F and C spectra of fluorinated and partially fluorinated vinyl alkyl ethers

Fluorine, hydrogen, and ¹³C NMR spectral data have been obtained for vinyl alkyl ethers containing fluorines. Some of the molecules are perfluorinated and others include hydrogen, bromine, and chlorine substituents. New generalizations regarding FF spin-spin coupling are developed and used, along with previously recognized correlations, in the confirmation of structures and the assignments of resonances. ¹³C spectroscopy, especially the analysis of ¹³C¹⁹F coupling, is critical in several of the structure determinations. Chlorine isotope effects on fluorine chemical shifts are observed when the chlorine and fluorine are attached to the same carbon, and are also used in the structure analyses. Long-range couplings between fluorines in the vinyl group and fluorines in the alkyl group are interpreted in terms of molecular geometry which allows certain of the alkyl fluorines to “touch” the fluorines cis and gem to the ether oxygen but not the fluorine trans to the oxygen. Two bond ¹³C¹⁹F coupling across the vinyl double bond is found to vary dramatically with the electronegativity of the vinyl substituents in the ethers, in accordance with previous observations for olefins.     

Determination of 19-norandrosterone in CCQM-P68. NIST results using an isotope dilution liquid chromatography/tandem mass spectrometry method

The US National Institute of Standards and Technology (NIST) participated in an international interlaboratory study under the auspices of the Consultative Committee for Amount of Substance (CCQM) for the determination of 19-norandrosterone (19-NA) in urine, the principal metabolite of nandrolone and certain other synthetic testosterone substitutes banned for use by the World Antidoping Agency (WADA). Prior to this study, NIST developed a candidate reference measurement procedure based upon isotope dilution liquid chromatography/tandem mass spectrometry. This method was applied to a urine sample distributed to the participants in the study by the Australian National Measurement Institute, Pymble, Australia (NMIA). The NIST results were in very good agreement with those from the other participants, all of whom used methods based upon gas chromatography/mass spectrometry. All known significant sources of uncertainty were evaluated, resulting in a relative expanded uncertainty of less than 5% (coverage factor k = 2).     

Isotope dilution determination of polycyclic aromatic hydrocarbons in olive pomace oil by gas chromatography-mass spectrometry

A gas chromatographic (GC) method with mass spectrometry detection (MS) for the determination of eight polycyclic aromatic hydrocarbons (PAHs) in olive pomace oil has been developed. The oil was diluted with n-pentane and extracted by liquid-liquid partition with dimethyl sulphoxide (DMSO). After water addition and back-extraction with cyclohexane, a thin-layer chromatography on silica gel was performed as a further purification step. The PAHs spot was scraped off from the plate and the final extract was concentrated and analysed by GC-MS in full scan mode. The eight PAHs under investigation were determined in the presence of the corresponding labelled compounds added as internal standards to the sample at the beginning of the analytical process. The identified PAHs were then quantified by the isotope dilution methodology assuring the compensation of the concentration of each analyte for any variation in the sample preparation. The method precision was satisfactory with relative standard deviation (R.S.D.) values in the range 3.6-12.7% for all PAHs. The average recovery rates ranged from 69.0 to 97.5%. Accuracy was also calculated for benzo[k]fluoranthene, benzo[a]pyrene, indeno[1,2,3-cd]pyrene and benzo[ghi]perylene by analysing a certified reference material (CRM 458, coconut oil) with adequate results. All response curves exhibited a linear fit from 0.1 to 10 microg ml(-1) and the determination coefficients R2 were better than 0.9942. The limits of detection (0.1-0.4 microg kg(-1)) were acceptable when compared with the maximum permitted limit of 2 microg kg(-1) for each of the eight considered PAHs and 5 microg kg(-1) for the sum of the eight PAHs established by the Italian legislation. Measurement uncertainty was finally calculated identifying and quantifying the uncertainty components of the analytical process. The relative expanded uncertainties (Uc), expressed as percent values were in the range 8.5-11.4% thus appropriate for residues quantification in the range of concentrations considered in the present study.     

