压缩偶相干态的制备及其非经典特性

通过保持非耗散介观LC电路的固有频率不变，而使电路参数作阶跃函数变化，就可将介观LC电路由初始的偶相干态制备到压缩偶相干态；在压缩偶相干态下，介观电路系统不仅有非经典的量子压缩效应，而且有非经典的反聚束效应. 关键词： 介观LC电路 单位阶跃函数 压缩算符 压缩偶相干态     

α，ω-二羧基-甲基丙烯酸丁酯低聚物的合成及MS分析

利用传统自由基聚合法，在四氢呋喃溶液中自由基引发聚合甲基丙烯酸丁酯单体而得到ω-羧基-甲基丙烯酸丁酯低聚物(CTBMA)(分子量在1500左右)；利用CTBMA末端酯基的反应特性，在二氧六环／水／KOH混合溶液中皂化CTBMA，使之转化为α，ω-羧基甲基丙烯酸丁酯低聚物(di-CTBMA)；研究了溶剂的类别、反应时间等反应条件对皂化产物结构的影响；利用MALDI-TOF-MS及LSIMS对皂化各阶段产物进行了分析监测．实验表明，在适当的皂化条件下，CTBMA皂化时主要为末端酯基转化为羧基，相应得到的产物di-CTMBA具有很好的结构特性，其官能团度(functionality)接近2．     

Two new asterosaponins from the starfish Asterias rubens: application of a cryogenic NMR probe head

We report two new asterosaponins from the Baltic starfish Asterias rubens along with their ¹H and ¹³C NMR data. The compounds were isolated after on‐flow liquid chromatography–NMR–mass spectrometry screening indicated that they had not been identified before. The one‐ and two‐dimensional NMR experiments used to elucidate the structures were recorded using a 5 mm cryogenic probe head. The advantages of cryogenic probes for this kind of examination in comparison with conventional probe heads are discussed. Copyright © 2003 John Wiley & Sons, Ltd.     

巴旦杏中脂肪酸的测定

采用气相色谱仪进行定量分析，气－联质联用仪进行定性分析，巴旦杏中脂肪酸进行了测定，并探讨了样品处理方法和气－质联用仪的分析条件，得到了较为满意的分析结果。     

Applications of fast atom bombardment mass spectrometry (FAB MS) to organometallic and coordination chemistry

This article describes the technique of fast atom bombardment mass spectrometry (FAB MS) and its applications to the analysis of organometallic and coordination complexes. Sections on ion generation and matrices are followed by a Periodic Group-based review of FAB MS results obtained from Transition Metal and Main Group compounds, organometallic cluster carbonyls and their derivatives, and salts of poly-oxo-anions. The literature has been surveyed from 1981 to approximately mid-1986.     

退火温度对Fe基纳米晶粉芯磁致频移特性影响的研究

研究了充有不同温度退火Fe基纳米晶粉芯LC回路的磁致频移特性（MFS），发现充有不同温度退火Fe基纳米晶粉芯LC回路的磁致频移不同，充有经600℃退火Fe基纳米晶粉芯LC回路的磁致频移最灵敏。     

Determination of iphosphamide and seven metabolites in blood plasma,as stable trifluoroacetyl derivatives,by electron capture chemical ionization GC-MS

A method is described for the determination of the antitumor agent iphosphamide and seven of its metabolites in the plasma of cancer patients by multiple ion monitoring (MIM) GC-MS, mainly using the electron capture chemical ionization mode, of stable methyl and/or trifluoroacetyl derivatives. The metabolites determined were 2- and 3-dechloroethyliphosphamide, 4-ketoiphosphamide, carboxyiphosphamide, iphosphamide mustard, and two previously undetected metabolites, chloroethylamine and 1,3-oxazolidine-2-one. The isolation of the acidic and neutral metabolites was performed by solid phase extraction on to C₁₈ adsorbent at pH 4. The weakly acidic iphosphamide mustard, isolated under these conditions with a yield of ca 50%, was measured as a stable methyltrifluoroacetyl derivative, in contrast to the corresponding phosphoramide mustard of the isomer cyclophosphamide which decomposes during derivatization. Chloroethylamine and 1,3-oxazolidine-2-one were isolated with high yield by liquid extraction with ethyl acetate at pH 10. Selective measurement of several metabolite derivatives with similar retention times was performed by multiple ion monitoring MS of specific ion masses, using a methyl phenyl siloxane capillary column previously employed in the study of cyclophosphamide metabolites. Quantitation of metabolites in patient plasma samples could be performed in the concentration range 3 ng to 20 μg per ml of original plasma.     

