Determination of hydroxycarbamates in aqueous matrices by direct derivatization and GC-MS analysis in chemical ionization mode

A rapid and effective procedure, developed for the determination of polar compounds in water, has been applied to hydroxycarbamates. In few minutes, it is possible to perform a catalyzed derivatization of such compounds directly in the aqueous medium, using n-hexyl chloroformate. Extraction with n-hexane and injection into a benchtop GC-MS system are the only two further steps to complete the analysis. Chemical ionization proved to be more effective than electron impact to produce valuable mass spectra in terms of selectivity and sensitivity. Linear quantitative responses were demonstrated over a two-order-of-magnitude range. The minimum detectable concentration was 3 ppb for acetohydroxamic acid and 10 ppb for hydroxyurethane, obtained from Po river water samples spiked with the two hydroxycarbamate standards.     

Tight-binding molecular dynamics simulation of ZnSe liquid within the local environment dependence

We investigate the structural, electronic and dynamical properties of ZnSe liquid using tight-binding molecular dynamics (TBMD) simulations. We report the TBMD calculations for the solid and liquid forms of the ZnSe compound. To produce more realistic results the TB model includes the local environment dependence in the Hamiltonian matrix at finite temperature for ZnSe. To further demonstrate the efficiency of the TBMD approach, we present results for finite temperature physical properties of ZnSe liquid. We are able to show good agreement with experiment for the atomic mean-squared displacement and melting point.     

Development and validation of HPLC method for simultaneous estimation of piperine and guggulsterones in compound Unani formulation (tablets) and a nanoreservoir system

An attempt has been made to develop and validate a simultaneous HPLC method for novel approach of drug release via oil‐in‐water (o/w) nanoemulsion formulation and Habb‐e‐Khardal Unani tablet containing piperine and guggul sterones E and Z as main ingredients. Nanoemulsion was prepared by titration method using sefsol‐218 as an oily phase, cremophor‐EL as a surfactant, transcutol as a co‐surfactant and distilled water as an aqueous phase. The formulation was optimized on the basis of thermodynamic stability and dispersibilty test. The nanoformulation was evaluated for particle size, surface morphology, electrical conductivity and viscosity determination. The in vitro dissolution was carried out by dialysis bag method. Drugs were quantified using an HPLC method developed in‐house with a C₁₈ column as stationary phase and acetonitrile and water as mobile phase at λ_max of 240 nm. The optimized formulation showed higher drug release, lower droplet size and less viscosity as compared with the conventional Habb‐e‐Khardal Unani tablet. The present study illustrated the potential of nanoemulsion dosage form in improving biopharmaceutic performance of piperine and guggul sterone. The HPLC method was also found to be quite sufficient for the routine quality control of formulations containing piperine and guggul sterone E and Z as ingredients and also for in vitro drug release studies. Copyright © 2011 John Wiley & Sons, Ltd.     

Determination of quinolones in milk samples using a combination of magnetic solid-phase extraction and capillary electrophoresis

A magnetic solid-phase extraction (MSPE) method combined with capillary electrophoresis for the simultaneous determination of seven quinolones (QNs) (danofloxacin, ciprofloxacin, marbofloxacin, enrofloxacin, difloxacin, oxolinic acid, and flumequine), using (S)-(+)-6-methoxy-α-methyl-2-naphthaleneacetic acid as internal standard, in milk samples was developed. The variables involved in the preconcentration magnetic procedure were: the composition of the magnetic support composition, the sample pH, and the weight of magnetic adsorbent used. The variables were optimized using a simplex-lattice design. Different magnetite covered with octyl-phenyl silica adsorbents were synthesized by varying the molar ratio of phenyltrimethylsilane and octyltrimethoxysilane; the solids were evaluated for QN preconcentration. Under optimal conditions, a linear range was obtained from 27 to 1000 μg L(-1) with limits of detection ranging from 9 to 12 μg L(-1) for the seven QNs. The absolute recoveries of the seven QNs at three different spiked levels (40, 150, and 400 μg L(-1) ) ranged from 74% to 98% with a relative standard deviation less than 10% in all cases. The proposed method was applied to analyze 20 whole milk samples of different brands. All samples were positive for the presence of QN residues; in some cases, extract dilution was required. The concentrations found are in the range from 31.1 to 5047.3 μg L(-1) . Marbofloxacin was the most frequently found. The method proposed offers advantages in terms of simplicity, sensitivity, efficiency, cost, and analysis time making it an alternative for the analysis of QNs in whole milk samples.     

