乙醇和甲苯组成的最低共沸混合物热力学性质的研究

The molar heat capacity of the azeotropic mixture composed of ethanol and toluene was measured by a high precision adiabatic calorimeter from 80 to 320 K. The glass transition and phase transitions of the azeotropic mixture were determined based on the heat capacity measurements. A glass transition at 103.350 K was found. A solid-solid phase transition at 127.282 K, two solid-liquid phase transitions at 153.612 and 160.584 K were observed, which correspond to the transition of metastable crystal to stable crystal of ethanol and the melting of ethanol and toluene, respectively. The thermodynamic functions and the excess ones of the mixture relative to the standard temperature 298.15 K were derived based on the relationships of the thermodynamic functions and the function of the measured heat capacity with respect to temperature.     

Heat capacities and volumes of transfer of cholesteryl oleyl carbonate into various solvents

Heat capacities C _p and volumes V have been obtained at 25°C for the transfer of cholesteryl oleyl carbonate (ChOC) from a reference solvent, the highly-branched alkane 2,2,4,4,6,8,8-heptamethylnonane into various solvents. These include normal, branched, and cyclic alkanes as well as the pure cholesteric ChOC. V and most C _p are associated with the change of environmental free volume during the transfer process and are predicted by the Prigogine-Flory theory. However, for n-alkane solvents with more than twelve carbons, C _p is large, positive, and unattributable to free volume changes. It is consistent with a restriction of alkane segmental motion by the ChOC. The same mechanism has been proposed to explain an antiplasticization effect of ChOC on transitions in polymers.     

Influence of Cycle Temperatures on the Thermochemical Heat Storage Densities in the Systems Water/Microporous and Water/Mesoporous Adsorbents

The adsorption equilibrium of water on microporous adsorbents (zeolites of NaA-, NaY- and NaX-type as well as their ion exchanged forms) and on mesoporous adsorbents (different silica gels and composite material i.e. silica gel + salt hydrate) has been studied experimentally and theoretically. Using the Dubinin theory of pore filling the characteristic curves of the adsorption systems and other relevant dependences such as isotherms, isobars, isosteres and the curve of the differential heat of adsorption were calculated. For all systems investigated the adsorption were calculated. A_ads and the desorption potential A_des of the closed heat storage system were estimated. These values define the working range of the adsorption/desorption cycle and allow to calculate the specific heat storage density Δ h_sp. On the basis of Δ h_sp the different adsorbents were compared in order to select the optimal porous storage material for a given application. The presented experimental and theoretical investigations show that the adsorption systems water-zeolite and water-composites are promising working pairs for thermochemical heat storage processes for hot tap water supply and space heating of single family dwellings. The advantage of the water-composite system is the low desorption temperature (solar energy) the main shortcoming the low temperature lift. The advantage of the water zeolite system is the high temperature lift, the shortcoming are the relative high desorption temperatures.     

Thermodynamic properties of alkali halides. V. Temperature and pressure dependence of excess free energies in water

A simple equation has been derived relating the temperature dependence of activity functions with excess enthalpies and excess heat capacities. Using experimentally determined parameters at 298.15°K, it is possible to predict osmotic coefficients and mean activity coefficients of alkali halides in water up to 1 m from 273°K to about 350°K. In general, the predicted functions agree with the measured values within the uncertainty of the activity data. An equation is also given for the pressure dependence of the excess free energies, but it was not possible to check the limitation of this equation due to lack of activity data at various pressures.To whom correspondence should be addressed.     

Topical Problems in Elemental Analysis of Advanced Ceramic Materials

Selected prominent problems in the analysis of advanced ceramic materials are surveyed. The importance of reliability of results is discussed in the field of elemental trace- and microanalysis in view of its interaction with economy, power of detection, local resolution and speciation selectivity. Particular problems in the analysis of major constituents, trace components and microlocal distributions are based on the striking propertics of ceramics; they are exemplified. Analytical assistance must start from the beginning of the production processing, in the preparation of the powdered base materials. Determination of the stoichiometry requires high accuracy and differentiation of chemical species in bulk and surface analysis of ceramic base powders. Element trace determination by direct instrumental methods requires standard reference materials for calibration; these are currently inavailable in a sufficient variety. For optimum reliability and power of detection, element traces must be prepared in isolated form in a small excitation volume for analysis. A review on the state-of-the-art of wet-chemical combined procedures is presented. Decomposition position procedures are emphasized, due to their risk of contributing severe systematic error. Combustion in elementary fluorine is presented for decomposition of refractory materials. The performance of some direct procedures is discussed. Very efficient methods are available for element trace determinations in ceramic materials, offering high detection power. Several approaches for high-resolution local microanalysis in non-conductive ceramic materials are identified as the most promising development in the analysis of sintered compact ceramic products and devices.     

