Light-induced interaction between graphene and magnetic film in a cavity

An interaction mechanism between graphene and magnetic film in cavity is presented in this work. The pseudospin in graphene can indirectly interact with the spins in magnetic film by the media of a circularly polarized photons under the conditions of high temperature and intense laser field. The interaction energy as well as the average values of pseudospin and spin components are calculated according to a generating functional approach. This interaction mechanism provides a scheme of detecting the pseudospin polarization effect.     

Facile sonochemical synthesis of rutile-type titanium dioxide microspheres decorated graphene oxide composite for efficient electrochemical sensor

In this reports the facile and green synthesis of rutile-type titanium dioxide nanoparticles decorated graphene oxide nanocomposite via the ultrasonication process (frequency: 50 kHz, Power: 100 W/cm² and Ultrasonic type: Ti-horn). Because, the sonochemical synthesis method is simple, non-explosive and harmless method than other conventional technique. Furthermore, the synthesized material was characterized by various analytical techniques including FESEM, EDX, XRD, EIS and electrochemical methods. Then, the synthesized TiO₂ MPs@GOS composite was applied for the electrocatalytic detection of theophylline (TPL) using CV and amperometric (current-time) techniques. Captivatingly, the modified sensor has excellent electrocatalytic performance with the wider linear range from 0.02 to 209.6 µM towards the determination of theophylline and the LOD and sensitivity of the modified sensor was calculated as 13.26 nM and 1.183 μA·µM⁻¹·cm⁻², respectively. In addition, a selectivity, reproducibility and stability of the TiO₂ MPs@GOS modified GCE were analyzed towards the determination of theophylline molecule. Finally, the real time application of TiO₂ MPs@GOS modified theophylline sensor was established in serum and drug samples.     

基于石墨烯/石墨烯卷轴复合薄膜高灵敏度柔性压力传感器

一维导电材料例如纳米线,大量应用于柔性压力传感器中. 但是一维材料和基底之间接触时相互作用力较弱,使得传感器灵敏度、响应时间、和循环寿命等性能指标有待进一步提高. 针对这些问题,设计了石墨烯/石墨烯卷轴多分子层复合薄膜作为传感器导电层. 石墨烯卷轴具有一维结构,而石墨烯的二维结构可以牢固地固定卷轴,以确保高导电性复合薄膜与基底之间的粘附性,同时整体结构的导电通道得到了增加. 由于一维和二维结构的协同效应,实现了应变灵敏度系数3.5 kPa^-1、 响应时间小于50 ms、能够稳定工作1000次以上的压阻传感器.     

Graphene to graphite; a layer by layer experimental measurements and density function theory calculations of electric conductivity

ABSTRACT

We measured the electric conductivity of large (25?×?50?mm) graphene films as a function of number of layers in the range of 1–20 layers. We also calculated the energy gap for such samples using density function theory. Our results showed a conductivity slightly above that of ITO for monolayer graphene and an exponential decrease as the number of graphene layers increased. Both experimental and simulation results showed a convergence of graphene into graphite at as little as 18–20 layers.     

含硫氨基酸与本征及缺陷石墨烯表面的相互作用

半胱氨酸及蛋氨酸是人体的两种含硫氨基酸,在生物活性中发挥着巨大的作用.本研究采用密度泛函理论方法对以上两种氨基酸在本征及缺陷石墨烯表面的吸附机理进行了详细研究.主要考虑了两种吸附体系:半胱氨酸及蛋氨酸平躺在两种石墨烯表面;两种氨基酸垂直地放置于两种石墨烯表面,且含硫的基团靠近表面.研究结果表明,半胱氨酸及蛋氨酸初始构型对它们之间的相互作用有一定的影响.两种氨基酸平躺时有较大的吸附能.此外,吸附能的结果显示两种氨基酸可以更好的与缺陷石墨烯表面紧密结合.同时,蛋氨酸与本征及缺陷石墨烯相互作用均大于半胱氨酸与本征及缺陷石墨烯相互作用.模拟结果有望为含硫氨基酸的石墨烯传感器提供有用的指导.     