Solid phase immune reactions as monitored by sedimentation field-flow fractionation

Summary Sedimentation field-flow fractionation was shown to permit the precise evaluation of surface concentrations of human IgG, adsorbed to polystyrene latex spheres of different sizes. Unlike conventional techniques for measuring protein uptake by colloidal substrates, this method allowed a direct evaluation of mass adsorbed per unit area, without the need for potentially destructive labelling reactions. Thus, a four hour adsorption of IgG from a 3–10 fold excess of protein in solution yielded surface concentrations which were 1.4±0.1 mg/m² on a 272 nm latex and 1.9±0.1 mg/m² on a latex with a diameter of 142 nm. The lower value coincided with the estimated monolayer surface coverage. The IgG-PS 272 nm adsorption complex was shown to take up negligible amounts of HSA from a 10 mg/mL solution, while its specific uptake of a polyclonal rabbit anti-human IgG was 2.6 molecules per molecule of adsorbed antigen. The same ratio was found for the smaller particles. The surface concentration of adsorbed second antibody, often crucial in immunodiagnostic quantifications, was therefore found to be significantly enhanced by the increased substrate curvature presented by the smaller particles.Dedicated to Professor Leslie S. Ettre on the occasion of his 70th birthday.     

Reversible Melting of Thermally Fractionated Polyethylene

Different grades of linear low density polyethylenes (LLDPEs) have been quenched cooled step-wise and crystallised isothermally at (a series of increasing) temperatures in a DSC (thermal fractionated samples). These samples have been investigated by temperature modulated DSC (MDSC). The heat flow curves of the thermal fractionated materials were compared with those obtained from samples crystallised at a relatively slow cooling rate of 2 K min^-1(standard samples). The melting enthalpy obtained from the total heat flow of the thermal fractionated samples was 0-10 J g^-1higher than those of standard samples. The melting enthalpy obtained from the reversing heat flows was 13-31 J g^-1lower in the thermal fractionated samples than in the standard samples. The ratio of the reversing melting enthalpy to the total melting enthalpy increased with decreasing density of the PE. The melting temperature of the endotherms formed by the step-wise cooling was 9 K higher than the crystallisation temperature. This revised version was published online in July 2006 with corrections to the Cover Date.     

Cytochrome c–dimyristoylphosphatidylglycerol interactions studied by asymmetrical flow field-flow fractionation

Lipid membranes are well recognized ligands that bind peripheral and integral proteins in a specific manner and regulate their function. Cytochrome c (cyt c) is one of the partner peripheral protein that binds to the lipid membranes via electrostatic and hydrophobic interactions. In this study, asymmetrical flow field-flow fractionation (AsFlFFF) was used to compare the interactions of cyt c with the acidic phospholipid 1,2-dimyristoyl-sn-glycero-3-phospho-rac-glycerol (DMPG), oleic acid (OA), and sodium dodecyl sulfate (SDS). The influence of pH and the cyt c–lipid molar mass ratios were evaluated by monitoring the diffusion coefficients and particle diameter distributions obtained for the free and lipid-bound protein. The hydrodynamic particle diameter of cyt c (pI 10) was 4.1 nm at pH 11.4 and around 4.2 nm at pH 7.0 and 8.0. Standard molar mass marker proteins were used for calibration to obtain the molar masses of free cyt c and its complexes with lipids. AsFlFFF revealed the binding of cyt c to DMPG and to OA to be mainly electrostatic. In the absence of electrostatic interactions, minor complex formation occurred, possibly due to the extended lipid anchorage involving the hydrophobic cavity of cyt c and the hydrocarbon chains of DMPG or SDS. The possibility of the formation of the molten globule state of cyt c, induced by the interaction between cyt c and lipids, is discussed.Electronic Supplementary Material Supplementary material is available for this article at     

NMR studies of solid state—solvent and H/D isotope effects on hydrogen bond geometries of 1:1 complexes of collidine with carboxylic acids

