Residence times in kink sites and Markov chain model of alloy and intermetallic compound deposition

The concept of the residence time τ_ksp of an atom in a kink site has recently been suggested to understand the processes in electrochemical deposition of alloys and intermetallic compounds. Different kink sites with different residence times must be defined for alloys and intermetallic compounds. Based on this model, the finite Markov chain theory is applied to describe the selectivity of the growth process. An analytical relationship between the alloy composition and the metal ion concentrations in the electrolyte is derived. General model parameters are ratios g _i = K _ii/K _ij of equilibrium constants of the reaction of electrolyte ions with different kink sites on the surface (i, j representing different alloy components). These ratios are called selectivity constants. For simple conditions, the equation g _i ≈ τ_ii/τ_ij connects the g _i values with the residence times. The theory is tested in the deposition of alloys Co-Ni (anomalous co-deposition) and Ni-Mo (induced co-deposition). Additionally, Bi₂Te₃, an example of stoichiometric semiconductor deposition, is treated. Published in Russian in Elektrokhimiya, 2006, Vol. 42, No. 10, pp. 1216–1223. The text was submitted by the authors in English.     

Hydrogen peroxide in basic media for whole blood sample dissolution for determination of its lead content by electrothermal atomization atomic absorption spectrometry

Hydrogen peroxide in basic media is proposed as a means for dissolving whole blood samples to be analyzed by electrothermal atomization atomic absorption spectrometry, ET AAS. Approximately 2 g of the whole blood sample were directly weighed in a 150 mL volumetric flask; 3 mL of a NaOH 0.2 mol L⁻¹ solution, two drops of 1-octanol, as an antifoaming agent, and 1 mL of 30% volume hydrogen peroxide were added to the flask to promote oxidation. The solution was then manually shaken and after approximately three minutes of shaking, a clear solution, with no apparent suspended solids or greasy layers, was obtained. Distilled-deionized water was used to complete the volume. Ten μL of the resulting solution along with 10 μL of a solution containing 5000 mg L⁻¹ of NH₄H₂PO₄ and 300 mg L⁻¹ of Mg(NO₃)₂ as a modifier, were injected into transversely heated graphite tubes for lead determination. Both aqueous standards and standard addition calibration curves produced results not significantly different at a 95% confidence limit level. Accuracy of the measurements was assessed by analysis of the IAEA A-13 (concentration of trace and minor elements in freeze dried animal blood) standard reference material containing 0.18 mg L⁻¹ lead on a dry basis and by means of recovery tests. Analysis of the IAEA A-13 standard produced 0.17 ± 0.02 mg L⁻¹ lead on a dry basis; recovery tests afforded values from 95 to 105%. Ten consecutive measurements of a 5 ppb lead solution gave a characteristic mass of 47.2 pg and a (3S) detection limit of 1.77 μg L⁻¹ Pb. Results obtained from analysis of whole blood samples of volunteer donors covered a lead concentration range between 8 and 21 μg L⁻¹ with a mean value of 11.9 ± 4.7 μg L⁻¹.     

计算金属间化合物热力学性质的新方法

用一简单的相关函数式对金属间化合物的热力学性质进行拟合，提出了一种计算金属间化合物热力学性质的新方法，并用此方法计算了二元金属间化合物的常温热容和熵。计算结果表明，该方法简单，且能满足一定的计算精度，有一定的实用价值。     

膦取代的羰基铂簇的合成,结构和性质

Pt(PPh_3)_2Cl_2在碱性介质中,与一氧化碳直接进行还原及羰基化反应,得到五种膦取代的羰基铂配合物:Pt_5(μ_2-CO)_5(CO)(PPh_3)_4 1,Pt_3(μ_2-CO)_3(PPh_3)_3 2,Pt_3(μ_2-CO)_3(PPh_3)_4 3,Pt_4(μ_2-CO)_5(PPh_3)_4 4,以及Pt(Cl)(PPh_3)_2(COOCH_3) 5。经X-射线单晶衍射分析,确定了新的三核铂羰基簇2以及配合物5的分子结构。还讨论了1和5的生成机理。     

Fabrication of lead titanate single crystalline nanowires by hydrothermal method and their characterization

Single crystalline nanowires of lead titanate (PbTiO₃) were fabricated by hydrothermal method at 200°C using lead acetate and n-tetrabutyl titanate as starting materials, where sodium hydroxide was served as a mineralizer. Crystalline phases, microstructure and optical properties of PbTiO₃ nanowires were investigated. The PbTiO₃ nanowires were uniform and continuous along the long axis, and were composed of single crystalline PbTiO₃ with a tetragonal perovskite structure. The diameter of a single nanowire was around 12 nm and the length reached up to 3 μm. The chemical composition of the samples and the valence states of elements were determined by X-ray photoelectron spectroscopy (XPS). The ultraviolet/visible absorption spectroscopic investigation suggested that the absorption edge of optical transition of the first excitonic state occurred at around 320 nm. A blue-green light emission peaking at about 471 nm (2.63 eV) is observed at room temperature, and the intensity of this emission increased with increasing excitation wavelength. Oxygen vacancies are responsible for the light emission of PbTiO₃ nanowires.     