Direct evaluation of individual hydrogen bond energy in situ in intra- and intermolecular multiple hydrogen bonds system

The results of evaluating the individual hydrogen bond (H-bond) strength are expected to be helpful for the rational design of new strategies for molecular recognition or supramolecular assemblies. Unfortunately, there is few obvious and unambiguous means of evaluating the energy of a single H-bond within a multiple H-bonds system. We present a local analytic model, ABEEMσπ H-bond energy (HBE) model based on ab initio calculations (MP2) as benchmark, to directly and rapidly evaluate the individual HBE in situ in inter- and intramolecular multiple H-bonds system. This model describes the HBE as the sum of electrostatic and van der Waals (vdW) interactions which all depend upon the geometry and environment, and the ambient environment of H-bond in the model is accounted fairly. Thus, it can fairly consider the cooperative effect and secondary effect. The application range of ABEEMσπ HBE model is rather wide. This work has discussed the individual H-bond in DNA base pair and protein peptide dimers. The results indicate that the interactions among donor H atom, acceptor atom as well as those atoms connected to them with 1,2 or 1,3 relationships are all important for evaluating the HBE, although the interaction between the donor H atom and the acceptor atom is large. Furthermore, our model quantitatively indicates the polarization ability of N, O, and S in a new style, and gives the percentage of the polarization effect in HBE, which can not be given by fixed partial charge force field.     

Direct chiral resolution of cloquintocet-mexyl and its application to in vitro degradation combined with clodinafop-propargyl

A simple chiral high‐performance liquid chromatography (HPLC) method with ultraviolet (UV) detection was developed and validated for measuring Cloquintocet‐mexyl (ClM) enantiomers and clodinafop‐propargyl (CP) using cellulose tris‐(3,5‐dimethylphenylcarbamate) (CDMPC) as chiral stationary phase (CSP). The effects of mobile phase composition and column temperature on the ClM enantiomer separation were investigated. Good separation was achieved by using a mixture of n‐hexane and n‐propanol as mobile phase. Based on the chiral HPLC method, enantioselective quantitative determination analysis methods for this herbicide combined with CP in diluted plasma were developed and validated. The assay method was linear over a range of concentrations (0.5–100 µg/mL) in diluted plasma and the mean recovery was greater than 80% for both enantiomers and CP. The limits of quantification and detection for both ClM enantiomers and CP were 0.5 and 0.2 µg/mL, respectively. Intra‐ and interday relative standard deviations did not exceed 10% for three tested concentrations. The result suggested that the degradation of ClM enantiomers was stereoselective in rabbit plasma, and both rac‐ClM and CP degraded quickly in plasma, showing that the main existing forms with biological effect in animals are their metabolites. Copyright © 2011 John Wiley & Sons, Ltd.     

The 2‐Cyano‐2,2‐dimethylethanimine‐N‐oxymethyl Group for the 2′‐Hydroxyl Protection of Ribonucleosides in the Solid‐Phase Synthesis of RNA Sequences

The reaction of 2‐cyano‐2‐methyl propanal with 2′‐O‐aminooxymethylribonucleosides leads to stable and yet reversible 2′‐O‐(2‐cyano‐2,2‐dimethylethanimine‐N‐oxymethyl)ribonucleosides. Following N‐protection of the nucleobases, 5′‐dimethoxytritylation and 3′‐phosphitylation, the resulting 2′‐protected ribonucleoside phosphoramidite monomers are employed in the solid‐phase synthesis of three chimeric RNA sequences, each differing in their ratios of purine/pyrimidine. When the activation of phosphoramidite monomers is performed in the presence of 5‐benzylthio‐1H‐tetrazole, coupling efficiencies averaging 99 % are obtained within 180 s. Upon completion of the RNA‐chain assemblies, removal of the nucleobase and phosphate protecting groups and release of the sequences from the solid support are carried out under standard basic conditions, whereas the cleavage of 2′‐O‐(2‐cyano‐2,2‐dimethylethanimine‐N‐oxymethyl) protective groups is effected (without releasing RNA alkylating side‐products) by treatment with tetra‐n‐butylammonium fluoride (0.5 m) in dry DMSO over a period of 24–48 h at 55 °C. Characterization of the fully deprotected RNA sequences by polyacrylamide gel electrophoresis (PAGE), enzymatic hydrolysis, and matrix‐assisted laser desorption/ionization (MALDI) mass spectrometry confirmed the identity and quality of these sequences. Thus, the use of 2′‐O‐aminooxymethylribonucleosides in the design of new 2′‐hydroxyl protecting groups is a powerful approach to the development of a straightforward, efficient, and cost‐effective method for the chemical synthesis of high‐quality RNA sequences in the framework of RNA interference applications.