十二烷基磺酸根插层水滑石负载纳米钯催化的 Suzuki 偶联反应

 首次制备了十二烷基硫酸根 (DS–) 插层水滑石负载的纳米钯无膦配体型的 Suzuki 偶联反应催化剂. DS–进入到水滑石层间, 使层间距从微孔增至 2.9 nm, 从而有利于中等尺度的有机分子在催化剂表面的扩散. 进一步以 PdCl42–交换该水滑石得到 DS–和 PdCl42– 双插层的水滑石. 还原后可得到层间插有金属钯纳米团簇的水滑石. 由于 DS–插层后在水滑石层板间形成的空间有限, 限制了 Pd0 团簇的进一步生长. 作为一种亲油性的非均相催化剂, 该类催化剂可有效促进卤代芳烃与苯硼酸的 Suzuki 偶联反应. 催化剂循环使用 5 次后活性基本得以保持.     

层状复合金属氢氧化物-聚丙烯酸钠水分散体系的双絮凝现象及机理探讨

研究了聚丙烯酸钠(PAAS)对镁铝型层状复合金属氢氧化物(MgAl-LDH)的胶体水分散体系稳定性的影响. 利用总有机碳(TOC)分析技术测定了PAAS在LDH颗粒上的吸附量, 并利用ζ电位表征了LDH颗粒的电性质. 实验结果表明, 在质量分数为1%的LDH水分散体系中加入0.006~2.400 mmol/L PAAS, 随着PAAS浓度的增加, LDH-PAAS混合体系出现了絮凝-分散-再絮凝变化. 同时, 随着PAAS浓度的增加, PAAS在LDH颗粒上的吸附导致颗粒ζ电位由正减至0, 并进一步负向增加, 颗粒间静电斥力先减小后增加, 因此体系先絮凝再分散. 随着LDH颗粒负电性的进一步增强, 未吸附的PAAS引发颗粒间产生的空缺引力成为体系再次絮凝的主要原因. 对吸附PAAS的LDH颗粒的红外光谱分析表明, PAAS主要通过-COO-与LDH的相互作用而吸附在颗粒上.     

XNBR/LDH nanocomposites: Effect of vulcanization and organic modifier on nanofiller dispersion and strain‐induced crystallization

In elastomer/organo clay nanocomposites, the morphological characteristics, and hence the mechanical properties, of the vulcanizates are strongly influenced by the organic modifier and the vulcanization process. When the elastomer itself undergoes strain‐induced crystallization, both the organic modifier and the dispersed filler particles could significantly influence the crystallization process. These phenomena are very common in case of natural rubber‐based vulcanizates. In this study, the similar effects have been demonstrated with carboxylated nitrile rubber (XNBR) and organically modified layered double hydroxide (O‐LDH)‐based nanocomposites. The effect of size of the organic modifier was obviously visible on the interlayer distance of O‐LDH and also on the morphological reorganization of the dispersed O‐LDH particles during vulcanization process. The strain‐induced crystallization of the XNBR was found to be strongly dependent on the morphological change that occurs during vulcanization process. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

层离型PMMA/镁铁双氢氧化物纳米复合材料的热降解研究

通过原位聚合方法制备了以非水溶性聚合物(聚甲基丙烯酸甲酯,PMMA)为基体,与MgFe双氢氧化物(LDH)具有良好相容性的层离型纳米复合材料.采用小角、广角X射线衍射(XRD)及透射电镜(TEM)对纳米复合材料的微观结构进行了分析,通过热重分析(TG)和玻璃化转变研究了纳米复合材料在空气和氮气氛围下的热降解过程.实验结果表明,MgFe-LDH的引入显著提高了聚合物基体的热降解温度和玻璃化转变温度,纳米复合材料的热稳定性显著提高.其中含量1.6 wt%的层离型纳米复合材料在失重50%时的热降解温度比纯样提高约69℃.并且整个纳米复合体系的相容性良好,含量8.0 wt%的样品,其可见光透过率仍可达90%以上.     

Preparation and physical properties of flame retardant acrylic resin containing nano-sized aluminum hydroxide

Poly(methylmethacrylate) (PMMA) shows high strength and transparency but is a flammable material. In this study, the surface of aluminum hydroxide was modified with methacrylate containing phosphoric acid moieties before dispersion in MMA, and organic-inorganic nano-hybrid materials were obtained by bulk polymerization in the presence of the surface-modified aluminum hydroxide. The resulting hybrid materials retained the high transparency of PMMA, with transparency values similar to that of pure PMMA. Moreover, the flame resistance of the hybrid materials was improved in comparison with that of pure PMMA, with depression of the horizontal burning rate becoming a maximum at an inorganic content of 3 wt%. These results suggest that the use of aluminum hydroxide surface-modified with phosphoric acid groups is an efficient method for obtaining good performance fire-resistant polymer materials.     

