Study of the Behavior of an EC Mechanism Using Cyclic and Derivative Chronopotentiometric Techniques with Spherical Electrodes

The theory for an EC mechanism in chronopotentiometric techniques – reversal chronopotentiometry, cyclic chronopotentiometry and reciprocal derivative chronopotentiometry – is developed. The equations of this article are valid for spherical electrodes of any size and present a compact and easy‐to‐manage form. Methods for determining kinetic parameters of the chemical reaction are proposed and the influence of the electrode radius is discussed. We conclude that large errors in the determination of these parameters are committed if electrode sphericity is neglected. Reciprocal derivative chronopotentiometry has been applied in its traditional form (dt/dE vs. E), and in a more recently proposed modality consisting of plotting dt^1/2/dE vs. E. These techniques are very convenient for studying an EC mechanism since the response is obtained in the form of peaks which are quantitatively related to the kinetic parameters of the chemical reaction. A comparison of the chronopotentiometric methods analyzed leads us to conclude that working curves based on the dt^1/2/dE vs. E curves are more suitable to obtain accurate values of the rate constants of the chemical reaction.     

The reactivity of 3-methyl- and 5-methyl-1-vinylpyrazoles in free-radical polymerization

3-Methyl-l-vinylpyrazole (M3VP) and 5-methyl-1-vinylpyrazole (M5VP) were isolated as individual substances by vacuum rectification of their mixture (M3VP: M5VP 60 40). For each of them the kinetics of free-radical polymerization in MeOH were measured at low conversions. In both cases the rate of polymerization is proportional to 0.5 order with respect to the initiator (AIBN) concentration. On the other hand, a first order of reaction with respect to monomer concentration is observed only when the latter is relatively low (3M). At higher initial concentrations of monomers the order of reaction becomes less than unity. The overall rate of polymerization for M5VP was higher than for M3VP, whereas the initiation rate remained constant in the whole range of monomer concentrations and did not depend on the exact structure of the monomer. The difference in the rates of polymerization observed for M3VP and M5VP is probably connected with the difference in the key parameterk _p/k _t ^1/2 for each of the two isomers. It is concluded that the correct kinetic information about homo- and co-polymerization of M3VP and M5VP cannot be obtained without their adequate separation.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 413–415, February, 1993.     

Enhanced Kinetic Isotope Effect of the Phosphate-Catalyzed Proton Exchange in N,N'-Dimethylurea

The concerted mechanism of phosphate-catalyzed proton exchange in N,N'-dimethylurea has been studied. Kinetic data were measured using the technigue of NMR line-shape analysis. A significant kinetic isotope effect was observed for the concerted proton transfer in N,N'-dimethylurea and is attributed to the tunnelling effect.     

Kinetics of the amorphous—anatase phase transformation in copper doped titanium oxide

Samples of TiO₂ doped with 2 and 5 mol% of Cu²⁺ were prepared by the sol-gel process. Titanium(IV) isopropoxide and copper(II) nitrate were used as precursors. The samples were prepared as monolithic shapes, dried at 80°C for 72 h and heat treated at various temperatures in the range 200–900°C for 2 h. The structural transformation and texture of the samples were investigated by X-ray powder diffraction (XRD) and nitrogen adsorption. Significant changes were observed during the crystallization process; on the one hand, the crystallization profiles show that crystallization occurs uniformly and is practically insensitive to the dopant concentration, but when the transformation at a given temperature is followed as a function of time, the rate of the amorphous-anatase transformation is larger for the sample containing 2 mol% Cu²⁺. Electron spin resonance (ESR) results show that in this sample there is no segregation of Cu²⁺ ions. The sample containing 2 mol% of Cu²⁺ was selected for the kinetic studies and the temperatures selected were 300, 325, 350, 375 and 400°C, which were taken from the amorphous to anatase crystallization profile. An activation energy of 137 ± 4 kJ/mol for the crystallization process was estimated from the kinetic data. These results showed that the effect of the open structure present in the TiO₂ amorphous phase provides the atomic mobility required for the crystallization. On the other hand, the differences in the crystallization rate due to the amount of Cu²⁺ were explained by the segregation of copper ions to the surface of the samples.     

First lipase catalysed resolution of epoxy enol esters

We report the first enzyme-catalysed kinetic resolution of epoxy enol esters. The lipase-promoted hydrolysis of these compounds provided α-hydroxyketones or α-hydroxyaldehydes (arising from the spontaneous rearrangement of the epoxy enols) and the residual esters with moderate to good enantioselectivity (E up to 100).     

