLP data having less size dependence might be due to that neither the baghouse ash nor the scrubber residue has a size‐dependent distribution on the water‐soluble zinc phase.     

慢性铅中毒一例

详细问诊，为诊断慢性铅中毒提供了重要依据。     

Optimization of a portable microanalytical system to reduce electrode fouling from proteins associated with biomonitoring of lead (Pb) in saliva

There is a need to develop reliable portable analytical systems for on-site and real-time biomonitoring of lead (Pb) from both occupational and environmental exposures. Saliva is an appealing matrix since it is easily obtainable, and therefore a potential substitute for blood due to existing reasonably good correlation between Pb levels in blood and saliva. The microanalytical system is based on flow-injection/stripping voltammetry with a wall-jet (flow-onto) microelectrochemical cell. Samples that contain as little as 1% saliva can cause electrode fouling, resulting in significantly reduced responsiveness and irreproducible quantitations. In addition, incomplete Pb release from salivary protein can also yield a lower Pb response than expected. This paper evaluates the extent of in vitro Pb-protein binding and the optimal pretreatment for releasing Pb from the saliva samples. Even in 50% by volume of rat saliva, the electrode fouling was not observed, due to the appropriate sample pretreatment and the constant flow of the sample and acidic carrier that prevented passivation by the protein. The system offered a linear response over a low Pb range of 1-10 ppb, low detection limit of 1 ppb, excellent reproducibility, and reliability. It also yielded the same Pb concentrations in unknown samples as did the ICP-MS. These encouraging results suggest that the microanalytical system represents an important analytical advancement for real-time non-invasive biomonitoring of Pb.     

A study on the utility of bismuth-film electrodes for the determination of In(III) in the presence of Pb(II) and Cd(II) by square wave anodic stripping voltammetry

This work is an investigation into the utility of bismuth-film electrodes (BiFEs) for the determination of indium in the presence of cadmium and lead by square wave anodic stripping voltammetry (SWASV). The purpose of this study was to demonstrate that, after judicious choice of the associated chemical and instrumental conditions, it is possible to achieve satisfactory separation of the relevant stripping peak and, thus, to determine simultaneously trace concentrations of cadmium, lead and indium. It was conclusively demonstrated that a BiFE performed better than the equivalent mercury-film electrode (MFE) in this particular application.