Sorptive elimination of fluoride from contaminated groundwater in a fixed bed column: A kinetic model validation based study

The current investigation involves a continuous adsorption experiment in a packed bed column for the sorptive elucidation of fluoride from contaminated groundwater using an activated soil-clay mixture. Through the combination of naturally accessible laterite soil with silica enriched clay (3:1 ratio), a low-cost Al–Si heterogeneous material has been developed. Following detailed characterization, the developed materials were employed in a long-time column process to achieve a high degree of fluoride separation from real-world groundwater. In a packed bed column investigation, the effect of bed height, initial fluoride concentration, and flow rate on the breakthrough properties of the adsorption system were investigated. By using a non-linear regression equation, three model kinetics, such as the Thomas Model, Adams-Bohart Model, and Yoon-Nelson Model, were fitted to validate the column-based experimental data, by analysing the breakthrough curves profiles, and distinct kinetic parameters. The Bed Depth Service Time Analysis (BDST) model was tested to express the effect of bed height on breakthrough curves, as well as to predict the time for breakthrough, and material depletion under optimal conditions. The Thomas and Yoon-Nelson models were identified to be the most appropriate ones for describing the entire breakthrough curve, whereas the Adams-Bohart model was only utilised to predict the first half of the dynamic process. With correlation coefficients (R²) 0.96, the experimental results were well suited to Thomas, Yoon-Nelson, and Adams-Bohart models. Finally, regeneration assessment was carried out where even after four cycles of operation, regenerated adsorbent showed a rejection efficacy of 78% to fluoride that proves the viability of the material and methodology.     

Selection of the most effective kinetic model of lactase hydrolysis by immobilized Aspergillus niger and free β-galactosidase

The kinetic model of the hydrolysis of lactose by β-galactosidase from Aspergillus niger immobilized on a commercial ceramic monoliths was estimated in the attendance of lactose and its hydrolysis reaction products galactose and glucose. The aim of this work was to developing kinetic model of lactase hydrolysis by Aspergillus niger. The variables in this study are temperature, pH, enzyme concentration, substrate concentration and final product. The optimum temperature used to achieve the best hydrolysis performance in the kinetic model selection was 55 and 60 °C. The optimum pH used for enzyme activity was about 3.5 to 4. Five kinetic models were proposed to confirm experimental data the enzymatic reaction of the lactose hydrolysis by the β-galactosidase. The kinetics of lactose hydrolysis by both Immobilized and soluble lactases were scrutinized in a batch reactor system in the lack of any mass conduction restriction. In both instance the galactose inhibition kinetic models predicted the experimental data. The model is capable to fit the experimental data correctly in the extensive experimental span studied.     

Screening,isolation and selection of a potent lipase producing microorganism and its use in the kinetic resolution of drug intermediates

Lipases are ubiquitous enzymes that belong to family of serine hydolases with a wide variety of industrial applications. This study reports isolation, screening and identification of enantioselctive lipase producing microorganism for kinetic resolution of racemic alcohols. For this, we collected soil samples from different oil rich environments and we performed primary screening that was by carried out by using MSM-tributryin clear zone assay. The selected samples from first screen were subjected to secondary screening to distinguish lipase producing strains from esterase producing strains using p-nitrophenyl palmitate lipase assay. In tertiary screening, 16 lipase producing strains that were identified in secondary screening were employed for resolution of 5 different (RS)-alcohols. Out of all 16 lipase producing strains, only one strain selectively converted 3 racemic alcohols. Based on morphological, biochemical and physiological characteristics, and 16S rRNA gene sequencing, the strain was identified as Pseudomonas beteli. The strain was found to be S-selective and there been no reports on use of Pseudomonas beteli lipase for kinetic resolution of alcohols. The lipase activity was further increased by media optimization and by improving growth conditions, and production of lipase in shake flask study as well as in laboratory scale fermenter. The optimum time for enzyme production by Pseudomonas beteli was 96 ​h whereas cell mass growth was highest at 72 ​h. Optimum temperature and pH were 30 ​°C and 6, respectively. Beef extract (5 ​g/L), peptone (5 ​g/L), sodium chloride (5 ​g/L), yeast extract (1 ​g/L) and glucose (5 ​g/L) were found as optimum nutrition sources for the cell mass growth and lipase production by Pseudomonas sp. Overall, 3.4 times higher enzyme activity and 2.75 times higher cell mass growth were achieved in bioreactor in comparison to the shake flask study. Lipase having high titer was employed successfully for the kinetic resolution of several drug intermediates.     