Cure kinetics of epoxy-amine resins used in the restoration of works of art from glass or ceramic

The cure kinetics of two epoxy/amine resins, Araldite 2020 and AY103-HY956 widely used as adhesives in the restoration of works of art from glass or ceramic was investigated using FTIR spectroscopy. These resins are two-part adhesives, consisting of a resin - A, based on a diglycidyl ether of bisphenol A, and a hardener - B which is either a cycloaliphatic amine (isophorone diamine) for Araldite 2020, or a mixture of three aliphatic amines in HY956. The study was based on the collection of IR spectra, in the middle range (4000-600 cm⁻¹), of mixtures of resin and hardener at different proportions and isothermal temperatures (22-70 °C) as a function of curing time. A kinetic model was employed to simulate the experimental data using two kinetic rate constants. Diffusion control was incorporated to describe the cure behaviour at high degrees of conversion. From fitting to experimental data the kinetic and diffusional parameters were estimated, together with the activation energies of the kinetic and autocatalytic rate constants. It was found that higher degrees of curing are obtained at higher temperatures and increased amounts of hardener. Differences in the performance of the two adhesives are explained based on the type of the amines used as hardener.     

固相热分解反应最可几机制的判断

固相热分解反应最可几机制的判断高永煜，邹文樵，冯仰婕（华东理工大学化学系上海２００２３７）关键词热分解，动力学方程，反应机制固相热分解反应机制的判断，是热分析动力学中令人感兴趣的领域。常用的方法是从含机制函数的非等温积分动力学方程出发，分别用Ｓｅｓｔ...     

Kinetic Spectrophotometric Determination of Ritodrine Hydrochloride in Dosage Forms

A simple and sensitive kinetic method was developed for the determination of ritodrine hydrochloride in pharmaceutical preparations. The method is based upon a kinetic investigation of the oxidation reaction of the drug with alkaline potassium permenganate at room temperature for a fixed 12.5 min; the absorbance of the colored permenganate ion was measured at 609 nm. The absorbance concentration plots were rectilinear over the range of 1.6–11.2 μg mL^?1 (r = 0.9992) with a minimum detectability of 0.096 μgmL^?1 (2.88 × 10^?7 M). The different experimental parameters affecting the development and stability of color were carefully studied and optimized. The determination of ritodrine hydrochloride by the fixed concentration and rate constant methods is also feasible with the calibration equations obtained, but the fixed time method has been found to be more applicable. The proposed method was applied successfully to the determination of ritodrine hydrochloride in tablets and ampoules with average recoveries of 100.37 ± 0.93% and 100.42 ± 0.87%, respectively. The results obtained were in good agreement with those obtained using a reference method for comparison. A proposal of the reaction pathway is also presented.     

Application of heat conduction calorimetry to high explosives

This paper describes some thermal analysis experiments conducted on high explosive samples. These employ differential scanning calorimetry to monitor thermal effects at elevated temperatures (around 200 °C) and heat conduction calorimetry to record thermal effects at much lower temperatures (below 100 °C).The work shows that, due to the generally high thermal stability of many high explosive compositions, heat generation rates are very low, if detectable at all, at normal storage temperatures, even when using a very sensitive instrument. The sensitivity and reproducibility of this technique has been investigated in detail by Wilker et al. [S. Wilker, U. Ticmanis, G. Pantel, Detailed investigation of sensitivity and reproducibility of heat flow calorimetry, in: Proceedings of the 11th Symposium on Chemical Problems Connected with the Stability of Explosives, Sweden, 1998] and shown to be capable of recording heat generation rates of less than a microwatt. This allows continuous measurement of decomposition processes in nitrate ester based propellants at temperatures as low as 40 °C. However, the measurement of very low levels of heat generation is difficult, time consuming and therefore expensive. If the assumption is made that the life limiting process is invariably the slow decomposition of the energetic component, this will frequently lead to very long service lifetime predictions.A number of possible complications are identified. Firstly, due to its low detection threshold, a heat conduction calorimeter may detect other reactions which will not lead to failure, but which may still dominate the heat flow signal. Secondly, the true failure process may generate little energy and be overlooked. In view of these considerations, at present it seems unwise to rely on heat conduction microcalorimetry as the only tool for the assessment of the life of high explosive energetic systems.Based on examples of life terminating processes in high explosives during storage and use, it is clear that decomposition of the energetic material is not invariably the cause of system failure. It is also by no means the only reaction that may take place in, and be observed by, a heat conduction calorimeter.     

A kinetic method for <Emphasis Type="Italic">para</Emphasis>-nitrophenol determination based on its inhibitory effect on the catalatic reaction of catalase

The inhibitory effect of para-nitrophenol on the catalytic reaction of catalase was investigated. Michaelis-Menten kinetic parameters were determined from Lineweaver-Burk plots obtained in the absence or in the presence of the inhibitor. The inhibitor pattern, revealed by the Lineweaver-Burk plots, suggested a fully mixed inhibition mechanism. Spectrophotometric monitoring of the indicator reaction: in conjunction with initial rate measurements was employed for the kinetic determination of the inhibitor. Calibration plots of initial rate vs. para-nitrophenol concentration were linear in the concentration range 0.9·10⁻⁵–2.5·10⁻⁵ mol/L and the detection limit was 3·10⁻⁶ mol/L (417 μg/L) para-nitrophenol. Interferences from other phenolic compounds like orto-cresole, meta-and orto-nitrophenol were observed.