单壁碳纳米管的结构修饰

由于单壁碳纳米管具有独特的结构、电学及机械等性能，可望在许多新领域得 到应用，已引起广泛的关注。但由于单壁碳纳米管不溶于水和常见的有机溶剂，极 大地制约了其应用性能的研究。随着单壁碳纳米管制备技术的不断完善，其研究方 向已开始转向结构修饰及应用性能的研究。主要介绍近年来单壁碳纳米管结构修饰 方面的最新发展状况，重点讨论化学功能化及物理吸附。     

静电纺丝法制备新型吸附分离材料

随着现代经济、工业的发展,许多环境问题出现在了人类面前,对于新型吸附分离材料的需求也变得十分迫切。静电纺丝法是一种简单有效制备连续纳米长丝的技术,有着十分广阔的应用前景。由于静电纺丝法制备的纤维膜具有较大的比表面积、易于调控的微观结构及化学性质,静电纺丝法能够用于制备新型的吸附分离材料。本文对电纺纤维膜的制备与改性,以及电纺纤维膜在空气过滤、油水分离、重金属离子去除等领域的应用进行了介绍,同时对其未来的发展进行了展望。     

A metal-organic framework with highly polar pore surfaces: selective CO2 adsorption and guest-dependent on/off emission properties

A 3D porous Zn(II) metal-organic framework {[Zn(2)(H(2)dht)(dht)(0.5)(azpy)(0.5)(H(2)O)]·4H(2)O} (1; H(2)dht=dihydroxyterphthalate, azpy=4,4'-azobipyridine) has been synthesised by employing 2,5-dihydroxyterephthalic acid (H(4)dht), a multidentate ligand and 4,4'-azobipyridine by solvent-diffusion techniques at room temperature. The as-synthesised framework furnishes two different types of channels: one calyx-shaped along the [001] direction and another rectangle-shaped along the [101] direction occupied by guest water molecules. The dehydrated framework, {[Zn(2)(H(2)dht)(dht)(0.5)(azpy)(0.5)]} (1') provides 52.7% void volume to the total unit-cell volume. The pore surfaces of 1' are decorated with unsaturated Zn(II) sites and pendant hydroxyl groups of H(2)dht linker, thereby resulting in a highly polar pore surface. The dehydrated framework 1' shows highly selective adsorption of CO(2) over other gases, such as N(2), H(2), O(2) and Ar, at 195 K. Photoluminescence studies revealed that compound 1 exhibits green emission (λ(max)≈530 nm) on the basis of the excited-state intramolecular proton-transfer (ESIPT) process of the H(2)dht linker; no emission was observed in dehydrated solid 1'. Such guest-induced on/off emission has been correlated to the structural transformation and concomitant breaking and reforming of the OH···OCO hydrogen-bonding interaction in the H(2)dht linker in 1'/1.     

ZIF-8材料中CH4/H2吸附与扩散的分子模拟

采用平衡分子动力学和巨正则系综蒙特卡洛模拟方法对多孔沸石咪唑酯骨架材料(ZIF-8)中CH4和H2分子的吸附与扩散特性进行了比较研究.结果表明,采用柔性力场能够很好地复制ZIF-8在不同压力或温度条件下的晶体结构,也能准确地计算不同温度下CH4和H2分子在ZIF-8中的扩散系数,特别是高温下CH4分子因能够摆脱ZIF-8骨架笼口的空间限制而使其扩散系数出现大幅提升.同时,该力场也能粗略地模拟CH4和H2分子在ZIF-8中的等温吸附曲线,通过自编程序得到吸附和扩散平衡时CH4和H2分子在ZIF-8单元晶胞内的几率密度分布数据,并利用VMD软件可视化.结果显示CH4和H2分子在ZIF-8中的优先吸附位置均在大孔中心靠近咪唑环的区域,但CH4分子的优先吸附位置有两个不同层次,而H2分子的优先吸附位置只有一个层次,说明CH4和H2分子在ZIF-8中存在着不同的吸附机理.     

