空间展布体系中由化学反应-扩散-热传导耦合导致的温度场对称破缺

分析了由于化学反应-扩散-热传导耦合而导致的非等温非均匀体系中温度场对称破缺.研究结果表明,在一定的边界条件下,甚至是单组分化学反应-扩散-热传导体系,温度场的这种自组织进程也不可避免.作为温度场结构的一个范例,进一步从解析解及计算机模拟两个方面研究了小展布非等温的Lindeman模型;结果表明,温度场出现时空自组织的阈值不仅与本征参数有关,而且与体系的边界条件及外控约束相关,揭示出了诱发或避免这种温度场时空自组织之途径.     

Adsorption Heat Pump Using an Innovative Coupling Refrigeration Cycle

An adsorption heat pump system using a new binary coupling adsorptive cycle is developed and tested. Experimental results show that the COP of the binary coupling cycle is higher than that of a pure zeolite-water system. The system operating pressure is found to be moderate (close to the ambient pressure) when a proper concentration of ammonia is used in the system. The moderate operating pressure of the new coupling cycle results in low leakage to the system, achieving long life and the light design of the system vessels. The use of the new binary adsorption cycle greatly improves the feasibility and reliability of the adsorption heat pumps, providing essential benefits for the industrialisation of adsorption heat pumps.     

Quenching of Flame Propagation with Heat Loss

The steady propagation of a planar laminar premixed flame, with a one-step exothermic reaction and linear heat loss, is studied. The corresponding travelling wave equations are solved numerically. The dependence of the flame velocity on the heat loss parameter is determined and compared with known results obtained by asymptotic expansion and other approximations. Due to the introduction of an ignition temperature the problem can be reduced to a bounded interval (of length L) and the graph of flame speed versus heat loss parameter can be parametrised by L. The numerical method is tested in the case of a step function nonlinearity when the exact solution of the differential equations can also be calculated.     

XPS characterization of wood chemical composition after heat‐treatment

XPS was used to characterize the chemical changes occurring after drying or applying a heat‐treatment to beech wood samples. Our results indicate that the surface of this air‐exposed material could be strongly affected either by the ambient atmosphere during storage or by the complex atmosphere in the oven during drying or heat‐treatment. However, the O/C ratio measured after removal of a thin slice of a few millimetres of an untreated sample is in reasonable agreement with that calculated from the well‐established chemical composition of beech. Through this methodology (equivalent to scraping for hard materials) it is expected to get a realistic characterization of the wood. The reliability and repeatability of the XPS measurements have been checked and the method applied to the study of the chemical changes of the beech samples subjected to heat‐treatment. Heating at 240 °C induces a significant decrease of the O/C ratio from 0.55 before to 0.44 after the treatment. Heat‐treatment induces also a decrease of the C₂ carbon contribution (carbon atom bound to a single non‐carbonyl oxygen) associated with an increase of the C₁ carbon contribution (carbon atoms bound only to carbon or hydrogen atoms), in agreement with chemical modifications reported previously in the literature. Thanks to the small analysed area of the equipment used in this study, different spots were analysed to demonstrate the presence or absence of a gradient of chemical composition due to thermal degradation or migration of extractives from within the wood structure to its surface. At the scale of our observations, the different wood samples investigated (dried or heat treated) appear to be homogeneous. Copyright © 2006 John Wiley & Sons, Ltd.     

Differential 3ω calorimeter

We have developed a new dynamic calorimeter using the differential 3ω detection method. The differential 3ω calorimeter is capable of measuring dynamic heat capacity of liquid samples. The new calorimeter consists of a Wheatstone bridge made of two identical heater/sensors, and is based on the sensitive null detection method. The balancing is done automatically at all frequencies and is independent of temperature; once a sample is placed on one heater/sensor, a third harmonic signal is produced due to the difference in the two arms of the bridge. The differential 3ω calorimeter provides enhancements over traditional dynamic methods in dynamic range (up to 30 kHz), resolution, and ease of operation.     

Structural and physical properties of the 6H BaRuO3 polymorph synthesized under high pressure

The single-phase 6H BaRuO₃ with the hexagonal BaTiO₃ structure was synthesized at 5 GPa and 1000 °C. Rietveld refinement of the powder X-ray data for the 6H phase resulted in the lattice parameters to be a=5.7127(1) Å and c=14.0499(2) Å; the average Ru-O distance and direct Ru-Ru distance in the Ru₂O₉ dioctahedron being 1.992(6) and 2.5658(14) Å, respectively. The electrical resistivity of the 6H BaRuO₃ follows a relationship of ρ versus T^3/2 below 60.0 K, a signature deviation from the Fermi-liquid behavior. Both magnetic susceptibility and specific heat data indicate that the 6H BaRuO₃ is an exchange-enhanced Pauli paramagnet due to the electron correlation effect with large Wilson ratio R_W and Stoner enhancement factor. The comprehensive evolution of transport and magnetic properties from 9R across 4H to 6H BaRuO₃ was discussed.     

低温热管传热性能的实验研究

热管是一种高效的传热元件,低温热管可望在超导磁体冷却、空间探索方面获得广泛应用.本文对热虹吸管的传热特性进行了实验研究.研究结果表明,在同样加热功率的条件下,与相同形状和尺寸的紫铜导热棒相比,在加热功率较高的条件下,低温热管的传热性能远远优于紫铜棒的传热性能,完全能够满足超导磁体的冷却要求.     

超临界水在倾斜光管中的传热不均匀特性研究

对超(超)临界压力下水在倾斜光管内的传热特性进行了比较系统的实验研究.实验段管径为φ32×3mm,倾角α=20°;试验压力P=23~34MPa,内壁热负荷q=300~500kW/m2,管内质量流速G=300~2000kg/m2s.得到了不同工况下倾斜光管内壁温和管内换热系数的周向分布及其变化规律,考察了压力、质量流速及热负荷对倾斜光管内壁温度的周向分布的影响,重点分析了管内上下母线处内壁温度差随工质焓值变化的特性及机理,讨论了大比热区水的物性变化对倾斜光管内传热不均匀性的影响,并与亚临界压力下的对应实验结果进行了比较.     

燃气机热泵全年性能优化研究

本文建立了燃气机热泵(GEHP)的全年性能优化模型,定义了燃气机热泵的全年性能系数,比较了采用不同优化目标函数得到的优化结果的差别,研究了冷负荷比例变化对全年性能优化的影响,分析了燃气机热泵在不同地区应用时全年性能优化目标的确定.