New method for the synthesis of β-bromostyrenes

A new stereoselective method was developed for the synthesis of -bromostyrenes (E/Z > 5/1) starting from hydrazones of aromatic aldehydes and bromoform in the presence of CuCl.     

Dianionic Titanyl and Vanadyl (Cation+)2[MIVO(Pc4−)]2− Phthalocyanine Salts Containing Pc4− Macrocycles

In this study, the titanyl and vanadyl phthalocyanine (Pc) salts (Bu₄N⁺)₂[M^IVO(Pc^4?)]^2? (M=Ti, V) and (Bu₃MeP⁺)₂[M^IVO(Pc^4?)]^2? (M=Ti, V) with [M^IVO(Pc^4?)]^2? dianions were synthesized and characterized. Reduction of M^IVO(Pc^2?) carried out with an excess of sodium fluorenone ketyl in the presence of Bu₄N⁺ or Bu₃MeP⁺ is exclusive to the phthalocyanine centers, forming Pc^4? species. During reduction, the metal +4 charge did not change, implying that Pc is an non‐innocent ligand. The Pc negative charge increase caused the C?N(pyr) bonds to elongate and the C?N(imine) bonds to alternate, thus increasing the distortion of Pc. Jahn–Teller effects are significant in the [eg(π*)]² dianion ground state and can additionally distort the Pc macrocycles. Blueshifts of the Soret and Q‐bands were observed in the UV/Vis/NIR when M^IVO(Pc^2?) was reduced to [M^IVO(Pc ^{. 3?})] ^{. ?} and [M^IVO(Pc^4?)]^2?. From magnetic measurements, [Ti^IVO(Pc^4?)]^2? was found to be diamagnetic and (Bu₄N⁺)₂[V^IVO(Pc^4?)]^2? and (Bu₃MeP⁺)₂[V^IVO(Pc^4?)]^2? were found to have magnetic moments of 1.72–1.78 μ_B corresponding to an S=1/2 spin state owing to V^IV electron spin. As a result, two latter salts show EPR signals with V^IV hyperfine coupling.     

Transition Metal Free Cycloamination of Prenyl Carbamates and Ureas Promoted by Aryldiazonium Salts

Upon treatment with aryldiazonium salts, prenyl carbamates and ureas undergo redox‐neutral azocycloamination. In general, N‐aryl O‐prenyl carbamates cyclize in a photocatalytic reaction with visible light and an organic dye. With electron‐deficient diazonium salts, electronic matching with an electron‐rich N‐aryl substituent results in a reaction proceeding in the ground state, without either light or photocatalyst. Cyclic voltammetry suggests that this radical reaction is initiated by hydrogen‐atom abstraction mediated by an aryl radical, followed by a radical addition cascade and proton‐coupled hole propagation. The reaction proceeds at room temperature in short reaction times, and a range of functional groups is tolerated.     

Gold catalysed Suzuki-Miyaura coupling of arenediazonium o-benzenedisulfonimides

Arenediazonium o-benzenedisulfonimides have been used as efficient electrophilic partners in Au(I) catalysed Suzuki coupling reactions. The synthetic protocol is general, easy and produced either biaryls or heteroaryl arenes in good yields (51 positive examples, average yield 80%). o-Benzenedisulfonimide was recovered at the end of the reactions and was reused to prepare the starting salts for further reactions. Mechanistic insights suggest that the o-benzenedisulfonimide anion act as an electron transfer agent and promotes a catalytic cycle which does not require the presence of photocatalysts or external oxidants.     

Synthesis and Crystal Structure of 18-Tungstotetranickel(II) diphosphate Na_(10){(PW_9O_(34))_2Ni_4(H_2O)_2}·26H_2O

1 INTRODUCTIONThe inorganic chemistry concentrating on polyoxometallates, is in a position to connect elementary building blocks and their derivatives in different ways, enabling people to synthesize a large variety of remarkable substances, especially those in the "nanoworld". Of particular importance is the anionic-type which has {MOx}-type building-block units, where M stands for the d block elements in high oxidation states.[1] In 1973 Weakley, Evans and Showell isolated[2] K10P2W1…     

Density functional theory studies on the dissociation energies of metallic salts: relationship between lattice and dissociation energies

The formation and physicochemical properties of polymer electrolytes strongly depend on the lattice energy of metal salts. An indirect but efficient way to estimate the lattice energy through the relationship between the heterolytic bond dissociation and lattice energies is proposed in this work. The heterolytic bond dissociation energies for alkali metal compounds were calculated theoretically using the Density Functional Theory (DFT) of B3LYP level with 6‐311+G(d,p) and 6‐311+G(2df,p) basis sets. For transition metal compounds, the same method was employed except for using the effective core potential (ECP) of LANL2DZ and SDD on transition metals for 6‐311+G(d,p) and 6‐311+G(2df,p) calculations, respectively. The dissociation energies calculated by 6‐311+G(2df,p) basis set combined with SDD basis set were better correlated with the experimental values with average error of ca. ±1.0% than those by 6‐311+G* combined with the LANL2DZ basis set. The relationship between dissociation and lattice energies was found to be fairly linear (r>0.98). Thus, this method can be used to estimate the lattice energy of an unknown ionic compound with reasonably high accuracy. We also found that the dissociation energies of transition metal salts were relatively larger than those of alkaline metal salts for comparable ionic radii. © 2001 John Wiley & Sons, Inc. J Comput Chem 22: 827–834, 2001     