脲衍生物对环氧树脂/双氰双胺固化体系潜伏性促进作用研究

本文用DSC、TBA、旋转粘度计等手段对一系列不同结构及不同取代基取代的脲衍生物对环氧树脂/双氰双胺固化体系的潜伏性促进作用作了考察。结果表明,其促进效果随脲的α位取代烷基碳原子数增加而减弱,而其β、γ位上的取代基团变换时对促进作用无明显影响。由此得出4,4-二(N,N-二甲基)脲二苯甲烷(简称M-二甲)和2,4-二(N,N-二甲基)脲甲苯(简称T-二甲)二种脲衍生物在本丈所考察的28种化合物中具有最显著的促进效果,其中T-二甲的促进活性略高于M-二甲,它们均可使上述固化体系的固化温度降至130℃左右,含有此促进剂的固化体系即使在30℃下贮存,其粘度保持基本不变的时间仍可达三个月以上。     

Heat capacities of aqueous solutions of amino acid and dipeptide derivatives of fullerene

The concentration dependences of heat capacities of aqueous solutions of several amino acid and peptide derivatives of fullerene were measured by scanning differential calorimetry at 298 K. The heat capacities for the arginine, alanylalanine, and glycylvaline derivatives dissolved in water depend slightly on concentration. The concentration dependences of the heat capacities of aqueous solutions of the serine and alanine derivatives display extrema. The calculated contributions of hydration to the heat capacities of the dissolved fullerene derivatives have both positive and negative signs. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2202–2204, November, 1998.     

Ionization of five aqueous fluorobenzoic acids: Conductance and thermodynamics

The three monofluorobenzoic acids together with 2,4-difluoro and 2,6-difluorobenzoic acids in aqueous solution are the subject of precision conductance measurements. The experimental data are analyzed to give ionization constants and limiting conductances at temperatures from 0 to 100°C. Walden products for the acid anions are derived from the limiting conductances while the ionization consatants are fitted by statistical methods to the function pK _a (m)=A+B/T+ C logT+DT. Only the 2,6- acid requires the fourth term of the function to fit the data to a precision of better than 0.03%. Mathematical analysis of the pK function gives the standard changes in enthalpy, entropy, and heat capacity. All the acids studied are more acidic than the parent, benzoic acid, as well as more acidic than the isoelectronic methylbenzoic acids. In general the increased acidity is tied to decreases in enthalpy while entropy changes on ionization differn little from those found for the parent acid.     

Quantitative Correlations for the Estimation of Thermodynamic and Molecular Properties of Pyridines and 2,2′-Bipyridyines

Standard heats of formation, entropies, ionization potentials, and molecular dipole moments of a series of pyridines have been calculated by MNDO, AM1 and PM3 methods. Linear relationship have been established which permit a priori estimation of thermodynamic and molecular characteristics of pyridines. Correlation have been found between the values of pK_a for 2,2′-bipyridines for aqueous solutions and their gas phase proton affinities.__________Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 3, 391–402, March, 2005.     

Binary mixtures of cyclohexanone, 2-butanone, 1,4-dioxane and 1,2-dimethoxyethane

Densities and sound velocities of binary mixtures of cyclohexanone, 2-butanone, 1,4-dioxane and 1,2-dimethoxyethane were measured at 298.15 K and also the densities at 303.15 K. Excess volumes were determined from densities. Isentropic compressibilities were determined from densities and sound velocities, and excess thermal expansion factors were determined from excess volumes of two temperatures. Excess isothermal compressibilities and excess isochoric heat capacities were then estimated using excess isobaric heat capacities previously reported. Excess volumes and excess isentropic and isothermal compressibilities were negative except for cyclohexanone+1,4-dioxane system. This revised version was published online in August 2006 with corrections to the Cover Date.