Slurry sampling for determination of lead in marine plankton by electrothermal atomic absorption spectrometry

A slurry sampling method has been developed for the determination of Pb in marine plankton by ETAAS using a freshwater plankton certified reference material (CRM 414). Slurries were prepared in 1–3% m/v range with 1% v/v HNO₃ by ultrasonic agitation for 5 min. The effects of several chemical modifiers, including Ir(NO₃)₂, Mg(NO₃)₂, Pd(NO₃)₂, Pd(NO₃)₂ + Mg(NO₃)₂, and Mg(NO₃)₂ + NH₄H₂PO₄, were investigated for the stabilization of Pb during thermal pretreatment. Lead in slurries was effectively stabilized up to 1000 °C with Ir, Pd and Pd + Mg modifiers among which Pd + Mg provided the best results with complete atomization at 1850 °C. Firings in the presence of Ir were, problematic due to ash formation inside the atomizer. Water, dilute HNO₃ and HF were examined as suspension medium. Dilute HNO₃ (1–2% v/v) proved to be advantageous over water as it afforded extraction of Pb from plankton almost quantitatively in 5 min agitation. Hydrofluoric acid was the least suitable medium. Increasing HF concentration up to 5% v/v resulted in inaccuracy and substantial background absorption. Fast-heating furnace method provided comparable accuracy and precision to that of conventional-heating in slurries of CRM 414. Detection limits and characteristic masses were, respectively, 0.49 μg L^− 1 and 32 pg for the conventional method and 0.62 μg L^− 1 and 37 pg for the fast-heating method. However, fast-heating approach suffered from distorted peaks at high temperatures and incomplete pyrolysis of matrix at lower temperatures. Analysis of marine plankton samples for Pb was performed by using the conventional furnace program. The results showed a high correlation with those obtained by solution ICP-MS. Differences were statistically insignificant within 95% confidence interval.     

Coupling continuous ultrasound-assisted extraction, preconcentration and flame atomic absorption spectrometric detection for the determination of cadmium and lead in mussel samples

Continuous ultrasound-assisted extraction has been coupled with preconcentration and flame atomic absorption spectrometry for the determination of cadmium and lead in mussel samples. Experimental designs were used for the optimisation of the leaching and preconcentration steps. The use of diluted nitric acid as extractant in the continuous mode at a flow rate of 3.5 ml min⁻¹ and room temperature was sufficient for quantitative extraction of these trace metals. A minicolumn containing a chelating resin (Chelite P, with aminomethylphosphoric acid groups) was proved as an excellent material for the quantitative preconcentration of cadmium and lead prior to their flame atomic absorption detection. A flow injection manifold was used as interface for coupling the three analytical steps, which allowed the automation of the whole analytical process. A good precision of the whole procedure (2.0 and 2.3%), high enrichment factors (20.5 and 11.8) and a detection limit of 0.011 and 0.25 μg g⁻¹ for cadmium and lead, respectively, were obtained for 80 mg of sample. The sample throughputs were ca. 16 and 14 samples h⁻¹ for cadmium and lead, respectively. The accuracy of the analytical procedures was verified by using a standard reference material (BCR 278-R, mussel tissue) and the results were in good agreement with the certified values. The method was successfully applied to the determination of trace amounts of cadmium and lead in mussel samples from the coast of Galicia (NW, Spain).     

Factorial design in the optimization of preconcentration procedure for lead determination by FAAS

The present paper proposes a preconcentration procedure for lead determination using flame atomic absorption spectrometry (FAAS). It is based on lead(II) ions extraction as brilliant cresyl blue (BCB) complex and its sorption onto Diaion HP-2MG, a methacrylic ester copolymer. The optimization step was carried out using factorial design and the variables studied were pH, shaking time and reagent concentration. In the established experimental conditions, lead can be determinate with a limit of detection of 3.7 μg L⁻¹ lead (N = 20) and a relative standard deviation of 7% for a lead concentration of 100 μg L⁻¹. The accuracy was confirmed by analysis of a certified reference material, the stream sediment furnished by National Research Centre for Certified Reference Materials (NRCCRM), China (GBW 07310). Effect of other ions in the procedure proposed was also studied. The method was applied for lead determination in real samples of water, tea, soil and dust. Tests of addition/recovery in the experiments for lead determination in water samples revealed that the proposed procedure could be applied satisfactorily for analysis of these samples.     

An investigation on visible luminescence of Ho activated LBTAF glasses

Different concentrations of Ho³⁺-doped lead borate titanate aluminum fluoride (LBTAFHo) glasses with chemical composition of PbO-H₃BO₃-TiO₂-AlF₃-Ho₂O₃ were prepared by the melt quenching method. The spectral properties were investigated using the absorption, emission and decay measurements. The experimental oscillator strengths were calculated from the area under the absorption bands. Applying Judd-Ofelt theory, the intensity parameters (Ω_{λ=2, 4, 6}) were calculated, by the least square fit approach from which the radiative transition rates, luminescence branching ratios and radiative decay times were determined. The photoluminescence spectra revealed the quenching of luminescence intensity beyond 1.0 mol% of Ho³⁺ ion concentration. To investigate the luminescence potentiality of ⁵F₄→⁵I₈ emission level, the effective bandwidth and the stimulated emission cross-section were determined. The quenching in experimental decay time is attributed to the resonance energy transfer among the excited Ho³⁺ ions.     

