Challenges and Development of Composite Solid Electrolytes for All-solid-state Lithium Batteries

All-solid-state lithium batteries are considered to be a new battery system with great development potential and application prospects due to the advantages of high energy density and high security.As a key component of all-solid-state lithium batteries,the development of solid-state electrolytes has received extensive attention in recent years,but most solid electrolytes still exhibit problems,such as low ion conductivity and poor interface compatibility.The design of composite solid-state electrolyte materials with both excellent electrochemical and mechanical properties is an effective way to develop all-solid-state lithium batteries.This review introduces different types of pure component solid electrolytes and analyzes their respective advantages and characteristics firstly.Furthermore,the research progress of composite electrolytes in preparation method,ionic conduction,suppression of lithium dendrites,and the improvement of electrochemical performances are reviewed from the perspective of composite electrolyte structure design,which is to meet different performance requirements.And the future development direction and trend of composite electrolytes are prospected.     

Investigation of electrochemical performance of MgNiO2 prepared by sol-gel synthesis route for aqueous-based supercapacitor application

In this work, we have successfully synthesized MgNiO₂ using a sol-gel wet chemical synthesis technique named MNO - 3. Electrochemical measurements in the presence of aqueous 1 M Li₂SO₄ electrolyte indicate that MNO - 3 samples exhibit a capacitance value of about 30 F/g and an energy density of about 20 Wh/kg. Subsequently, in the experiment involving aqueous 0.5 M Na₂SO₄ electrolyte system, it has been found that the capacitance for MNO - 3 sample is about 34 F/g and the energy density is about 23 Wh/kg for MNO - 3 sample. Finally, in the presence of aqueous-based 1 M Mg(ClO₄)₂ electrolyte, MNO - 3 sample is found to exhibit a capacitance of about 26 F/g and an energy density of about 17 Wh/kg, respectively. In all three electrolyte systems, the MNO -3 sample exhibit a long cycle capacitance retention of greater than 85% for 1000 charge-discharge cycles.     

石榴石固体电解质Li3BO3界面改性研究

石榴石固体电解质由于其高的离子电导率,对锂金属稳定等优点成为了下一代高性能锂电池的重要研究方向之一.但锂金属负极界面浸润性与锂枝晶问题限制了其应用.本文通过简单的液相沉积结合高温烧结的方法,在石榴石固体电解质片表面构建了一层稳定的硼酸三锂(Li3BO3)修饰层.研究表明,Li3BO3 修饰层可以有效改善石榴石固体电解质...     

室温离子液体增塑的纳米复合聚合物电解质研究

在室温离子液体N-乙基-N'-甲基咪唑四氟硼酸盐(EMIBF₄)增塑的凝胶聚合物电解质中加入氧化铝纳米粒子, 制备了一种纳米复合聚合物电解质(nanocomposite polymer electrolyte, NCPE). 通过示差扫描量热(DSC)、X射线衍射(XRD)、热重分析(TGA)、电化学阻抗谱(EIS)等手段对其进行了表征. 结果显示, 随着氧化铝纳米粒子含量的增加, NCPE的结晶度降低, 离子导电率升高. 但是, 纳米粒子的加入量过大时反而引起NCPE的离子导电率降低. 当纳米粒子填充量为w＝10%时, NCPE具有最高的室温离子导电率1.25×10^－3 S•cm^－1.     

锂离子电池凝胶聚合物电解质改性的研究现状

从目前凝胶聚合物电解质的研究现状及问题出发,重点介绍了两种改性凝胶聚合物电解质的方法。无机纳米粒子复合凝胶聚合物电解质能够降低结晶型聚合物的结晶度,提高其离子电导率,改善其力学性能和稳定性;多孔凝胶聚合物电解质能够实现在较宽的温度范围内能保持较高的离子电导率和较好的机械强度及尺寸稳定性。最后,对凝胶聚合物电解质的改性研究方向作出了展望。     

PREPARATION AND ELECTROCHEMICAL CHARACTERISTICS OF POLYMER ELECTROLYTE MEMBRANES BASED ON SAN/PVDF-HFP BLENDS

A copolymer of poly(acrylonitrile-co-styrene) (SAN) was synthesized via an emulsion polymerization method. Novel polymer electrolyte membranes cast from the blends of poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP), SAN and fumed silica (SiO2) are microporous and can be used in polymer lithium-ion batteries. The membrane shows excellent characteristics such as high ionic conductivity and good mechanical strength when the mass ratio between SAN and PVDF-HFP and SiO2 is 3.5/31.5/5. The ionic conductivity of the membrane soaked in a liquid electrolyte of 1 mol/L LiPF6/EC/DMC/DEC is 4.9×10-3 S cm-1 at 25℃. The membrane is electrochemical stable up to 5.5 V versus Li /Li in the liquid electrolyte. The influences of SiO2 content on the porosity and mechanical strength of the membranes were studied. Polymer lithium-ion batteries based on the membranes were assembled and their performances were also studied.     

现场热引发聚丙烯酸酯类电解质的性能及应用

应用热引发现场聚合方法制备聚丙烯酸酯类电解质,并考察其电化学性能.实验表明:该聚合物电解质具有 4. 5V的电化学稳定窗口,较高的室温电导率及良好的低温性能.当前驱体电解液中液态电解质含量为 85%时,其室温电导率为 3. 2×10-3S·cm-1, -30℃下的电导率达到 5. 6×10-4 S·cm-1.采用现场聚合技术制备的聚合物电池,其电化学性能与液态锂离子电池基本一致,首次充放电效率为 92. 1%, 1. 0C率放电容量为 0. 2C率的 95%, -20℃下的放电容量为室温容量的 72%,以 0. 5C率循环 300周后,仍保持初始容量的 85%以上.     

低维纳米材料在质子交换膜燃料电池电催化反应中的应用

在聚合物膜燃料电池中,电催化剂决定了电池的运行寿命及性能。本文按照材料维数的不同,分别介绍了近年来零维、一维和二维材料在聚合物膜燃料电池电极反应中应用的最新研究进展;并对各类聚合物膜燃料电池电催化反应的机理和研究侧重点进行了详细的介绍。     

丙烯腈-甲基丙烯酸酯网状凝胶聚合物电解质研究

用酯化方法合成了甲基丙烯酸缩乙二醇二酯,获得了纯净样品,对合成的网状凝胶型聚合物电解质的合成条件进行了系统研究,获得了丙烯腈-甲基丙烯酸缩乙二醇二酯-增塑剂?锂盐网状凝胶电解质。通过红外光谱、核磁、DSC、TG等对丙烯腈-甲基丙烯酸缩乙二醇二酯的结构性能进行了研究。DSC测试结果表明合成的网状聚合物是非晶的,软化点温度为90℃左右,随丙烯腈与甲基丙烯酸缩乙二醇二酯的比例不同而不同。另外TG测试本电解质材料在300℃左右才分解,是理想的高温锂聚合物电池电解质材料。网状凝胶电解质在EC含量达到66%时,室温电导率可达到2.5×103S/cm。     

Ag/TiO2对含酚废水的光电催化降解

Ag/TiO2对含酚废水的光电催化降解;Ag/TiO2; 光电催化; 苯酚;电解质