Detection and assessment of citrus tristeza virus antigens by computer-aided scanning densitometry

Citrus tristeza virus (CTV) extracted from Etrog citron (C.medica L.) was immunoprecipitated. The immunoprecipitate was fractionated by SDS-PAGE and western blotted onto nitrocellulose. The CTV antigens were determined by immunoblot analysis using rabbit anti-CTV IgG, and the protein-band pattern exhibited on the nitrocellulose was assessed by soft-laser scanning densitometry. The densitometric tracing revealed the presence of bands that were not visible to the naked eye. Using the superimposition mode of the instrument, it was also revealed that the protein-band patterns of different CTV samples were not identical. Computer-aided soft-laser scanning densitometry proved to be a powerful approach in the detection and assessment of protein bands revealed on nitrocellulose immunoblots, which we were previously unable to do employing conventional methods.     

硫化物纳米级粒子化膜的形成与气相性质的影响

采用偏振光反光度、紫外及可见光谱、电子显微镜形貌观察、粒子大小测定及电子衍射等方法加以系统研究硫化锌纳米级粒子化膜的制备与气相性质的影响．     

High performance liquid chromatographic separation of dipeptide and tripeptide enantiomers using a chiral crown ether stationary phase

A chiral stationary phase (CSP) based on (-)-(18-crown-6)-2,3,11,12-tetracarboxylic acid was evaluated for the direct resolution of the enantiomers of dipeptides and tripeptides. The type and concentration of the acid and the methanol content were optimized with regard to retention time and resolution using Ala-Phe as model peptide. A mobile phase consisting of 10 mM sulfuric acid in 70% aqueous methanol was applied to the separation of a set of 16 structurally diverse dipeptides and tripeptides. Generally, the configuration of the amino acid at the N-terminus determined the enantiomer elution order. With a few exceptions the LL- and LD-enantiomers interacted stronger with the CSP compared to the corresponding DD- or DL-enantiomers. The experimental conditions also allowed the simultaneous separation of all four stereoisomers of Ala-Phe. Addition of ammonium sulfate generally reduced retention times and enantiomer resolution. Addition of triethylamine as modifier led to an overall increase of the retention times while the resolution did not show a general trend, increasing in the case of Ala-Ala but decreasing in the case of Ala-Phe.     

Novel alginate-poly(L-histidine) microcapsules as drug carriers: in vitro protein release and short term stability

Spherical, smooth-surfaced and mechanically stable alginate-poly(L-histidine) (PLHis) microcapsules with narrow particle size distributions were prepared by incubating calcium alginate beads in aqueous solutions of PLHis. The in vitro release characteristics, drug loading and encapsulation efficiency of the microcapsules were investigated using bovine erythrocytes hemoglobin (Hb) as a model drug. The results showed that the concentration of Ca(2+) ions had a considerable effect on the drug loading, encapsulation efficiency and in vitro release behavior of the microcapsules. When the concentration of CaCl(2) in the PLHis solution was increased from 0 to 3.0% (w/v), the drug loading and encapsulation efficiency decreased significantly from 38.0 to 4.3% and from 92.9 to 8.0%, respectively, while the total cumulative release of Hb from microcapsules in phosphate buffered saline solution (PBS, pH 6.8) decreased from 96.2 to 72.8% in 24 h. No significant protein release was observed during 70 h of incubation in hydrochloric acid solution (pH 1.2). However, under neutral conditions (PBS, pH 6.8), the Hb was completely and stably released within 24-70 h. An explosion test showed that the stability of alginate-PLHis microcapsules depended strongly on the concentration of PLHis and the calcium ions in solution. [Diagram: see text] Microscopy photo of Hb-loaded alginate-PLHis microcapsules.     

Formal Mathematical Analysis of the Existence of the Common Intersection Point in Relation to Determining the Parameters Describing Ion Adsorption at the Oxide/Electrolyte Interface: Comparison of the Triple and Four-Layer Models

For most oxide/electrolyte systems potentiometric titration curves measured for different ionic strengths have a Common Intersection Point (CIP) which corresponds to the Point of Zero Charge (PZC). However, there are systems where a CIP exists but the surface charge at this point does not equal zero (PZC CIP). In this paper theoretical analysis of the systems in which the PZC and CIP do not coincide is presented. It is based on the well-known 2-pK surface charging approach and Triple Layer Model (TLM) as well as the Four Layer Model (FLM) of the electric double layer. The appropriate mathematical criterion for CIP existence was applied with detailed derivations, both for TLM and FLM. Having determined in this manner the parameter values, one can draw proper conclusions about the features of oxide/electrolyte adsorption systems, in which PZC and CIP do not coincide. The values of adsorption parameters are found by fitting simultaneously the obtained theoretical expressions to both of the experimental titration isotherms, and to the individual isotherms of electrolyte cation adsorption measured using radiometric methods.     