Catalytic and kinetic spectrophotometric method for determination of vanadium(V) by 2,3,4-trihydroxyacetophenonephenylhydrazone

A new catalytic and kinetic spectrophotometric method for the determination of vanadium(V) was studied using 2,3,4-trihydroxyacetophenonephenylhydrazone (THAPPH) as an analytical reagent. The present method was developed on the catalytic effect of vanadium on oxidation of THAPPH by hydrogen peroxide in hydrochloric acid–potassium chloride buffer (pH = 2.8) at the 20th minute. The metal ion has formed 1:2 (M:L) complex with THAPPH. Beer’s law was obeyed in the range 20–120 ng/mL of V(V) at λ_max 390 nm. The sensitivity of the method was calculated in terms of molar absorptivity (1.999 × 10⁵ L mol⁻¹cm⁻¹) and Sandell’s sensitivity (0.000254 μg cm⁻²), shows that this method is more sensitive. The standard deviation (0.0022), relative standard deviation (0.56%), confidence limit (±0.0015) and standard error (0.0007) revealed that the developed method has more precision and accuracy. The stability constant was calculated with the help of Asmu’s (9.411 × 10⁻¹¹) and Edmond’s & Birnbaum’s (9.504 × 10⁻¹¹) methods at room temperature. The interfering effect of various cations and anions was also studied. The present method was successfully applied for the determination of vanadium(V) in environmental and alloy samples. The method’s validity was checked by comparing the results obtained with atomic-absorption spectrophotometry and also by evaluation of results using F-test.     

Synthesis of Star-like Polybutadienes by a Combination of Living Anionic Polymerization and “Click” Coupling Method

Three-arm and four-arm star-like polybutadienes(PBds) were synthesized via the combination of living anionic polymerization and the click coupling method. Kinetic study showed that the click reaction between the azido group terminated PBd-t-N3 and the alkyne-containing multifunctional linking reagent was fast and highly efficient. All coupling reactions were fully accomplished within 40 min at 50 °C in toluene in the presence of the reducing agent Cu(0), proven by 1H-NMR, FTIR and GPC measurements. For the coupling reactions between the PBd-t-N3 polymer and dialkyne-containing compound, the final conversion of the coupled PBd-PBd polymer was ca. 97.0%. When a PBd-t-N3 polymer was reacted with trialkyne-containing or tetraalkyne-containing compound, the conversion of three-arm or four-arm PBd was around 95.5% or 87.0%, respectively. Several factors influencing the coupling efficiency were studied, including the molecular weight of the initial PBd-t-N3, arm numbers and the molar ratio of the azido group to the alkynyl group. The results indicated that the conversion of the target products would be promoted when the molecular weight of the PBd-t-N3 was low and the molar ratio of the azido to alkynyl groups was close to 1.     

