Surface modification of highly dispersed rubber fillers and pigments by titanate proadhesive and hydrophobic compounds

A method of modifying silicate and carbonate fillers with titanate coupling agents and proadhesive agents was worked out. The modification aimed at hydrophobization of filler surface by introduction to the surface of functional groups with chemical affinity to polymers. Optimum amounts of modifying substances and appropriate conditions for performing the modification process were established. The obtained fillers showed a high degree of hydrophobicity.The modified fillers were applied in rubber mixtures based on butadienestyrene or natural rubber, in polyurethanes, in PVC, and as pigments in oil dyes of high corossive resistance.     

CO2选择性氧化甲烷制C2烃催化剂La2O3/ZnO的氧化还原和CO2吸附性能

Ｌａ２Ｏ３／ＺｎＯ催化剂体系在以二氧化碳作为氧化剂的甲烷氧化偶联反应中具有很高的Ｃ２烃选择性和稳定性．采用ＣＯ２－ＴＰＤ－ＭＳ和ＴＰＲ技术考察了Ｌａ２Ｏ３／ＺｎＯ对ＣＯ２的吸附性质及其氧化还原行为．结果表明：（１）Ｌａ２Ｏ３／ＺｎＯ催化剂体系存在着强、弱两种碱中心，其中弱碱中心数量随样品中Ｌａ２Ｏ３含量增加而减少，强碱中心强度随样品中Ｌａ２Ｏ３含量增加而增强．（２）由于组分相互作用，高温下，Ｌａ２Ｏ３／ＺｎＯ易产生晶格氧空位，使之对ＣＯ２的吸附增强，吸附后的ＣＯ２与晶格氧作用形成立方晶型Ｌａ２Ｏ２ＣＯ３．（３）Ｌａ２Ｏ３／ＺｎＯ表面的Ｌａ３＋和Ｚｎ２＋可以部分被还原，由于组分间的相互作用，使得二者的还原都较单一组分存在时更难．（４）Ｈ２－ＣＯ２－Ｈ２氧化还原循环实验表明，Ｌａ２Ｏ３／ＺｎＯ表面被部分还原后，ＣＯ２可以将部分被还原的表面再氧化．在此基础上对Ｌａ２Ｏ３／ＺｎＯ催化剂上甲烷与ＣＯ２转化为Ｃ２烃的机制也进行了讨论．     

Synthesis and Structure of the New Compound La2O(CN2)2 Possessing an Interchanged Anion Proportion Compared to the Parent La2O2(CN2). Synthese und Kristallstruktur der neuen Verbindung La2O(CN2)2 mit einem vertauschten Anionenverhältnis gegenüber der Bezugsverbindung La2O2(CN2)

La₂O(CN₂)₂ was synthesized from a 1:1:2 molar reaction mixture of LaCl₃, LaOCl, and Li₂(CN₂) at 650 °C. Well developed single crystals were grown from a LiCl‐KCl flux. The crystal structure was refined as monoclinic (space group C2/c, Z = 2, a = 13.530(2) Å, b = 6.250(1) Å, c = 6.1017(9) Å, β = 104.81(2)°) from single crystal X‐ray diffraction data. The La³⁺ and (CN₂)^2— ions in the crystal structure of La₂O(CN₂)₂ can be compared to Fe³⁺ and S₂^2— ions in the cubic pyrite structure, being arranged like in a distorted NaCl type structure with their centers of gravity. In addition, the O^2— ions in La₂O(CN₂)₂ are occupying 1/4 of the tetrahedral voids formed by the arrangement of metal ions.     

钛酸钾晶须界面性质研究

通过乳液聚合的方法对钛酸钾晶须进行表面改性,获得了表面包裹聚甲基丙烯酸甲酯的钛酸钾晶须. FT-IR、SEM、EDS的表征表明,钛酸钾晶须的表面包裹了聚甲基丙烯酸甲酯膜,形成了以钛酸钾晶须为核,聚甲基丙烯酸甲酯为壳的复合粒子.研究表明,改性后的晶须表面能降低,在有机溶液中的界面张力大大降低,与聚甲基丙烯酸甲酯的界面性质相似,说明改性后的晶须基本被聚甲基丙烯酸甲酯完全包裹,因此晶须由亲水性变为疏水性,在有机溶液中的分散性显著提高.     

Apparent Molar Volume, Heat Capacity, and Conductance of Lithium Bis(trifluoromethylsulfone)imide in Glymes and Other Aprotic Solvents