Morphology-controlled nonaqueous synthesis of anisotropic lanthanum hydroxide nanoparticles

The preparation of lanthanum hydroxide and manganese oxide nanoparticles is presented, based on a nonaqueous sol-gel process involving the reaction of La(OiPr)₃ and KMnO₄ with organic solvents such as benzyl alcohol, 2-butanone and a 1:1 vol. mixture thereof. The lanthanum manganese oxide system is highly complex and surprising results with respect to product composition and morphology were obtained. In dependence of the reaction parameters, the La(OH)₃ nanoparticles undergo a shape transformation from short nanorods with an average aspect ratio of 2.1 to micron-sized nanofibers (average aspect ratio is more than 59.5). Although not directly involved, KMnO₄ plays a crucial role in determining the particle morphology of La(OH)₃. The reason lies in the fact that KMnO₄ is able to oxidize the benzyl alcohol to benzoic acid, which presumably induces the anisotropic particle growth in [0 0 1] direction upon preferential coordination to the ±(1 0 0), ±(0 1 0) and ±(−110) crystal facets. By adjusting the molar La(OiPr)₃-to-KMnO₄ ratio as well as by using the appropriate solvent mixture it is possible to tailor the morphology, phase purity and microstructure of the La(OH)₃ nanoparticles. Postsynthetic thermal treatment of the sample containing La(OH)₃ nanofibers and β-MnOOH nanoparticles at the temperature of 800 °C for 8 h yielded polyhedral LaMnO₃ and worm-like La₂O₃ nanoparticles as final products.     

Binary Zinc Azides

Pure, solvent‐free Zn(N₃)₂ was prepared by reaction of diethyl zinc and hydrazoic acid in aprotic solvents. The single‐crystal structure determination, along with the comprehensive characterization of α‐Zn(N₃)₂ and two metastable polymorphs, could be achieved for the first time. Since these data disagree in large parts with the known, previously reported values, all previous syntheses of Zn(N₃)₂, and for comparison Zn(N₃)₂?2.5 H₂O and Zn(OH)N₃ were reinvestigated, indicating that some of the earlier work has to be revised.     

Highly Conductive Anion‐Exchange Membranes from Microporous Tröger's Base Polymers

The development of polymeric anion‐exchange membranes (AEMs) combining high ion conductivity and long‐term stability is a major challenge for materials chemistry. AEMs with regularly distributed fixed cationic groups, based on the formation of microporous polymers containing the V‐shape rigid Tröger's base units, are reported for the first time. Despite their simple preparation, which involves only two synthetic steps using commercially available precursors, the polymers provide AEMs with exceptional hydroxide conductivity at relatively low ion‐exchange capacity, as well as a high swelling resistance and chemical stability. An unprecedented hydroxide conductivity of 164.4 mS cm^?1 is obtained at a relatively a low ion‐exchange capacity of 0.82 mmol g^?1 under optimal operating conditions. The exceptional anion conductivity appears related to the intrinsic microporosity of the charged polymer matrix, which facilitates rapid anion transport.     

Solvent and thiourea adsorption/intercalation effects on the solid-state electrochemistry of α-phase nickel hydroxide nanoparticles

Nanoparticles of α-phase nickel hydroxide were synthesized by a single-step hydrothermal method using urea as the hydrolytic agent. Precipitated powders were of pure turbostratic α-phase as confirmed by x-ray diffraction profile. The ageing of α-Ni(OH)₂ in 1.0 M alkali solutions is investigated for pure non-intercalated α-Ni(OH)₂ and thiourea intercalated/absorbed α-phase nanomaterials. The α-Ni(OH)₂ powder immobilized on the surface of graphite electrodes shows a gradual α→β phase transformation with continuous voltammetric cycling, and the concentration gradient of water that exists in the layered-double-hydroxide-like interlayers of α-phase and the solution was shown to play a crucial role on the high electrochemical activity of this phase nickel hydroxide. To understand the role of water in the ageing process, concomitant entries of non-aqueous solvents like ethanol and acetonitrile along with thiourea were effected. Cyclic voltammetric measurements of thiourea-treated α-Ni(OH)₂ samples revealed that hydroxyl ion influx during the anodic oxidation depends on the counter flux of solvent molecules, and if the intercalated the solvent is acetonitrile, then the electrochemical activity of α-Ni(OH)₂ reduced drastically; Q _a/Q _c>1 for water as solvent in the interlayers α-Ni(OH)₂ and Q _a/Q _c<1 for ethanol and acetonitrile as solvents. The α-phase gets stabilized in the presence of thiourea with water and ethanol as co-intercalates. Transmission electron microscope images of α-Ni(OH)₂ and thiourea-treated samples show a change in particle size and morphology. Elemental CHNS analysis confirms the presence of sulphur in the thiourea intercalated samples.     

Growing kinetics and structural characterization of oxide film formed on La-doped Co-40Cr alloy

The isothermal and cyclic oxidizing kinetics of Co-40Cr alloy and its lanthanum ion-implanted samples were studied at 1000℃ in air by thermal-gravity analysis (TGA). Scanning electronic microscopy (SEM) and transmission electronic microscopy (TEM)) were used to examine the oxidized film's morphology and the structure after oxidation. Secondary ion mass spectrum (SIMS) method was used to examine the binding energy change of chromium caused by La-doping and its in?uence on formation of Cr2O3 film. Laser Raman spectrum was used to examine the tress changes within oxidized films. It was found that lanthanum implantation remarkably reduced the isothermal oxidizing rate of Co-40Cr and improved the anti-cracking and anti-spalling properties of Cr2O3 film. The reasons were that the implanted lanthanum reduced the grain size and internal stress of Cr2O3 oxide, increased the high temperature plasticity of oxidized film. Lanthanum mainly existed in the outer surface of Cr2O3 film in the forms of fine La2O3 and LaCrO3 spinel particles.