溶剂诱导翻转Pickering乳液用于原位循环使用酶催化剂

Separation and recycling of catalysts are crucial for realizing the objectives of sustainable and green chemistry but remain a great challenge, especially for enzyme biocatalysts. In this work, we report a new solvent-induced reversible inversion of Pickering emulsions stabilized by Janus mesosilica nanosheets (JMSNs), which is then utilized as a strategy for the in situ separation and recycling of enzymes. The interfacial active solid particle JMSNs is carefully characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), nitrogen sorption experiments, Fourier transform infrared (FT-IR) spectroscopy, and thermogravimetric analysis (TGA).The JMSNs are demonstrated to show order-oriented mesochannels with a large specific surface area, and the hydrophobic octylgroup is selectively modified on one side of the nanosheets. Furthermore, the inversion is found to be a fast process that is strongly dependent on the interfacial activity of the solid emulsifier JMSNs. Such a phase inversion is also a general process that can be realized in various oil/water phasic systems, including ethyl acetate-water, octane-water, and cyclohexane-water systems. By carefully analyzing the capacity of JMSNs with different surface wettabilities for phase inversion, a triphase contact angle (θ) close to 90° and a critical oil-water ratio of 1 : 2 are identified as the key factors to achieve solvent-induced phase inversion via a catastrophic phase inversion mechanism. Importantly, this reversible phase inversion is suitable for the separation and recycling of enzyme biocatalysts that are sensitive to changes in the reaction medium. Specifically, during the reaction, the organic substrates are dissolved in the oil droplets and the water-soluble catalysts are dispersed in the water phase, while a majority of the product is released into the upper oil phase and the enzyme catalyst is confined inside the water droplets in the bottom layer after phase inversion. The perpendicular mesochannels of JMSNs provide a highly accessible reaction interface, and their excellent interfacial activity allows for more than 10 rounds of consecutive phase inversions by simply adjusting the ratio of oil to water in the system. Using the enzymatic hydrolysis kinetic resolution of racemic acetate as an example, our Pickering emulsion system shows not only a 3-fold enhanced activity but also excellent recyclability. Because no sensitive chemical reagents are used in this phase inversion process, the intrinsic activities of the catalysts can be preserved even after seven cycles. The current study provides an alternative strategy for the separation and recycling of enzymes, in addition to revealing a new innovative application for Janus-type nanoparticles.     

Enantioselective carboxylative cyclization of propargylic alcohol with carbon dioxide under mild conditions

An enantioselective carboxylative cyclization of propargylic alcohols and CO2 was realized under mild conditions,based on a kinetic resolution strategy,which enabled the synthesis of chiral cyclic carbonates and propargylic alcohols with promising yield and enantioselectivity simultaneously.     

Deposition of Phosphate Nanoparticles onto Textile Fabrics via Sol-gel Method and Their Kinetics Desorption Studies

In this paper, phosphate nanoparticles were coated on cotton(CO) and polyester(PES) textile surfaces by sol-gel method using tetraethylorthosilicate(TEOS) and chloropropyltriethoxysilane(CPTS) as silica precursors. The deposited nanoparticles were observed with scanning electronic microscopy energy-dispersive X-ray spectroscopy (SEM-EDX). The release kinetics of phosphorus(P) from these textiles into the aqueous medium(Aq), acid(Ac), and basic(Ba) artificial sweats were then studied. The released amount of phosphorus was evaluated by the inductively coupled plasma(ICP) according to ISO NF EN 16711-2 procedure. The results revealed that the release of P into the aqueous medium is lower than in the artificial sweat. The kinetics data[the phosphorus desorption amount(mg/g) as a function of time] were modeled according to five models:the first order, the second order, the third order, simple Elovich and parabolic diffusion. The suitable model was chosen based on the coefficient of determination(R²) and the calculation of the sum of the absolute errors(EABS), which describes the error between the theoretical and experimental values. SEM observations were also carried out on the fabrics after desorption in order to show the impact of desorption on their morphology. Furthermore, the impact of P release on the tensile strength of CO and PES fabrics was investigated using a uniaxial tensile test. The thermal stability of all samples before and after desorption was assessed by thermogravimetric analysis(ATG).     

催化动力学荧光光度法测定痕量铜

在氨性介质中,铜对H2O2氧化次甲基蓝褪色反应有强烈催化作用。研究发现,次甲基蓝的氧化产物在紫外线照射下发出强荧光,据此建立一种测定痕量铜的催化动力学荧光光度法。本法检出限达0．02ng／mL,铜的质量浓度在0～6ng／mL范围内与相对荧光强度（△F）有良好线性关系。