Recent Decrease in the Lead Concentration of Antarctic Snow

Abstract

Differential Pulse Anodic Stripping Voltammetry (DPASV) was applied to determine the lead concentration in recent snow at two sites in the Victoria Land region, East Antarctica. Snow samples were collected during the 6th Italian Scientific Expedition to Antarctica (austral Summer 1990–91) along the wall of 2.5 m-deep hand-dug pits and by coring to a depth of about 11 m. The measurements revealed that lead content in Antarctic snow increased continuously from 1965 (about 3 pg/g) to the early 1980s (maximum about 8 pg/g), after which a marked, rapid decrease took place during the second half of 1980s, down to 2–4 pg/g in 1991. Estimates of the lead contributions from rocks and soils, volcanoes and the marine environment, together with analysis of statistical data on non-ferrous metal production and gasoline consumption, and the corresponding lead emissions into the atmosphere of the Southern Hemisphere, show that a net anthropogenic component is present and support the hypothesis that the trend observed in Antarctic snow may be related to lead consumption in gasoline, which firstly was on the rise, then declined owing to the increased use of unleaded gasoline.     

Solvothermal synthesis of PbTe/SnTe hybrid nanocrystals

PbTe/SnTe hybrid nanocrystals with designed shape, chemical composition and narrow size distribution were synthesized by an efficient solvothermal approach. This approach enables mass and economical synthesis of PbTe-based nanocrystals. The organic ligands were completely removed by pretreatment with a super-hydride solution, making it possible to fabricate fully dense and robust thermoelectric devices with increased electrical conductivity.     

Electronic transport study of PbSe pellets prepared from self-assembled 2D-PbSe nanostructures

This work presents a study of the electronic transport properties of PbSe pellets fabricated starting of PbSe nanostructures that exhibited a flake-like 2D morphology, which were synthesized by the co-precipitation method. Seebeck coefficient measurements revealed that the PbSe sample displays n-type conductivity, a maximum Seebeck coefficient of −512.6 μV/K around 380 K, and that the carriers scattering is dominated by acoustic and optical phonons. The Fermi level dependence on the temperature and the band gap energy are also reported. Interestingly, size-dependent confinement effects due probably to the reminiscent PbSe 2D character could be evidenced.     

Supramolecular lead(II) azide complex of 2,6-diacetylpyridine dihydrazone: synthesis,molecular structure,and biological activity

The complex of 2,6-diacetylpyridinedihydrazone (L) with lead(II) and azide has been characterized by elemental analyses, FTIR, and single-crystal X-ray analysis. The Pb(C₉H₁₃N₁₁) (1) crystallized in the monoclinic space group C2/c. The coordination of 1 exhibits a gap around the lead(II), possibly occupied by a stereochemically active electron lone pair on lead(II) resulting in a hemidirected complex. Antimicrobial activity of the complex is higher than the free ligand.     

Lead(II) complexes of 2,2′-diamino-4,4′-bithiazole (DABTZ) including crystal structure of a novel 1D chain polymer, [PB(DABTZ)(μ-SCN)(μ-NO3)] n

Three new 2,2′-diamino-4,4′-bithiazole (DABTZ) lead(II) complexes were synthesized and characterized by elemental analyses, IR-, ¹H-NMR-, and ¹³C-NMR-spectroscopy. The single crystal X-ray structural analysis of [Pb(DABTZ)(μ-SCN)(μ-NO₃)] _n shows the complex to be a 1D chain polymer as a result of sequential thiocyanate and nitrate bridging. The Pb atoms are seven-coordinated by two nitrogen atoms of the 2,2′-diamino-4,4′-bithiazole, three nitrate and two thiocyanate ligands. The arrangement of the 2,2′-diamino-4,4′-bithiazole, nitrate and thiocyanate ligands does not suggest a gap in the coordination around the Pb^II ion, caused by a stereo-active lone pair of electrons on lead(II) where the coordination around the lead atoms is the less common holodirected.     

A Quick Color Test to Detect Lead Release From Glazed Ceramic and Enameled Metalware

Abstract

A color test is presented for the purpose of quickly identifying glazed ceramic and/or enameled metalware which releases excessive Pb. Citric acid solution on filter paper is used to extract Pb from the ware and a Pb-sensitive chromogen indicates the presence of Pb on the paper. The quick color test takes approximately 30 min and is useful for screening ware to determine the need for testing by the 24-h method of the Association of Official Analytical Chemists/American Society for Testing and Materials.