大跨度斜拉桥动力特性分析

本文提出一种计算大距度钢桁梁斜拉桥动力特性的方法。文中分别采用桁段有限单元、空间梁元、空间杆元计算斜拉桥中桁架，桥塔、拉索的刚度矩阵与质量矩阵，采用子空间迭代法求解特征方程，所得结果可供设计参考。     

Analytic solutions of a class of nonlinear partial differential equations

An approach is presented for computing the adjoint operator vector of a class of nonlinear （that is, partial-nonlinear） operator matrices by using the properties of conjugate operators to generalize a previous method proposed by the author. A unified theory is then given to solve a class of nonlinear （partial-nonlinear and including all linear） and non-homogeneous differential equations with a mathematical mechanization method. In other words, a transformation is constructed by homogenization and triangulation, which reduces the original system to a simpler diagonal system. Applications are given to solve some elasticity equations.     

梯形箱梁剪力滞后效应的精细化分析

引入剪滞翘曲应力自平衡条件的影响,考虑了剪切变形和剪滞效应等因素,设置了三个不同的剪滞纵向位移差函数以准确反映梯形箱梁不同宽度翼板的剪滞变化幅度,提出了一种能对工程中常用箱梁静力学特性分析的精确解法。本文以能量变分原理为基础建立了薄壁箱梁的弹性控制微分方程和自然边界条件,获得了相应广义位移的闭合解。算例中,分析了不同荷载形式、跨宽比和悬臂板长度等因素对箱梁静力学特性的影响,结果显示出引入剪滞翘曲应力自平衡条件的必要性。     

近断层地震作用下钢筋混凝土连续梁桥地震易损性分析

考虑桥墩、支座构件及主梁的碰撞损伤指标,对钢筋混凝土连续梁桥进行了地震易损性分析.综合考虑了结构参数的不确定性,从太平洋地震工程研究（Paciflc earthquake engineering research,PEER）数据库中随机选取了20条近场地震记录,得到大量的随机地震-结构样本.结合不同破坏状态下的桥梁损伤指标,根据结构的能力与需求得到了桥梁各构件及整体桥梁结构的地震易损性曲线.从概率意义上判断在强烈地震作用下桥梁结构所处的破坏状态,为今后在役的同类型桥梁震害预测提供了参考.     

端部激励相位差下斜拉索的非线性振动

斜拉桥中拉索承受着多种端部激励,可激发大幅空间振动．以斜拉索为对象,探究不同端部激励间相位差对其非线性振动的影响．首先,推导斜拉索无量纲离散控制方程,引入考虑相位的三向端部激励得到一般化模型;然后,针对拉索下端存在的纵桥向、竖向和横桥向激励的两两组合,受大幅或小幅激励,及其在主共振区或主参数共振区几组因素,共计12种工况,采用数值分析法分别研究了各工况下不同激励相位差时的斜拉索稳态响应．研究发现：激励相位差能加剧与激励频率相近的面内、外模态振动;在任意端部激励组合下,激励相位差不仅可使斜拉索非线性振动出现定量变化,还可改变内共振的表现形式．面内、外激励组合下,相位差对拉索响应幅值的影响以π为周期变化,且当相位差趋于π/2 + kπ (k = 0, 1, 2…)时影响最为突出;而面内激励组合下,以2π为变化周期,当相位差为π + 2kπ (k = 0, 1, 2, …)时其对稳态幅值的影响最显著．其原因是：面外激励关于拉索所在的竖直面对称,故其本质上以π为周期;而面内激励无此对称性,仍以2π为周期．因此,有无面外激励参与决定了激励间相位差对斜拉索响应的影响规律．     

共面闭合断续节理岩体直剪强度特性研究

介绍了节理面和岩桥各自的抗剪强度机制,引入法向变形协调条件,基于Mohr-Coulomb理论,推导了共面闭合断续节理岩体的直剪强度公式。模型试验发现,剪切破坏面以拉剪复合破坏为主,同时岩块中伴随大量的拉张微裂隙。试样的强度和变形具有明显的阶段性,全应力应变曲线主要经历了线弹性增长、节理面错动、次生裂纹起裂稳态扩展、节理面贯通破坏和残余强度5个阶段。对比发现,理论计算结果与试验值吻合较好。     

Ultrasonic treatment of water contaminated with various pollutants onto copper nanowires loaded on activated carbon using response surface methodology and artificial intelligent

In this study, the potential application of copper nanowires loaded on activated carbon for simultaneous removal of Disulfine blue (DB), Crystal violet (CV) and Sunset yellow (SY) has been described. The relation between adsorption properties with variables such as solution pH, adsorbent value, contact time and initial dyes concentration was investigated and optimized. A three‐layer artificial neural network (ANN) model was utilized to predict dyes removal (%) by adsorbent following conduction of experiments. The training of network at above mention experimental data confirms its ability to forecast the removal performance with a linear transfer function (purelin) at output layer. The Levenberg–Marquardt algorithm and tangent sigmoid transfer function (tansig) with 16 neurons at the hidden layer was applied. Parameters were optimized by central composite design (CCD) combined with response surface methodology (RSM) and desirability function. The accuracy of ANN was judged according to both MSE and AAD% at optimal conditions and results indicate its superiority to RSM model in term of higher R² and lower AAD% values. This observation was also corroborated by the parity plots between the predicted and experimental values. The ANN model was better in both data fitting and prediction capability in comparison to RSM model.     

Synthesis of CuS nanoparticles loaded on activated carbon composite for ultrasound‐assisted adsorption removal of dye pollutants: Process optimization using CCD‐RSM,equilibrium and kinetic studies

In this study, the CuS nanoparticles loaded on activated carbon (CuS‐NPs‐AC) composite was synthesized and then, characterized by XRD and FE‐SEM analyses. The prepared composite was used as a potential adsorbent for the simultaneous ultrasound‐assisted removal of Indigo Carmine (IC) and Safranin‐O (SO). The CuS‐NPs‐AC dose (0.01‐0.03 g), sonication time (1‐5 min), initial SO concentration (5‐15 mg L^‐1) and initial IC concentration (5‐15 mg L^‐1) as expectable effective parameters were studied by central composite design (CCD) under response surface methodology (RSM) to obtain an useful knowledge about the effect of simultaneous interaction between IC and SO on their removal percentage. The optimum SO and IC removal percentages were determined to be 98.24 and 97.15% at pH = 6, 0.03 g of the CuS‐NPs‐AC, 3 min sonication time, 12 and 10 mg L^‐1 of IC and SO. The values of coefficient of determination (R²) for SO and IC were 0.9608 and 0.9796, respectively, indicating the favorable fitness of the experimental data to the second order polynomial regression model. The isotherm data were well correlated with Freundlich model. The maximum monolayer adsorption capacities of 87.5 and 69.90 mg g^‐1 at room temperature for IC and SO in the investigated binary system expressed the high efficiency of the novel adsorbent for water cleanup within a short time. The investigation of correlation between time and rate of adsorption revealed that IC and SO adsorption onto the CuS‐NPs‐AC followed pseudo‐second‐order and intra‐particle diffusion simultaneously.     

磁旋光反射腔交流调制输出倍频信号特性分析

根据法拉第效应的非互易性原理,分析了磁旋光反射腔交流调制输出倍频信号相关的特性;具体研究了倍频信号幅度及角度检测灵敏度与调制角幅度θ0和反射腔反射率R的关系.研究结果表明:当调制角幅度较小时,输出倍频信号幅度随反射率R的增加而增加,最大值是正交调制法的18倍左右;利用倍频信号检测角度的灵敏度与正交法相比也得到多倍提高,...