¹H and ¹⁵N NMR spectra of 10 complexes exhibiting strong OHN hydrogen bonds formed by ¹⁵N-labeled collidine and different proton donors, partially deuterated in mobile proton sites, have been observed by low-temperature NMR spectroscopy using a low-freezing CDF₃/CDF₂Cl mixture as polar aprotic solvent. The following proton donors have been used: HCl, formic acid, acetic acid, various substituted benzoic acids and HBF₄. The slow hydrogen bond exchange regime could be reached below 140 K, which allowed us to resolve ¹⁵N signal splittings due to H/D isotopic substitution. The valence bond order model is used to link the observed NMR parameters to hydrogen bond geometries. The results are compared to those obtained previously [Magn. Reson. Chem. 39 (2001) S18] for the same complexes in the organic solids. The increase of the dielectric constant from the organic solids to the solution (30 at 130 K) leads to a change of the hydrogen bond geometries along the geometric correlation line towards the zwitterionic structures, where the proton is partially transferred from oxygen to nitrogen. Whereas the changes of spectroscopic and, hence, geometric parameters are small for the systems which are already zwitterionic in the solid state, large changes are observed for molecular complexes which exhibit almost a full proton transfer from oxygen to nitrogen in the polar liquid solvent.     

Crystallization and melting of polyethylene copolymers: Differential scanning calorimetry and atomic force microscopy studies

The Hoffman–Lauritzen theory of secondary, surface nucleation and growth was primarily relied upon for about 40 years after its introduction in about 1960 to rationalize the crystallization of flexible chain polymers into lamellar crystals. However, in about 1998, Strobl and coworkers introduced a different model for crystallization, based on the stage‐wise formation of lamellae. Two major components of this model were as follows: (1) the concept of the formation of a mesomorphic melt as a precursor to crystallization and (2) the control of the melting temperature range of lamellar crystals of homogeneous polyolefin copolymers by an inner degree of order or perfection rather than on the crystal thickness. The first concept is in disagreement with the HL theory and the second with the Gibbs‐Thomson theory, which associates melting temperature with lamella thickness. In the present study, differential scanning calorimetry and atomic force microscopy were successfully employed to monitor the in situ quiescent crystallization of polyethylene homopolymer and copolymer. In the present study, evidence was not found to support the concept of lamellae with equal thickness melting over a broad temperature range. Some evidence was found that might be interpreted to support the concept of a mesomorphic melt as a precursor to crystallization. At present, the model promoted by Strobl and coworkers appears to be at an uncertain stage at which strong proof or disproof are not available. However, this alternative model has injected a new vitality into the study of crystallization of flexible chain polymers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2369–2388, 2006     

Determination of uranium in marine sediment pore waters by isotope dilution inductively coupled plasma mass spectrometry

Inductively coupled plasma mass spectrometry (ICP-MS) was used in an isotope dilution mode to assay small-volume (0.25 ml) sediment pore waters for their uranium contents, using ²³⁶U as the spike. The only pretreatment required was a simple dilution by a factor of 20, which gave sufficient volume for three replicate analyses per sample. Rapid and accurate results were obtained for a variety of samples and standards, ranging in concentration from 0.05 to 10 ng U ml^?1. A suite of 30 samples can be analysed in less than 6 h by this method. The relative standard deviation was better than 1.9%, with a detection limit, based on 3σ background, of 2 pg U ml^?1 in solution (40 pg ml^?1 in samples). Sea water is a difficult matrix for ICP-MS and thus the method is generally suitable for uranium determinations in many other sample solutions.     

Combustibles,fuels and their combustion products: A view through carbon isotopes

Stable (i.e. non-radioactive) carbon-isotope composition (δ¹³C) in fuels has been extensively used as an indicator of the processes leading to the generation of their parent crude-oil. With the example of those used in Paris (France), this preliminary study isotopically characterizes fuels and combustibles, as well as the isotopic relations existing with their combustion by-products, i.e. gases (CO₂) and particles (bulk carbon). Results show that δ¹³C in fuels is clearly related to their physical state, with natural gas being strongly depleted in ¹³C while coal yields the highest δ¹³C, and liquid fuels display intermediate values. This relation is also valid for combustion gases, although δ¹³C values of combustion particles form a homogeneous range within which no clear distinction is observed. Combustion processes are accompanied by carbon-isotope fractionation (noted Δ¹³C) resulting from the combustion being incomplete. Carbon-isotope fractionation is strictly negative (Δ¹³C = ?1.3‰) during the formation of combustion gases, but generally positive in particle formation even if values close to zero are observed. Using simple mixing equations for describing the closed system formed by fuel, CO₂ and carbonaceous particles, we discuss the carbon budget for spark-ignition (unleaded gasoline) and diesel engines. Stable carbon isotopes corroborate the already-proved superior efficiency of diesel combustion mode compared with spark ignition, as carbon is preferentially transformed into CO₂.