Unexpected end‐groups of poly(acrylic acid) prepared by RAFT polymerization

Low‐molecular‐weight poly(acrylic acid) (PAA) was synthesized by reversible addition fragmentation chain transfer polymerization with a trithiocarbonate as chain‐transfer agent (CTA). With a combination of NMR spectroscopy and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry, the PAA end‐groups of the polymer were analyzed before and after neutralization by sodium hydroxide. The polymer prior to neutralization is made up of the expected trithiocarbonate chain‐ends and of the H‐terminated chains issued from a reaction of transfer to solvent. After neutralization, the trithiocarbonates are transformed into thiols, disulfides, thiolactones, and additional H‐terminated chains. By quantifying the different end‐groups, it was possible to demonstrate that fragmentation is the rate limiting step in the transfer reaction. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5439–5462, 2004     

Photooxidation of aqueous trichloroethylene using a buoyant photocatalyst with reaction progress monitored via micro-headspace GC/MS

Although photooxidation has previously been shown to be successful in removing organic contaminants from water, methods combining the rapid photooxidation of the desired contaminant with easy catalyst manipulation and removal are few and far between. In the absence of an easy means of catalyst removal, the photooxidation process becomes more costly and time consuming, and photocatalysis cannot be employed as an in situ method for the remediation of aqueous organic contaminants. In this study, the photocatalyst was added to an aqueous trichloroethylene (TCE) solution in the form of TiO₂-coated buoyant microspheres. The solution, placed in a flow-cell photoreactor along with the buoyant catalyst, was irradiated with a UV-filtered Xenon light source. Limited sample sizes necessitated the development of a low-cost headspace GC/MS analysis method, utilizing a standard direct-injection autosampler. This analytical technique aptly monitored reaction progress and indicated that aqueous TCE concentration decreases by nearly 90% in the first hour of irradiation. Subsequent solvent extraction GC/MS analysis indicated that the TCE is initially sorbed by the photocatalyst spheres, but as irradiation continued, TCE is removed from the catalyst spheres surfaces. During the course of irradiation, the expected TCE mineralization product hydrochloric acid appeared, as indicated by a decrease in pH and ion chromatography analysis. The microsphere-born catalyst was easily removed from the treated solution by filtration. Thus, it is possible that a method for effective, low-cost in situ photooxidation of aqueous organic contaminants will be realized in the near future.     

Ion chromatography–inductively coupled plasma mass spectrometry determination of arsenic species in marine samples

Arsenic speciation analysis in marine samples was performed using ion chromatography (IC) with inductively coupled plasma mass spectrometry (ICP‐MS) detection. The separation of eight arsenic species, viz. arsenite, monomethyl arsonic acid, dimethylarsinic acid, arsenate, arsenobetaine, tetramethylarsine oxide, arsenocholine and tetramethylarsonium ion was achieved on a Dionex AS4A (weaker anion exchange column) by using a nitric acid pH gradient eluent (pH 3.3 to 1.3). The entire separation was accomplished in 12 min. The detection limits for the eight arsenic species by IC–ICP‐MS were in the range 0.03–1.6 µ g l^?1, based on 3σ of the blank response (n = 6). The repeatability and day‐to‐day reproducibility were calculated to be less than 10% (residual standard deviation) for all eight species. The method was validated by analyzing a certified reference material (DORM‐2, dogfish muscle) and then successfully applied to several marine samples, e.g. oyster, fish muscle, shrimp and marine algae. The low power microwave digestion was employed for the extraction of arsenic from seafood products. Copyright © 2004 John Wiley & Sons, Ltd.