RuNi双活性组分负载型TiO2催化CO2甲烷化反应研究

将液体吸附原位红外表征系统与红外光谱仪连接,是实现原位红外反应过程的重要技术环节. 原位红外表征过程中涉及的吸附液存储于液体吸附原位红外表征系统内,对一些沸点较高的液体可以通过加热套控温操作完成吸附,并在被测物质吸附反应过程中监测其结构变化. 系统可设置多个液体吸附池,实现在同一试验过程中进行多种液体切换吸附,满足被测物质吸附不同液体蒸汽的需求,还可以使被测物质吸附液体蒸汽,对固体表面进行惰性气体前处理或氢气还原处理. 最终通过原位红外监测出反应产物,实现液体吸附原位红外表征.     

中空介孔二氧化硅锚固聚偕胺肟吸附Cr(Ⅵ)

以硝酸铈铵为引发剂, 在自制的中空介孔二氧化硅(HMS)的空腔和通道内引发丙烯腈自由基聚合, 并将其氰基偕胺肟化, 用于制备具有吸附Cr(Ⅵ)的廉价有机无机复合吸附材料—中空介孔二氧化硅锚固聚偕胺肟. 通过傅里叶变换红外光谱(FTIR)、 扫描电子显微镜(SEM)及N₂吸附-脱附比表面分析对中空介孔二氧化硅锚固聚偕胺肟进行表征. 结果表明, 制备的中空微球直径约为400 nm, 其壁上孔径约为11.0 nm, 比表面积约为431 m²/g, 锚固聚偕胺肟后中空微球壁上孔道直径约为4.6 nm, 比表面积降低为347 m²/g. HMS锚固的聚偕胺肟对重铬酸钾溶液中铬的吸附量高达0.46 mmol/g, 吸附过程中伴随化学反应, 符合伪二级动力学模型, 可用作废水处理中重金属离子的高效廉价吸附材料.     

Effect of excess methanol addition on the morphology of sonogel-derived silica

Sonochemical processing techniques may be used to create fully miscible sols without the initial addition of a solvent. However, by intentionally adding excess alcohol to a sol produced by sonication, it is possible to manipulate the porosity of the resulting sonogel. Sonogels of systematically varied methanol content were prepared using a two-step process with subsequent drying at 60°C. The as-prepared sol with no excess methanol produced a purely microporous solid. The addition of excess methanol to the sol resulted in the formation of mixed microporosity and mesoporosity as revealed by nitrogen gas adsorption and transmission electron microscopy.     

Removal of H2S from Exhaust Gas by Use of Alkaline Activated Carbon

The purpose of this research was to select an activated carbon and alkaline solution blend that generated the best H₂S adsorption on alkaline-activated carbon. RB₂ (activated carbon) impregnated with NaOH solution was shown to have the optimum H₂S removal efficiency. The optimum NaOH concentration was 50 mg per gram of carbon. H₂S adsorption via RB₂-NaOH₅₀ was five times that of a corresponding fresh-activated carbon. The adsorption equivalent of H₂S is nearly 1 (mol-H₂S/mol-AOH), therefore, H₂S + AOH AHS + H₂O was the major reaction. The H₂S adsorption isotherm corresponded to the Freundlich isotherm.     

Sorption behavior of acidic herbicides on carbon nanotubes

Carbon nanotubes and graphitized carbon are investigated as adsorbents for solid phase extraction of dicamba and 2,4,5-T, two phenoxyalkanoic acid herbicides. These adsorbents have much greater adsorption capability than that of C₁₈ bonded silica, which was also tested for comparison studies. The adsorption capacity increases remarkably at lower pH of the sample solution. Freundlich isotherms were applied to analyze the data. Our studies suggest that carbon nanotubes have great potential applications in environmental analysis.