基于石墨烯超材料表面等离子体激元共振的增强太赫兹调制

基于表面等离子体共振原理,采用石墨烯超材料设计了开口环结构,用于调制太赫兹波.增加石墨烯的费米能级,改变开口环的开口距离,叠加多层石墨烯以增强石墨烯超材料的共振强度,进而增强太赫兹波调制,调制频率范围包括低频段和高频段.由于石墨烯费米能级的可调谐性,单层结构在高低两个频段的调制深度分别为81%和68%,多层结构在高低两个频段的调制深度分别增加到93%和95%,为动态调制提供了可能.该设计为调制器、吸收体等太赫兹器件的设计提供了指导和借鉴.     

含石墨烯二维金属结构中的自发辐射研究

研究原子在金属结构中的自发辐射时引入单层石墨烯薄膜,利用石墨烯特殊的光电特性来调控原子的自发辐射率.推导了局态密度与自发辐射率的格林函数表示形式,并结合频域有限差分方法进行了数值模拟.分析结果表明:随着化学势的增大,自发辐射波峰出现蓝移现象,且自发辐射率波峰得到增强,理论上实现了原子自发辐射率峰值位置与幅度的调制.研究结果可以为新型纳米器件及光电子设备的制造和优化提供参考.     

基于铜离子沉积石墨烯涂层锥形光子晶体光纤的硫化氢传感器

提出一种基于铜沉积石墨烯涂层光子晶体光纤马赫-曾德干涉的硫化氢气敏传感器.将45mm光子晶体光纤两端与单模光纤进行拉锥熔接,使得光子晶体光纤的空气孔熔接时形成塌陷层,更好地激发包层模式,形成基于马赫-曾德结构的干涉仪.采用单层石墨烯粉体,加入异丙醇分散液,反复浸涂至光子晶体光纤包层表面形成石墨烯涂层,并沉积铜纳米颗粒,使传感器对硫化氢气体具有高的响应度.实验结果表明,在硫化氢气体浓度为0~60ppm范围内,随着被测气体浓度不断增大,其输出光谱呈现明显蓝移,传感器灵敏度为0.042 03nm/ppm,且线性度良好.该传感器成本低、灵敏度高、结构简单,适用于低浓度硫化氢气体的在线监测.     

Propagation of extremely short pulses in a graphene–boron nitride bilayer

In this study we investigate the propagation of extremely short optical pulses in a thin film formed by a graphene grown on a boron nitride substrate. Conduction electrons of the system are described on the basis of the long-wavelength effective Hamiltonian in the case of low temperatures; the electromagnetic field being taken into account within the framework of the classical Maxwell equations. The time evolution of the pulse?s shape for different speeds and maximum amplitudes of an extremely short pulse is analyzed.     

0.73～1.7μm超宽带微纳光纤波导全光调制器

提出了单层石墨烯包裹双锥形微纳光纤复合波导结构,构建了730~1 700nm超宽带微纳光纤波导全光调制器。通过火焰拉锥法将一根标准的通信单模光纤拉成具有双锥形的微纳光纤,在保证通光率的前提下可以极大的提升微纳光纤处的倏逝波与物质的相互作用。利用石墨烯的"超级特征",即单原子层厚度、线性色散的能带结构、超强的载流子带间跃迁及极短的弛豫时间和超宽带光与物质相互作用等,将单层石墨烯作为可饱和吸收体,包裹在双锥形微纳光纤波导的锥体上,以增强该复合波导表面倏逝波与石墨烯的相互作用。静态和动态全光调制实验中采用传统808nm低功率LD作为泵浦光,对谱宽为480~1 700nm的超连续谱探测光实现了光光调制,其泵浦光功率低于50mW,调制深度大于5.7dB,调制速率达到~4kHz。该微纳光纤波导全光调制器,在保证调制深度的情况下,用更低的泵浦功率实现了超宽带的全光调制,以简单、有效、廉价的方式兼容了当前高速光纤通信网络,打开了一扇未来对微纳超快光信号处理的大门。