Preparation of cellulose and cellulose derivative azo compounds

Wood pulp and cotton linter are the most common sources of cellulose forindustrial use. Methyl cellulose (MC) and cellulose sulfate (CS) were preparedusing bleached wood pulp and cotton linter. Coloured azo compounds were alsoprepared from coupling cellulose, wood pulp, MC and CS with aromatic diazoniumsalt. The presence of electron-releasing or withdrawing substituents affectedthe electrophilic substitution reaction. The produced azo compounds werecharacterized by FT-IR methodology, as well as mass spectrometry, in which thefunctional groups and the ion fragments of the products were analyzed.     

以钛氧有机物为前驱物制备具有高光催化活性的纳米二氧化钛晶体

 纳米二氧化钛的制备方法及前驱物的差别影响其光催化活性．将20ml钛酸丁酯及30ml乙酐在密闭容器中与50ml环己烷混合，在70～85℃反应30min，生成微细的非晶钛氧有机物；经FT－IR和TGA分析，该物质被确认为计量式是TiOOOCCH3）2和TiO（OC4H9）（OOCCH3）的混合体．该钛氧有机物前驱物经焙烧后得到具有高光催化活性的纳米二氧化钛晶体．表征结果表明，钛氧有机物在焙烧过程中，其表面的吸附物及键合有机基团在400℃以前发生脱附和氧化分解；在389～405℃间形成锐钛矿型晶体，在600℃出现金红石晶型；600℃焙烧3h所得样品的比表面积为86m2／g，其二次粒子呈200～300nm条形体，孔隙大于20nm；单分散粒子为球形单晶，粒径为22nm；表面物理吸附水量为1．21％，加热至800℃时失重1．48％，粉体稳定纯净．光催化实验结果表明，以钛氧有机物为前驱物制备的纳米二氧化钛晶体具有高的光催化活性，光降解丁基罗丹明溶液的反应速率常数约为溶胶－凝胶法制备的催化剂样品的4倍．表面氧空缺和一定量的表面羟基可能是粉体具有高光催化活性的重要因素．     

Syntheses, crystal structures and magnetic properties of a new nitronyl nitroxide NIT2-bithph and its manganese(II) compound [Mn(hfac)2(IMHBithph)]2·(NIT2-bithph)(C6H14)

A new nitronyl nitroxide NIT2-bithph (1) and its manganese(II) compound [Mn(hfac)₂(IMHBithph)]₂·(NIT2-bithph)(C₆H₁₄) (2) (hfac = hexafluoroacetylacetonate; NIT2-bithph = 4,4,5,5-tetramethyl-2-(bithiophenal-2-yl)imidazoline-1-oxyl-3-oxide; IMHBithph = 1-hydroxy-2-bithiophenal-4,4,5,5-tetramethyl-4,5-dihydro- 1H-imidazole) have been synthesized and structurally characterized by X-ray diffraction methods. The units of compound 1 were connected as one-dimensional chain by the intermolecular hydrogen bonds which afford an intermolecular antiferromagnetic interaction between nitronyl nitroxide radicals within the chain (J = −1.89 cm⁻¹). Compound 2 resulting from the reaction of Mn(hfac)₂·2H₂O and NIT2-bithph is dinuclear and includes the reduced amidino-oxide form of NIT2-bithph, it is made up of three parts: a [Mn(hfac)₂(IMHBithph)]₂ dimer unit, an uncoordinated NIT2-bithph radical and a noncoordinated solvent molecule of hexane, the molecule of radical is hydrogen bonded to its reduced form. Two reduced IMHBithph ligands bridge the two manganese(II) ions through their amidino-oxide oxygen atoms resulting in a small intramolecular antiferromagnetic interaction between the manganese ions (J = −1.55 cm⁻¹).     

Spectrophotometric determination of lead in vegetables with dibromo-p-methyl-carboxysulfonazo

A new highly sensitive and selective chromogenic reagent dibromo-p-methyl-carboxysulfonazo (DBMCSA) was synthesized and studied for the spectrophotometric determination of lead in detail. In 0.25 M phosphoric acid medium, which greatly increases the selectivity, lead reacts with DBMCSA to form a 1:2 blue complex, having a sensitive absorption peak at 648 nm. Under the optimal conditions, Beer's law is obeyed over the range from 0 to 0.8 μg ml⁻¹ Pb(II) and the apparent molar absorptivity is 1.04×10⁵ l mol⁻¹ cm⁻¹. The detection limit and the variation coefficient were found to be 2.14 ng ml⁻¹ and 1.0%, respectively. It is found that, except for Ca(II) and Ba(II), all foreign ions studied do not interfere with determination. The interference caused by Ca(II) and Ba(II) can be easily eliminated by prior extraction with potassium iodide-methylisobutylketone. The method has been applied to the determination of lead in vegetables with satisfactory results.     

羊睾丸,梅花鹿胎盘提取液中铅的测定

利用火焰原子吸收法直接测定羊睾丸，梅花鹿胎盘提取液中铅的含量，实验结果表明，两种提以液中均含有铅，梅花鹿胎盘提取液铅含量低于羊睾丸，透析液组高于超滤液组，这一结果为合理开发利用羊睾丸，梅花鹿胎盘提取液提供一定的数据。