Cyclocopolymerization of allyl‐acrylate quaternary ammonium salts with diallyldimethylammonium chloride

A series of copolymers of N,N‐dialkyl‐N‐2‐(methoxycarbonyl)allyl allyl ammonium chloride, N,N‐dialkyl‐N‐2‐(ethoxycarbonyl)allyl allyl ammonium chloride, and N,N‐dialkyl‐N‐2‐(t‐butoxycarbonyl)allyl allyl ammonium bromide with diallyldimethylammonium chloride (DADMAC) were prepared in water at 60 °C with 2,2′‐azo‐bis(2‐amidinopropane)dihydrochloride. A strong effect of ester substituents on cyclopolymerization was observed. The methyl and ethyl ester monomers showed high cyclization efficiencies during homopolymerizations and copolymerizations. Unexpectedly, the t‐butyl ester derivatives showed high crosslinking tendencies. Water‐soluble copolymers were obtained only with a decrease in the molar fraction of t‐butyl ester monomer below 30%. Relative reactivities of the allyl‐acrylate monomers in photopolymerizations were compared with the relative reactivity of DADMAC. Allyl‐acrylate monomers were much more reactive than DADMAC; the photopolymerization rate decreased in the following order: N,N‐morpholine‐N‐2‐(t‐butoxycarbonyl)allyl allyl ammonium bromide > N,N‐piperidyl‐N‐2‐(t‐butoxycarbonyl)allyl allyl ammonium bromide > N,N‐dibutyl‐N‐2‐(ethoxycarbonyl)allyl allyl ammonium chloride > N,N‐piperidyl‐N‐2‐(ethoxycarbonyl)allyl allyl ammonium chloride ∼ N,N‐morpholine‐N‐2‐(ethoxycarbonyl)allyl allyl ammonium chloride ∼ N,N‐piperidyl‐N‐2‐(methoxycarbonyl)allyl allyl ammonium chloride > N‐methyl‐N‐butyl‐N‐2‐(ethoxycarbonyl)allyl allyl ammonium chloride. Intrinsic viscosities of the polymers measured in 0.09 M NaCl ranged from 1.06 to 3.20 dL/g. The highest viscosities were obtained for copolymers of the t‐butyl ester monomers with piperidine and morpholine substituents. The copolymer of the t‐butyl ester with piperidine substituent and DADMAC was hydrolyzed in acid to give a polymer with zwitterionic character. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 640–649, 2001     

Use of Different Salt Solutions in Salting-Out TLC of Co(III) Complexes on Silica Gel

Saturated aqueous solutions of 28 different salts have been studied as a potential mobile phases for salting-out thin-layer chromatography, on silica gel, of a series of four mixed bis-aminocarboxylato cobalt(III) complexes. In addition, by linear regression analysis of chromatographic data obtained for fifteen mixed aminocarboxylato Co(III) complexes (four series) with solutions of ammonium chloride, three alkali metal chlorides, and four alkaline earth metal chlorides, four linear dependences previously established on different adsorbents with (NH₄)₂SO₄ solutions were confirmed. The qualities of the separations achieved with the salts were compared and Li⁺, Mg²⁺, and Ca²⁺ chlorides are proposed as the most suitable.     

Darstellung der Iminiumsalze CF3?NXCF2+MF6− (X = CH3, F und M = As,Sb) und CF3?NCl = CF2+ AsF6−

Preparation of the Iminium Salts CF₃? NX?CF₂⁺MF₆^? (X = CH₃, F and M = As, Sb) and CF₃? NCl?CF₂⁺ AsF₆^? The preparation of the iminiumsalts CF₃? NX?CF₂⁺ MF₆^? (X = CH₃, F and M = As, Sb) and CF₃? NCl?CF₂⁺ AsF₆^? is reported. The salts were characterized by NMR and infrared spectroscopy. CF₃? NCH₃?CF₂⁺MF₆^? decompose into MF₅ and (CF₃)₂NCH₃.     

Theoretical and experimental 1H, 13C and 15N NMR studies of N‐alkylation of substituted tetrazolo[1,5‐a]pyridines

The ¹⁵N as well as ¹H and ¹³C chemical shifts of nine substituted tetrazolopyridines and their corresponding tetrazolopyridinium salts have been determined by using NMR spectroscopy at the natural abundance level of all nuclei in CD₃CN. In this paper, we report, for the first time, the N‐alkylation reaction of electron deficient tetrazolopyridines. The treatment of tetrazolopyridines 5–13 with one equivalent of trialkyloxonium tetrafluoroborate leads to a mixture of two isomers, i.e. N3‐ and N2‐alkyl tetrazolo[1,5‐a]pyridinium salts. It has been observed that the N3‐isomer is always the major isomer, except in the case of the CF₃ substituent, where the two isomers are obtained in the same amount. The quaternary tetrazolopyridinium nitrogen N3 is shielded by around 100 ppm (parts per million) with respect to the parent tetrazolopyridine. Experimental data are interpreted by means of density functional theory (DFT) calculations, including solvent‐induced effects, within the conductor‐like polarizable continuum model (CPCM). Good agreements between theoretical and experimental ¹H, ¹³C and ¹⁵N NMR were found. The combination of multinuclear magnetic resonance spectroscopy with gauge including atomic orbital (GIAO) DFT calculations is a powerful tool in the structural elucidation for both neutral and cationic heterocycles and in the determination of the orientation of N‐alkylation of tetrazolopyridines. Copyright © 2009 John Wiley & Sons, Ltd.