Monte‐Carlo simulation of spatial distribution of characteristic x‐rays in multi‐film targets: source size of Al Kα x‐rays in W/Al film targets

A Monte‐Carlo simulation approach has been applied to describe the spatial distribution of characteristic x‐rays in W/Al film targets of different combinations of film thicknesses for the optimal design of a small‐sized x‐ray source having a high x‐ray intensity. The result has led to optimal combinations of W and Al film targets for 100 kV electrons, e.g. W(1 µm)/Al(20 µm), W(3 µm)/Al(15 µm) and W(5 µm)/Al(8 µm). These Al/W targets could be used as x‐ray sources for a medical instrument currently under development. Copyright © 2004 John Wiley & Sons, Ltd.     

Silica-supported Copper（Ⅱ） Catalyzed Coupling of Arylboronic Acids with Imidazoles

Immobilized copper（Ⅱ） in organic-inorganic hybrid materials catalyzed Ar-N coupling of arylboronic acids with imidazoles has been developed. Arylboronic acids reacted with imidazoles smoothly in the presence of a 3-（2-aminoethylamino）propyl functionalized silica gel immobilized copper（Ⅱ） catalyst （10 mol%） in methanol without any additives and bases. The reactions generated the corresponding cross-coupling products in good yields. Furthermore, silica-supported copper can be recovered and recycled by a simple filtration procedure and used for five consecutive trials without decreases in activity.     

Application of self-assembly for replacing chromate in corrosion protection of zinc

Due to the toxic and carcinogenic properties of hexavalent chromium ion, the corrosion protection with chromating technique needs replacement. Several environmentally friendly alternative metal pretreatments have already been proposed. One of these methods is the application of self-assembling molecules to form mono- or multilayers on the metal surfaces. These layers can prevent metal dissolution due to their dense and stable structure. The objective of our studies was to protect zinc surface against corrosion, with a thin phosphonate layer. Aqueous solutions of diphosphonic acid with different alkyl chain lengths were applied with different treatment times. The layer formation, stability, and corrosion protection of these films were monitored by electrochemical impedance spectroscopy and the effect of 1,5-diphosphono-pentane (DPP) on zinc was studied by polarization curves. The wetting properties were determined by static contact angle measurement. 1,5-Diphosphono-pentane forms a thin layer, with a pronounced protective ability in neutral aqueous solutions. The application of self-assembling molecules can be a promising method to replace the chromating technique on zinc surface.     

长链脂肪酸LB膜的X射线衍射研究

利用Langmuir-Blodgett技术制备了硬脂酸、花生酸及其混合酸的多层LB膜。用低角X射线衍射研究了它们的周期结构,硬脂酸和花生酸的LB膜在2θ=0.8°～23°的范围内分别出现13个和12个布拉格衍射峰,由此计算了它们的等同周期。用模型计算了它们衍射峰的强度,得到了与实验一致的衍射强度奇偶起伏的结果。在混合酸的LB膜中,可以观察到等同周期随混合比变化的规律。     

Thin layer distillation for matrix isolation in flow analysis

Analyte transfer from the matrix in a thin layer distillation (TLD) cell and its subsequent measurement were investigated in a flow injection configuration. We designed the cell such that the donor and acceptor streams flowed in parallel channels separated by a thin dividing wall. The matrix transfer process involved room-temperature distillation of the analyte into the headspace of the TLD cell and its subsequent condensation/uptake by a concurrently flowing acceptor stream. There are no membranes; hence there are no membrane-related problems. The TLD system design was optimized with respect to its dimensions and operational parameters. Throughput and sensitivity were compared with a conventional pervaporation flow injection (PFI) system for ammonia and five different amines. For the higher molecular mass amines, the TLD approach provided comparable or superior performance. The TLD technique should be an attractive approach for online analysis of volatile chemical species in ‘dirty’ samples, especially for volatile analytes of higher molecular mass.