Lithium bis(trifluoromethylsulfone)imide (LiTFSI) is a promising electrolyte for high-energy lithium batteries due to its high solubility in most solvents and electrochemical stability. To characterize this electrolyte in solution, its conductance and apparent molar volume and heat capacity were measured over a wide range of concentration in glymes, tetraethylsulfamide (TESA), acetonitrile, -butyrolactone, and propylene carbonate at 25°C and were compared with those of LiClO₄ in the same solvents. The glymes or n(ethylene glycol) dimethyl ethers (nEGDME), which have the chemical structure CH₃–O–(CH₂–CH₂–O) _n –CH₃ for n = 1 to 4, are particularly interesting since they are electrochemically stable, have a good redox window, and are analogs of the polyethylene oxides used in polymer-electrolyte batteries. TESA is a good plasticizer for polymer-electrolyte batteries. Whenever required, the following properties of the pure solvents were measured: compressibilities, expansibilities, temperature and pressure dependences of the dielectric constant, acceptor number, and donor number. These data were used in particular to calculate the limiting Debye-Hückel parameters for volumes and heat capacities. The infinite dilution properties of LiTFSI are quite similar to those of other lithium salts. At low concentrations, LiTFSI is strongly associated in the glymes and moderately associated in TESA. At intermediate concentrations, the thermodynamic data suggests that a stable solvate of LiTFSI in EGDME exists in the solution state. At high concentrations, the thermodynamic properties of the two lithium salts approach those of the molten salts. These salts have a reasonably high specific conductivity in most of the solvents. This suggests that the conductance of ions at high concentration in solvents of low dielectric constant is due to a charge transfer process rather than to the migration of free ions.     

Polygermoxanes suitable for biochemical purposes: II Linear trigermoxanes (high-viscosity oils)

Linear trigermoxanes, R¹ RGeOGe(R³)₂OGeRR¹, a new series of organogermanium compounds, were synthesized by reaction of a lithium organogermanolate with a suitable organogermanium dihalide. With alkyl or phenyl substituents, these trigermoxanes are structurally unstable viscous oils, due to redistribution reactions. When R³ substituents are bulky groups, such as mesityl, trigermoxanes are thermally and structurally stable oils; depending on the R¹ and R² substituents their viscosities lie in the range 240 to more than 1500 cPo (mPa s) at 20°C. When both terminal germanium atoms are substituted with two mesityl groups, trigermoxanes are stable glassy solids.     

Anharmonicity and fragility in lithium borate glasses

Since the physical properties of lithium borate glasses xLi₂O-(1-x)B₂O₃ (0<x< 0.28) vary over a wide range with the composition, this binary system is particularly suitable for studying the relationship between vibrational anharmonicity and fragility. The density, the linear expansion coefficient, the longitudinal and transverse ultrasonic velocities and their respective temperature coefficients of the velocities are measured, from which the vibrational anharmonicity in lithium borate glasses is evaluated with the help of the Grüneisen parameter at the Debye cut-off frequency and the Anderson-Grüneisen parameter: these two parameters plotted vs. composition have the same characteristics with minima at x≈0.08. The fragility is evaluated from the temperature width of the glass transition; the fragility also shows a minimum at x≈0.08. The presence of minima at x≈0.08 is ascribable to the fact that the crosslinking density between six-membered rings in the glass reaches a maximum at this composition. We show that the anharmonic parameters strongly correlate with the fragility metrics. This revised version was published online in August 2006 with corrections to the Cover Date.     

添加剂对SiO电性能的影响及其机理分析

SiO_x/CoO and SiO/Li₂CO₃ composite materials were prepared by mechanical ball-milling. The structures of the obtained materials were characterized by X-ray diffraction (XRD). And scanning electron microscopes (SEM) of three samples after 20 cycles were also given. In addition， the electrochemical performances of three materials with galvanostatic charge-discharge cycling were investigated. The results show that the composite samples have larger initial reversible capacities and better cycle performance than pure SiO. Also，a schematic diagram showing the buffer effects of Li₂CO₃ addition and the mechanism of improving electrochemical performance by adding Li₂CO₃ are suggested.     

Untersuchungen im System LaI2/H2: Phasenverhältnisse und Fehlordnung

Investigation of the LaI₂/H₂ System: Phase Relations and Stacking Disorder Heating of LaI₂ under 1 bar hydrogen pressure to 650 °C leads to light gray LaI₂H_0.95(3), accompanied by a structural change from tetragonal to hexagonal. Sharp reflections in the XRD pattern can be indexed in P6₃/mmc with a = 4.2158(7)Å and c = 15.508(3)Å, however, diffuse reflections indicate the presence of stacking faults in the structure, which correspond to a polytypic intergrowth of MoS₂ and NbS₂ type structural fragments. Increasing the reaction temperature to 730 °C results in a better defined diffraction pattern with the peak positions close to those of the 2H‐NbS₂ structure type. An X‐ray powder study of the samples LaI₂H_n proved the miscibility gap between LaI₂ and LaI₂H_n (0 ≤ n ≤ 0.5) in agreement with previous results. With decreasing H‐content of the homogeneous phase the lattice parameters change in opposite direction, a increasing to 4.236(1)Å and c decreasing to 15.39(2)Å for the lower limit.     

Contributions on the Properties of Titanates with Ilmenite Structure. IV. The effect of an order-disorder transition on the high temperature electrical conductivity of NiTiO3

NiTiO₃ shows an order-disorder transition from an ordered ilmenite structure to a corundum structure at high temperatures. The transition is followed by a strong increase of the specific electrical conductivity. The conductivity was investigated as a function of temperature and oxygen activity. An order parameter according to common phase transition theories can be used to describe the behaviour of the conductivity in the transition region and vice versa. A model for the defect structure of NiTiO₃ is presented.