取向聚对苯二甲酸乙二酯纤维的非等温结晶动力学

取向聚对苯二甲酸乙二酯纤维的非等温结晶动力学张志英，赵家森（天津纺织工学院材料科学系天津３００１６０）关键词取向高聚物，聚对苯二甲酸乙二酯，非等温结晶，结晶动力学研究高聚物结晶动力学常用的等温方法有光透射法、密度法、显微镜法、Ｘ－射线衍射法、差示扫描...     

多组分单体接枝聚丙烯/尼龙6反应共混物结晶行为研究

用多组分熔融接枝的方法将甲基丙烯酸缩水甘油酯 (GMA)和苯乙烯 (St)共同接枝到聚丙烯 (PP)上 ,制得具有较高GMA接枝率的多单体接枝聚丙烯 ,PP g (GMA co St) .将PP g (GMA co St)与尼龙 6 (PA6 )进行共混 ,利用扫描电镜 (SEM) ,差示扫描量热计 (DSC)和广角X射线衍射 (WAXD)对共混物的形态和结晶进行了研究 .在共混过程中 ,PP g (GMA co St)与PA6反应原位生成了PP g PA6 ,有效改善了共混物的相容性 ,分散相尺寸明显减小 .在PP g (GMA co St) PA6为 3 7的体系中 ,PP g (GMA co St)出现分级结晶现象 ,其在较低温度下的结晶属于均相成核结晶 .在PP g (GMA co St) PA6为 7 3的体系中 ,由于PA6相分散细微 ,在通常结晶温度下不结晶 ,而是在低温下均相成核与PP g (GMA co St)同时结晶 .WAXD证实体系中接枝PP ,PA6为分别结晶 ,无共晶或新的晶型产生     

Thermal evolution of ferromagnetic metallic glasses

A traditional TG apparatus was modified by placing two permanent magnets producing a controlled magnetic field (TG(M): Magneto Thermogravimetry). This technique proved to be useful to study both structural relaxation and crystallisation of ferromagnetic metallic glasses. Results obtained for the amorphous alloys Fe₄₀Ni₄₀P₁₄B₆ and Fe_62.5Co₆Ni_7.5Zr₆Nb₂Cu₁B₁₅, are reported in this paper. Structural relaxation can be evaluated by measuring changes in Curie temperature induced by thermal treatments. Crystallisation in TG(M) is detected through a change in the measured apparent mass (difference between the sample mass and magnetic force driving it upward). These results were confirmed by DSC analysis. Whether the obtained crystalline phase is ferromagnetic, it can be identified through its Curie temperature, measured by TG(M). In fact the value of 770°C measured as Curie temperature of crystallised Fe_62.5Co₆Ni_7.5Zr₆Nb₂Cu₁B₁₅led to conclude that the only ferromagnetic crystalline phase is a-Fe. These hypothesis was confirmed by XRD analysis, showing that the first crystallisation yields to a-Fe nanocrystals. This revised version was published online in July 2006 with corrections to the Cover Date.     

Synthesis of molecular sieve AlPO4-12

A member of the novel family of crystalline microporous aluminophosphates, AlPO₄-12, was synthesized by hydrothermal crystallization using different aluminum-containing compounds. Three new crystalline phases were obtained by varying the composition of the reaction mixture. The effect of the synthesis conditions on the hudrothermal process and the kinetics of crystallization are discussed. The apparent activation energies obtained for AlPO₄-12 are 20.9 and 14.6 kcal/mol for nucleation and crystallization, respectively. The adsorption isotherms of one AlPO₄-12 product were measured.     

On the effect of montmorillonite in the curing reaction of epoxy nanocomposites

The procedure for the fabrication of epoxy-based polymer layered silicate nanocomposites is important in respect of the nanostructure that is developed. To further our understanding of this, the influence of an organically modified clay (montmorillonite, MMT) on the curing kinetics of an epoxy resin has been studied by differential scanning calorimetry. Clay loadings of 10 and 20 mass% are used, and isothermal as well as dynamic cures have been investigated. For both cure schedules the effect of the MMT is to advance the reaction. Kinetic analysis yields values for the activation energy, but shows that the reaction cannot be described simply by the usual autocatalytic equation. The glass transition of the cured nanocomposites is lower than that for the cured neat resin, a result that is attributed to homopolymerisation taking place in addition to the epoxy–amine reaction.     

一种计算稀土材料陷阱深度的新方法

表征陷阱材料的主要物理量是陷阱深度, 准确计算出陷阱深度对于研究陷阱材料具有重要的意义. 从能带模型出发, 利用速率方程分析了整个热释光过程, 提出了一种计算稀土材料陷阱深度的新方法, 替代以往利用单分子或双分子近似计算陷阱深度的方法. 以SrAl2O4：Eu^2＋, Dy^3＋及Sr4Al14O25：Eu^2＋, Dy^3＋材料为研究对象, 计算了陷阱深度. 研究表明, 这种计算方法能更准确、真实地描述其物理过程.     

Catalysis of nucleophilic substitution reactions in supramolecular systems

The factors determining the catalytic effect of supramolecular systems on the nucleophilic substitution reactions are analyzed. The role of the structural and phase transitions of nanoaggregates in the catalytic mechanism are determined. The substrate specificity is shown for different structures of the supramolecular composition.     

Kinetics of the Oxidative Dehydrogenation of Propane over a VMgO Catalyst

The reaction kinetics of the oxidative dehydrogenation of propane was studied at 475-550℃ over a VMgO catalyst. Vanadium-magnesium-oxides are among the most selective and active catalysts for the dehydrogenation of propane to propylene. Selectivity to propylene up to about 60% was obtained at 10% conversion, but the selectivity decreased with increasing conversion. No oxygenates were detected, the only by-products were CO and CO2. The reaction rate of propane was found to be first order in propane and close to zero order in oxygen, which is in agreement with a Mars van Krevelen mechanism with the activation of the hydrocarbon as the rate determining step. The activation energy of the conversion of propane was found to be 122±6 kJ/mol.     

Na_（1－x）Zr（2－x）Nb_xP_3O_（12）系列化合物的水热晶化研究

采用水热晶化反应，制备出传统需要高温固相反应合成的掺杂ＮＡＳＩＣＯＮ化合物Ｎａ（１－ｘ）Ｚｒ（２－ｘ）ＮｂｘＰ３Ｏ１２（０＜ｘ＜１），并应用ＸＲＤ、ＩＲ方法对产物的晶体结构进行了研究，表明水热晶化产物是纯的物相并具有与ＮａＺｒ２Ｐ３Ｏ１２相同的结构．固体３１ＰＮＭＲ研究证实Ｎｂ（５＋）部分取代了Ｚｒ（４＋）所在位置，参与骨架的组成，并统计分布于结构中．水热晶化产物与固相反应产物具有相同的离子电导性能．     

Molecular beams and model catalysis: activity and selectivity of specific reaction centers on supported nanoparticles.

Reaction kinetics on nanometer-scale particles are different from those on extended surfaces of bulk materials. This fact has been utilized for a long time to empirically maximize the performance of heterogeneous catalysts, but the understanding of the underlying effects is poor at the microscopic level. Modern molecular beam-based methods, however, allow us to derive very detailed kinetic information on catalytically active surfaces. In combination with structurally highly controlled model catalysts, microscopic insights into the activity and selectivity of specific reaction centers on catalyst nanoparticles can be obtained. This combined approach is illustrated through simple model reactions.